Fuel Injector Clinic 445cc Fuel Injector Set - High Z (2010-2012 Hyundai Genesis 2.0T) (is190-0445h)
Upgrade the fuel delivery in your 2010-2012 Hyundai Genesis 2.0T with the Fuel Injector Clinic 445cc High-Z Fuel Injector Set. Part number is190-0445h includes four 445cc modified saturated, high-impedance ball and seat injectors engineered for excellent linearity, consistent short pulse width operation, and dependable drivability. With precise flow matching and tight manufacturing tolerances, this set gives tuners the consistent fuel delivery needed to properly calibrate a performance Genesis 2.0T.
Fuel Injector Clinic precisely flow matches each high-performance injector set to within 1%. Every injector in the set is individually numbered, with its results documented on the detailed flow sheet included with the injectors. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel temperature maintained at 90 degrees F using CF-16B calibration fluid. The combination of accurate matching, strong short pulse width control, and controlled testing helps deliver predictable fueling and excellent drivability.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is190-0445h
- Injector Quantity: 4
- Flow Rating: 445cc
- Injector Type: Modified saturated / high impedance
- Injector Design: Ball and seat
- Flow Matching: Precisely flow matched to within 1%
- Test Pressure: 43.5 PSI (3 Bar)
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring: PGTUSC4 solder-in pigtails
- Optional Wiring Adapter: PADPUtoD4 plug-and-play adapters
- Seals: Includes the O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 445cc high-impedance fuel injectors for the 2010-2012 Hyundai Genesis 2.0T
- Precisely flow matched to within 1% for consistent fuel delivery across the complete set
- Each injector is individually numbered with its results provided on the included detailed flow sheet
- Modified saturated, high-impedance ball and seat injector design
- Excellent linearity supports predictable injector operation and accurate tuning
- Superior short pulse width control helps maintain smooth idle and part-throttle drivability
- Tight manufacturing tolerances promote consistent injector performance
- Flow tested and rated at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature
- Testing performed using CF-16B calibration fluid
- Includes PGTUSC4 solder-in pigtails for the required injector connector conversion
- Optional PADPUtoD4 plug-and-play adapters allow installation without cutting or soldering the factory wiring harness
- Supplied with the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
This injector set requires a change to the injector connectors on the vehicle's wiring harness. PGTUSC4 pigtails are included and can be soldered into the factory harness to replace the original injector connectors. For an installation that does not require cutting or soldering, optional PADPUtoD4 plug-and-play adapters can be used to connect these injectors to the factory harness.
Fuel Injector Clinic chooses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The set is configured with the O-rings needed for the listed factory application. If your Genesis 2.0T uses an aftermarket fuel rail or another non-standard fuel system configuration, contact Beefcake Racing before ordering to verify proper fitment.
Fitment
- 2010 Hyundai Genesis 2.0T
- 2011 Hyundai Genesis 2.0T
- 2012 Hyundai Genesis 2.0T
FAQs
Are the Fuel Injector Clinic is190-0445h injectors flow matched?
Yes. Fuel Injector Clinic precisely flow matches these high-performance injectors to within 1%. Each injector is individually numbered, and a detailed flow sheet documenting the results for the injectors in the set is included.
Do these 445cc injectors require changes to the factory Hyundai wiring harness?
Yes. PGTUSC4 solder-in pigtails are included for converting the injector connectors. If you do not want to cut or solder the factory harness, optional PADPUtoD4 plug-and-play adapters can be purchased for the installation.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components. Whether you need help confirming injector fitment, choosing the proper wiring adapters, or matching your fuel system components to your Genesis 2.0T build, our performance specialists are ready to help you get the right parts for your combination.
Email: sales@beefcakeracing.com
Phone: 1-855-827-7223
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
