Fuel Injector Clinic 2150cc Fuel Injector Set for 240SX 14mm Setup - High Z (is182-2150h) - 1989-1998 Nissan 240SX S13 / S14
Feed a serious 1989-1998 Nissan 240SX build with the massive fuel delivery of the Fuel Injector Clinic 2150cc High-Z Fuel Injector Set for 14mm setups. Designed for S13 and S14 performance applications that demand extreme fuel flow without sacrificing the injector control needed for drivability, this set includes four 2150cc saturated, high impedance ball and seat injectors. Excellent linearity, short pulse width repeatability, and advanced dynamic matching help make these injectors controllable at low pulse widths while delivering the capacity required for demanding high-horsepower combinations.
Because of the exceptional flow rate of the 2150cc injector, Fuel Injector Clinic uses its proprietary Data Match Technology with dynamic flow matching to significantly improve ECU control in the sub-2ms pulse width range typically encountered during idle and part-throttle operation. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTDEN4 solder-in pigtails and the O-rings required for the listed application are included. Every injector is covered against failure caused by defects in original manufacture by Fuel Injector Clinic's lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is182-2150h
- Application: Nissan 240SX 14mm setup
- Injector Flow Rate: 2150cc/min
- Injector Quantity: 4
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology with dynamic flow matching
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Pigtails: PGTDEN4 solder-in pigtails
- O-Rings: Included for the listed application
- MTBE Compatibility: Not compatible with MTBE oxygenated fuels such as Q16 or VP Import
- Alcohol-Based Fuel Care: Follow Fuel Injector Clinic care instructions when using E85 or other alcohol-based fuels, particularly during prolonged periods of disuse
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 2150cc high impedance fuel injectors for Nissan 240SX 14mm setups
- Saturated, high impedance ball and seat injector design
- Massive flow capacity for demanding high-horsepower applications
- Excellent linearity and short pulse width repeatability
- Advanced short pulse width control helps maintain tunability and drivability
- Dynamic Data Match Technology improves ECU control in the sub-2ms pulse width range
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the listed application
- Includes PGTDEN4 solder-in wiring pigtails
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Fuel Compatibility and Important MTBE Warning
CAUTION: Fuel Injector Clinic specifies that the internal construction of its 2150cc injector contains a seal that has been found to swell when exposed to MTBE in oxygenated fuels such as Q16 or VP Import. This swelling can cause a significant reduction in injector flow, making the is182-2150h unsuitable for use with MTBE oxygenated fuels.
When using E85 or other alcohol-based fuels, follow Fuel Injector Clinic's injector care instructions. Prolonged disuse while the injectors remain exposed to alcohol-based fuel can create potential corrosion issues, making proper care especially important for vehicles that sit for extended periods.
240SX 14mm Setup and Installation
The Fuel Injector Clinic is182-2150h is specifically configured for Nissan 240SX applications using the 14mm injector setup. PGTDEN4 solder-in pigtails are included with the injector set for the required wiring connection.
Modified Nissan 240SX fuel systems can use different injector, O-ring, and fuel rail configurations. Fuel Injector Clinic also offers a separate 11mm version of its 2150cc 240SX injector set, so if your S13 or S14 uses an aftermarket fuel rail or another non-standard fuel system configuration, contact Beefcake Racing before ordering to confirm that the is182-2150h 14mm setup is correct for your combination.
Fitment
- 1989 Nissan 240SX S13 - 14mm Setup
- 1990 Nissan 240SX S13 - 14mm Setup
- 1991 Nissan 240SX S13 - 14mm Setup
- 1992 Nissan 240SX S13 - 14mm Setup
- 1993 Nissan 240SX S13 - 14mm Setup
- 1994 Nissan 240SX S13 - 14mm Setup
- 1995 Nissan 240SX S14 - 14mm Setup
- 1996 Nissan 240SX S14 - 14mm Setup
- 1997 Nissan 240SX S14 - 14mm Setup
- 1998 Nissan 240SX S14 - 14mm Setup
FAQs
Can Fuel Injector Clinic is182-2150h injectors be used with Q16 or VP Import?
No. Fuel Injector Clinic specifically states that its 2150cc injector is unsuitable for MTBE oxygenated fuels such as Q16 and VP Import. MTBE can cause an internal seal to swell, resulting in a significant reduction in injector flow. Fuel Injector Clinic's care instructions should also be followed when using E85 or other alcohol-based fuels, particularly when the vehicle will sit for an extended period.
How does Fuel Injector Clinic maintain low pulse width control with a 2150cc injector?
Fuel Injector Clinic uses Data Match Technology with dynamic flow matching during production of its 2150cc injector sets. This significantly improves the ECU's ability to control these extremely high-flow injectors in the sub-2ms pulse width range commonly encountered during idle and part-throttle operation, helping deliver the precise control required from a properly tuned high-performance setup.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for serious Nissan 240SX street, track, and high-horsepower builds. With multiple injector sizes and both 11mm and 14mm configurations available, choosing the correct injector setup is critical to building a properly matched fuel system. If you have questions about the Fuel Injector Clinic is182-2150h, fuel compatibility, your 14mm setup, or compatibility with an aftermarket fuel system, our performance specialists are ready to help. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
