Fuel Injector Clinic 650cc Fuel Injector Set - High Z (is188-0650h) - 2009-2026 Nissan R35 GT-R
Upgrade the fueling capability of your 2009-2026 Nissan R35 GT-R with the Fuel Injector Clinic 650cc High-Z Fuel Injector Set. The is188-0650h includes six 650cc saturated, high impedance ball and seat injectors engineered to provide increased fuel delivery along with the linearity and short pulse width repeatability needed for a responsive, properly tuned performance build. For R35 owners looking for more fueling capability while maintaining excellent control and drivability, this matched injector set provides a proven step up for modified street and performance applications.
Fuel Injector Clinic precisely matches each is188-0650h set using proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTUSC6 solder-in pigtails and the O-rings required for the listed factory application are included, while optional PADPUtoD6 plug-and-play adapters provide an installation solution without cutting or soldering the factory harness. Every injector is covered against failure caused by defects in original manufacture by Fuel Injector Clinic's lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is188-0650h
- Application: Nissan R35 GT-R
- Injector Flow Rate: 650cc/min
- Injector Quantity: 6
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Pigtails: PGTUSC6 solder-in pigtails
- Optional Plug-and-Play Adapters: PADPUtoD6
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 650cc High-Z fuel injectors for Nissan R35 GT-R applications
- Saturated, high impedance ball and seat injector design
- Increased fuel delivery for modified and performance-oriented R35 GT-R builds
- Excellent linearity for predictable injector operation
- Strong short pulse width repeatability for precise low-pulse-width fueling
- Superior short pulse width control supports excellent tunability and drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 solder-in wiring pigtails
- Optional PADPUtoD6 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Match Technology
Consistency matters when tuning a six-injector fuel system, which is why Fuel Injector Clinic precisely matches the is188-0650h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information. Combined with excellent linearity and short pulse width repeatability, this detailed injector data helps give tuners the information needed to accurately calibrate fuel delivery throughout the engine's operating range.
Wiring and Installation
The Fuel Injector Clinic is188-0650h requires an injector plug conversion. PGTUSC6 solder-in pigtails are included and can be installed in place of the existing injector plugs on the vehicle's wiring harness. For an installation that does not require cutting or soldering the factory harness, optional PADPUtoD6 plug-and-play adapters are available.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors. The is188-0650h includes the O-rings required for the listed factory application. If your R35 GT-R uses an aftermarket fuel rail or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
Fitment
- 2009 Nissan R35 GT-R
- 2010 Nissan R35 GT-R
- 2011 Nissan R35 GT-R
- 2012 Nissan R35 GT-R
- 2013 Nissan R35 GT-R
- 2014 Nissan R35 GT-R
- 2015 Nissan R35 GT-R
- 2016 Nissan R35 GT-R
- 2017 Nissan R35 GT-R
- 2018 Nissan R35 GT-R
- 2019 Nissan R35 GT-R
- 2020 Nissan R35 GT-R
- 2021 Nissan R35 GT-R
- 2022 Nissan R35 GT-R
- 2023 Nissan R35 GT-R
- 2024 Nissan R35 GT-R
- 2025 Nissan R35 GT-R
- 2026 Nissan R35 GT-R
FAQs
How are Fuel Injector Clinic is188-0650h injectors matched and tested?
Fuel Injector Clinic precisely matches the is188-0650h set using its proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Do the Fuel Injector Clinic is188-0650h injectors require a wiring change?
Yes. The is188-0650h includes PGTUSC6 solder-in pigtails for replacing the existing injector plugs on the wiring harness. Optional PADPUtoD6 plug-and-play adapters are available for connecting the injectors without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for Nissan R35 GT-R street, track, and performance builds. Choosing the correct injector size, wiring solution, and supporting fuel system components is critical to building a properly matched fuel system. If you have questions about the Fuel Injector Clinic is188-0650h, PGTUSC6 pigtails, PADPUtoD6 adapters, or compatibility with your specific GT-R setup, our performance specialists are ready to help. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
