Fuel Injector Clinic 525cc High-Z Fuel Injector Set (is190-0525h) - 2010-2012 Hyundai Genesis 2.0T
Upgrade the fuel delivery in your 2010-2012 Hyundai Genesis 2.0T with the Fuel Injector Clinic 525cc High-Z Fuel Injector Set. Part number is190-0525h includes four 525cc/min modified saturated, high-impedance ball-and-seat injectors engineered for excellent linearity, consistent short pulse width repeatability, and precise fuel delivery. Whether you are upgrading the fuel system as part of a performance build or simply need greater injector capability than the factory setup can provide, this matched FIC set gives your tuner a consistent foundation for accurate calibration and dependable drivability.
Fuel Injector Clinic precisely flow matches each injector set to within 1 percent. Every injector is individually numbered, with its results documented on the detailed flow sheet supplied with the set. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) using CF-16B calibration fluid maintained at 90 degrees F. Tight manufacturing tolerances and superior short pulse width control help provide predictable injector behavior across varying engine loads, making these injectors easier to tune while maintaining the drivability expected from a street-driven Genesis 2.0T.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is190-0525h
- Application: 2010-2012 Hyundai Genesis 2.0T
- Injector Quantity: 4
- Flow Rating: 525cc/min
- Injector Type: Modified ball-and-seat
- Impedance: High impedance / High-Z
- Operation: Modified saturated
- Flow Matching: Precisely matched to within 1 percent
- Testing Pressure: 43.5 PSI (3 Bar)
- Testing Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoD4
- O-Rings: Included for the intended factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 525cc/min performance fuel injectors engineered for the 2010-2012 Hyundai Genesis 2.0T
- Modified saturated, high-impedance injector configuration
- Ball-and-seat injector design
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector operation
- Superior short pulse width control helps support smooth drivability
- Precisely flow matched to within 1 percent
- Each injector is individually numbered
- Detailed injector results supplied on the included flow sheet
- Flow tested and rated at 43.5 PSI (3 Bar)
- Tested using CF-16B calibration fluid maintained at 90 degrees F
- Tight manufacturing tolerances help provide consistent injector performance and straightforward calibration
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoD4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the intended factory application
- Fuel Injector Clinic uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against failures caused by original manufacturing defects
Fitment
- 2010 Hyundai Genesis 2.0T
- 2011 Hyundai Genesis 2.0T
- 2012 Hyundai Genesis 2.0T
The is190-0525h injector set requires an injector connector change when used with the factory wiring harness. PGTUSC4 solder-in pigtails are included and can be used to replace the existing injector connectors. Optional PADPUtoD4 plug-and-play adapters provide the required connector conversion without cutting or soldering the factory harness. Fuel Injector Clinic also supplies the O-rings required for the intended factory application. If your Genesis 2.0T uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
How are the Fuel Injector Clinic is190-0525h injectors matched?
Fuel Injector Clinic precisely flow matches the four injectors in each set to within 1 percent. Each injector is individually numbered, and its results are documented on the detailed flow sheet supplied with the set. This consistency helps provide balanced fuel delivery across the engine and gives the tuner dependable injector performance for calibration.
Do the is190-0525h injectors plug directly into the factory Genesis 2.0T wiring harness?
The injector connector must be converted. PGTUSC4 solder-in pigtails are included with the set, or optional PADPUtoD4 plug-and-play adapters can be used to connect the injectors to the stock harness without cutting or soldering.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Fuel injectors are a critical part of any properly matched performance fuel system, and choosing the right injector involves more than simply selecting a flow rating. Beefcake Racing can help you determine whether the Fuel Injector Clinic is190-0525h is appropriate for your Genesis 2.0T combination and make sure you have the correct connection option for your installation. For fitment, fuel-system, or ordering assistance, email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
