Fuel Injector Clinic 525cc Fuel Injector Set for 240SX 14mm Setup - High Z (is182-0525h) - 1989-1998 Nissan 240SX S13 / S14
Upgrade the fuel system in your 1989-1998 Nissan 240SX with the Fuel Injector Clinic 525cc High-Z Fuel Injector Set for 14mm setups. Designed for S13 and S14 performance applications that need increased fuel delivery while retaining precise injector control and excellent drivability, this set includes four 525cc saturated, high impedance ball and seat injectors. Excellent linearity, short pulse width repeatability, and tight manufacturing tolerances provide consistent fuel delivery across the operating range, giving tuners the control needed to properly dial in a modified 240SX.
Each injector is individually serial numbered and precisely matched using Fuel Injector Clinic's proprietary Data Match Technology, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injector set is flow matched to within 1 percent and flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. The injectors are supplied with the O-rings required for the listed application, and PGTUSC4 solder-in pigtails are included. Every injector is covered against failure caused by defects in original manufacture by Fuel Injector Clinic's lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is182-0525h
- Application: Nissan 240SX 14mm setup
- Injector Flow Rate: 525cc
- Injector Quantity: 4
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Flow Matching: Matched to within 1 percent
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Pigtails: PGTUSC4 solder-in pigtails
- O-Rings: Included for the listed application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 525cc high impedance fuel injectors for Nissan 240SX 14mm setups
- Saturated, high impedance ball and seat injector design
- Increased fuel delivery for modified S13 and S14 performance applications
- Excellent linearity for consistent fuel delivery across the operating range
- Strong short pulse width repeatability for precise injector control
- Superior short pulse width control helps provide excellent tunability and drivability
- Tight manufacturing tolerances help deliver consistent injector performance
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Injector set is flow matched to within 1 percent
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the listed application
- Includes PGTUSC4 solder-in wiring pigtails
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
240SX 14mm Setup and Installation
The Fuel Injector Clinic is182-0525h is specifically configured for Nissan 240SX applications using the 14mm injector setup. PGTUSC4 solder-in pigtails are included with the injector set for the required wiring connection.
Modified Nissan 240SX fuel systems can use different injector, O-ring, and fuel rail configurations. Fuel Injector Clinic also offers a separate 11mm version of its 525cc 240SX injector set, so if your S13 or S14 uses an aftermarket fuel rail or another non-standard fuel system configuration, contact Beefcake Racing before ordering to confirm that the is182-0525h 14mm setup is correct for your combination.
Fitment
- 1989 Nissan 240SX S13 - 14mm Setup
- 1990 Nissan 240SX S13 - 14mm Setup
- 1991 Nissan 240SX S13 - 14mm Setup
- 1992 Nissan 240SX S13 - 14mm Setup
- 1993 Nissan 240SX S13 - 14mm Setup
- 1994 Nissan 240SX S13 - 14mm Setup
- 1995 Nissan 240SX S14 - 14mm Setup
- 1996 Nissan 240SX S14 - 14mm Setup
- 1997 Nissan 240SX S14 - 14mm Setup
- 1998 Nissan 240SX S14 - 14mm Setup
FAQs
What does the 14mm setup mean for the Fuel Injector Clinic is182-0525h?
The is182-0525h is Fuel Injector Clinic's 525cc injector set specifically configured for Nissan 240SX applications using the 14mm injector setup. Fuel Injector Clinic offers the separate is181-0525h for the 11mm configuration, so verifying your injector and fuel rail setup is important if your S13 or S14 has an aftermarket or non-standard fuel system.
How are the Fuel Injector Clinic is182-0525h injectors matched and tested?
Fuel Injector Clinic precisely matches the set using its proprietary Data Match Technology, and the injectors are flow matched to within 1 percent. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for Nissan 240SX street, track, and high-performance builds. With both 11mm and 14mm injector configurations available for the S13 and S14, selecting the correct setup is important for building a properly matched fuel system. If you have questions about the Fuel Injector Clinic is182-0525h, your 14mm injector setup, or compatibility with an aftermarket fuel system, our performance specialists are ready to help. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
