Fuel Injector Clinic 775cc Fuel Injector Set - High Z (is185-0775h) - 1989-2002 Nissan Skyline RB26
Upgrade the fuel system on your 1989-2002 Nissan Skyline RB26 with the Fuel Injector Clinic 775cc High-Z Fuel Injector Set. The is185-0775h includes six 775cc saturated, high impedance ball and seat injectors engineered to provide increased fuel delivery while maintaining the linearity, short pulse width repeatability, and precise control needed for a responsive performance build. For modified RB26 applications that have outgrown the factory fuel system, this matched injector set delivers the consistency and tunability needed to support a properly calibrated performance combination.
Fuel Injector Clinic precisely matches each is185-0775h set using proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTUSC6 solder-in pigtails and the O-rings required for the listed factory application are included, while optional PADPUtoJ6 plug-and-play adapters provide an installation option without cutting or soldering the factory harness. Every injector is covered against failure caused by defects in original manufacture by Fuel Injector Clinic's lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is185-0775h
- Application: Nissan Skyline RB26
- Injector Flow Rate: 775cc/min
- Injector Quantity: 6
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Pigtails: PGTUSC6 solder-in pigtails
- Optional Plug-and-Play Adapters: PADPUtoJ6
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 775cc High-Z fuel injectors for Nissan Skyline RB26 applications
- Saturated, high impedance ball and seat injector design
- Increased fuel delivery for modified and performance-oriented RB26 builds
- Excellent linearity for predictable injector operation
- Strong short pulse width repeatability for precise low-pulse-width fueling
- Superior short pulse width control supports excellent tunability and drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 solder-in wiring pigtails
- Optional PADPUtoJ6 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes the O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Match Technology
Consistent fuel delivery across all six cylinders is critical when tuning an RB26, which is why Fuel Injector Clinic precisely matches the is185-0775h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information. Combined with excellent linearity and short pulse width repeatability, this detailed injector data gives tuners the information needed to accurately calibrate fuel delivery throughout the engine's operating range.
Wiring and Installation
The Fuel Injector Clinic is185-0775h requires an injector plug conversion when used with the factory wiring harness. PGTUSC6 solder-in pigtails are included and can be installed in place of the existing injector plugs. For an installation that does not require cutting or soldering the factory harness, optional PADPUtoJ6 plug-and-play adapters are available.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors. The is185-0775h includes the O-rings required for the listed factory application. If your RB26 uses an aftermarket fuel rail or another unusual fuel system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
Fitment
- 1989 Nissan Skyline RB26
- 1990 Nissan Skyline RB26
- 1991 Nissan Skyline RB26
- 1992 Nissan Skyline RB26
- 1993 Nissan Skyline RB26
- 1994 Nissan Skyline RB26
- 1995 Nissan Skyline RB26
- 1996 Nissan Skyline RB26
- 1997 Nissan Skyline RB26
- 1998 Nissan Skyline RB26
- 1999 Nissan Skyline RB26
- 2000 Nissan Skyline RB26
- 2001 Nissan Skyline RB26
- 2002 Nissan Skyline RB26
FAQs
How are Fuel Injector Clinic is185-0775h injectors matched and tested?
Fuel Injector Clinic precisely matches the is185-0775h set using proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Do Fuel Injector Clinic is185-0775h injectors require a wiring change?
Yes. The is185-0775h includes PGTUSC6 solder-in pigtails for replacing the existing injector plugs on the wiring harness. Optional PADPUtoJ6 plug-and-play adapters are available for installing the injectors without cutting or soldering the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for Nissan Skyline RB26 street, track, and performance builds. Choosing the correct injector size, wiring solution, and supporting fuel system components is critical to building a properly matched fuel system. If you have questions about the Fuel Injector Clinic is185-0775h, PGTUSC6 pigtails, PADPUtoJ6 adapters, or compatibility with your specific RB26 setup, our performance specialists are ready to help. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
