Fuel Injector Clinic 775cc Fuel Injector Set for 240SX 11mm Setup - High Z (is181-0775h) - 1989-1998 Nissan 240SX S13 / S14
Upgrade the fuel system in your 1989-1998 Nissan 240SX with the Fuel Injector Clinic 775cc High-Z Fuel Injector Set for 11mm setups. Designed for S13 and S14 performance applications that need increased fuel delivery without sacrificing precise injector control, this set includes four 775cc saturated, high impedance ball and seat injectors. Excellent linearity and short pulse width repeatability help provide predictable fueling across the operating range, while tight manufacturing tolerances and precise matching give tuners the consistency needed to dial in a modified 240SX with excellent drivability.
Each injector is individually serial numbered and precisely matched using Fuel Injector Clinic's proprietary Data Match Technology, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. Fuel Injector Clinic supplies the injectors with the O-rings required for the listed application, and PGTUSC4 solder-in pigtails are included for the injector wiring connection. Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors, and every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is181-0775h
- Application: Nissan 240SX 11mm setup
- Injector Flow Rate: 775cc
- Injector Quantity: 4
- Injector Type: Saturated ball and seat
- Impedance: High-Z / high impedance
- Flow Matching: Precisely matched using Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Pigtails: PGTUSC4 solder-in pigtails
- O-Rings: Included for the listed application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Four 775cc high impedance fuel injectors for Nissan 240SX 11mm setups
- Saturated, high impedance ball and seat injector design
- Excellent linearity for consistent fuel delivery across the operating range
- Strong short pulse width repeatability for precise injector control
- Superior short pulse width control helps provide excellent tunability and drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow matched to within 1 percent
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the listed application
- Includes PGTUSC4 solder-in wiring pigtails
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
240SX 11mm Setup and Installation
The Fuel Injector Clinic is181-0775h is specifically configured for Nissan 240SX applications using the 11mm injector setup. PGTUSC4 solder-in pigtails are included with the injector set for the required wiring connection.
Modified 240SX fuel systems can use different injector, fuel rail, and O-ring configurations. If your S13 or S14 has an aftermarket fuel rail or another non-standard fuel system setup, contact Beefcake Racing before ordering to confirm that the is181-0775h is the correct injector configuration for your combination.
Fitment
- 1989 Nissan 240SX S13 - 11mm Setup
- 1990 Nissan 240SX S13 - 11mm Setup
- 1991 Nissan 240SX S13 - 11mm Setup
- 1992 Nissan 240SX S13 - 11mm Setup
- 1993 Nissan 240SX S13 - 11mm Setup
- 1994 Nissan 240SX S13 - 11mm Setup
- 1995 Nissan 240SX S14 - 11mm Setup
- 1996 Nissan 240SX S14 - 11mm Setup
- 1997 Nissan 240SX S14 - 11mm Setup
- 1998 Nissan 240SX S14 - 11mm Setup
FAQs
What does the 11mm setup mean for the Fuel Injector Clinic is181-0775h?
The is181-0775h is Fuel Injector Clinic's 775cc injector set specifically configured for Nissan 240SX applications using the 11mm injector setup. Because modified S13 and S14 fuel systems can use different injector and fuel rail configurations, verify your setup before ordering if the vehicle has an aftermarket or non-standard fuel system.
How are the Fuel Injector Clinic is181-0775h injectors matched and tested?
Fuel Injector Clinic precisely matches the injector set using its proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and performance fuel system components for Nissan 240SX street, track, and high-performance builds. With multiple injector configurations available for the S13 and S14 chassis, selecting the proper setup is critical to getting the combination right. If you have questions about the Fuel Injector Clinic is181-0775h, your 11mm injector setup, or compatibility with an aftermarket fuel system, our performance specialists are ready to help. Email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
