Fuel Injector Clinic 365cc Fuel Injector Set - High Z (is186-0365h) - 2003-2009 Nissan 350Z / 2009-2021 Nissan 370Z
Upgrade your Nissan 350Z or 370Z fuel system with the Fuel Injector Clinic 365cc High-Z Fuel Injector Set. Designed for VQ35 and VQ37 applications using the top-feed injector configuration, this set includes six 365cc saturated, high impedance ball and seat injectors. Excellent linearity and short pulse width repeatability provide the consistent fuel delivery and precise control tuners need, making the is186-0365h a strong choice for modified VQ-powered street and performance applications where drivability matters just as much as increased fueling capability.
Fuel Injector Clinic precisely flow matches each injector set to within 1 percent. Every injector is individually numbered, with detailed results supplied on the included flow sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances help make these injectors easy to tune while maintaining excellent drivability. The set includes the O-rings required for the listed application and PGTUSC6 solder-in pigtails, while optional PADPUtoD6 plug-and-play adapters provide an installation option without cutting or soldering the factory harness. Every injector is covered against failure caused by defects in original manufacture by Fuel Injector Clinic's lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is186-0365h
- Application: Nissan 350Z / 370Z with VQ35 / VQ37 engine
- Injector Configuration: Top-feed
- Injector Flow Rate: 365cc/min
- Injector Quantity: 6
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Flow Matching: Precisely flow matched to within 1 percent
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Pigtails: PGTUSC6 solder-in pigtails
- Optional Plug-and-Play Adapters: PADPUtoD6
- O-Rings: Included for the listed application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 365cc fuel injectors for Nissan 350Z and 370Z VQ35 / VQ37 applications
- Top-feed injector configuration
- Saturated, high impedance ball and seat injector design
- Excellent linearity for consistent fuel delivery across the operating range
- Strong short pulse width repeatability for precise injector control
- Superior short pulse width control helps provide excellent tunability and drivability
- Tight manufacturing tolerances for consistent injector performance
- Precisely flow matched to within 1 percent
- Each injector is individually numbered with detailed test results supplied with the set
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the listed application
- Includes PGTUSC6 solder-in wiring pigtails
- Optional PADPUtoD6 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
The Fuel Injector Clinic is186-0365h requires an injector plug conversion. PGTUSC6 solder-in pigtails are included and can be installed in place of the existing injector plugs on the vehicle's wiring harness. For installers who prefer to retain the factory harness without cutting or soldering, optional PADPUtoD6 plug-and-play adapters provide the required connection.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors. The injectors are supplied with the O-rings required for the listed application. If your 350Z or 370Z uses an aftermarket fuel rail or another unusual fuel system configuration, contact Beefcake Racing before ordering to confirm proper fitment.
Fitment
- 2003 Nissan 350Z
- 2004 Nissan 350Z
- 2005 Nissan 350Z
- 2006 Nissan 350Z
- 2007 Nissan 350Z
- 2008 Nissan 350Z
- 2009 Nissan 350Z
- 2009 Nissan 370Z
- 2010 Nissan 370Z
- 2011 Nissan 370Z
- 2012 Nissan 370Z
- 2013 Nissan 370Z
- 2014 Nissan 370Z
- 2015 Nissan 370Z
- 2016 Nissan 370Z
- 2017 Nissan 370Z
- 2018 Nissan 370Z
- 2019 Nissan 370Z
- 2020 Nissan 370Z
- 2021 Nissan 370Z
FAQs
Do the Fuel Injector Clinic is186-0365h injectors require a wiring change?
Yes. The is186-0365h includes PGTUSC6 solder-in pigtails for replacing the existing injector plugs on the wiring harness. Optional PADPUtoD6 plug-and-play adapters are available for connecting the injectors without cutting or soldering the factory harness.
How are the Fuel Injector Clinic is186-0365h injectors matched and tested?
Fuel Injector Clinic precisely flow matches the injector set to within 1 percent. Each injector is individually numbered and supplied with detailed test results. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances help provide excellent tunability and drivability.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for Nissan 350Z and 370Z street, track, and high-performance builds. Choosing the correct injector size and wiring solution is an important part of building a properly matched VQ35 or VQ37 fuel system. If you have questions about the Fuel Injector Clinic is186-0365h, PGTUSC6 pigtails, PADPUtoD6 adapters, or compatibility with your fuel system, our performance specialists are ready to help. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
