Fuel Injector Clinic 2150cc Fuel Injector Set - High Z (is177-2150h) - 2013-2020 Subaru BRZ
Give your high-horsepower 2013-2020 Subaru BRZ the serious fuel capacity it demands with the Fuel Injector Clinic is177-2150h 2150cc High-Z fuel injector set. This set of four saturated, high-impedance injectors combines massive 2150cc/min flow capability with the precise low-pulse-width control needed to maintain excellent response and drivability. Better yet, this application features drop-in plug fitment, eliminating the injector plug conversion required with many other high-flow injector combinations.
Because controlling an injector this large requires exceptional consistency, Fuel Injector Clinic uses its Data Match Technology dynamic flow matching during production of the is177-2150h set. This process significantly improves the ECU's ability to control the injectors in the sub-2ms pulse width range commonly encountered during idle and part-throttle operation. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is177-2150h
- Flow Rate: 2150cc/min
- Injector Quantity: 4
- Injector Type: Saturated / high impedance
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology dynamic flow matching
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Electrical Fitment: Drop-in plug fit
- O-Rings: Included as required for the listed factory application
- MTBE Fuel Compatibility: Not compatible with VP Import, Q16, or other MTBE-oxygenated fuels
- Alcohol-Based Fuel Note: Follow FIC care instructions when using E85 or other alcohol-based fuels, particularly during prolonged periods of disuse
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of four massive 2150cc/min performance fuel injectors
- High-Z saturated injector design
- Built for applications requiring extremely high fuel volume
- Excellent choice for E85 and other compatible high-volume fuels
- Drop-in plug fit for straightforward electrical installation
- Data Match Technology dynamic flow matching specifically supports precise control of these high-flow injectors
- Improved ECU control in the sub-2ms pulse width range typical of idle and part-throttle conditions
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F
- Tested using CF-16B calibration fluid
- Superior short pulse width control helps support easier tuning and strong drivability
- Supplied with O-rings required for the listed factory application
- Lifetime warranty against failure caused by defects in original manufacture
Massive Fuel Capacity With Precise Low-Pulse Control
Moving 2150cc/min of fuel is one thing. Controlling that much injector accurately at idle and part throttle is another. The is177-2150h is engineered to deliver both, making it a serious fueling solution for BRZ builds where smaller injectors simply cannot keep up with the engine's fuel demand.
Fuel Injector Clinic applies dynamic flow matching to these injectors because of their exceptionally high flow rate. The resulting consistency significantly improves the ECU's ability to control injector operation below 2ms pulse width, an operating range commonly encountered during idle and part-throttle driving. That gives high-output BRZ combinations massive fueling potential without ignoring the low-load control that determines how well a performance car actually drives.
Data Match Technology
Each is177-2150h injector is individually serial numbered, and its results are documented on the included Data Match Sheet. Fuel Injector Clinic provides detailed flow matching and latency information to give tuners the data needed to properly calibrate these extremely high-flow injectors.
FIC tests and rates the injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. Combined with dynamic matching and superior short pulse width control, this provides a well-documented injector package designed to make serious fuel delivery more manageable during calibration.
Important Fuel Compatibility Warning
DO NOT USE the is177-2150h with VP Import, Q16, or other MTBE-oxygenated fuels. The internal construction of the 2150cc/min injector incorporates a seal that can swell when exposed to MTBE. This swelling can cause a significant reduction in injector flow, making these injectors unsuitable for MTBE-oxygenated fuels.
The is177-2150h can be used with E85, but FIC's injector care instructions must be followed. Alcohol-based fuels can create potential corrosion concerns when injectors remain exposed to the fuel during prolonged periods of disuse. Proper fuel-system care is especially important for vehicles that are stored or driven infrequently.
Drop-In Plug Fit and Installation
Unlike FIC applications that require solder-in pigtails or optional electrical adapters, the is177-2150h features drop-in plug fitment for the listed BRZ application. This eliminates injector plug conversion and simplifies the electrical side of the installation.
Fuel Injector Clinic supplies the injectors with the O-rings required for the listed factory application. If your BRZ uses aftermarket fuel rails or another unusual fuel-system configuration, verify injector fitment before ordering to make sure the injectors are correctly configured for your setup.
Fitment
- 2013 Subaru BRZ
- 2014 Subaru BRZ
- 2015 Subaru BRZ
- 2016 Subaru BRZ
- 2017 Subaru BRZ
- 2018 Subaru BRZ
- 2019 Subaru BRZ
- 2020 Subaru BRZ
FAQs
Can Fuel Injector Clinic is177-2150h injectors be used with E85?
Yes. These 2150cc injectors are suitable for E85 and other compatible high-volume fuels, but FIC's care instructions should be followed because prolonged disuse while the injectors are exposed to alcohol-based fuel can create potential corrosion concerns. They must not be used with Q16, VP Import, or other MTBE-oxygenated fuels.
Does the is177-2150h injector set require pigtails or plug-and-play adapters?
No. Fuel Injector Clinic specifies drop-in plug fitment for this BRZ injector set, so the injector plug conversion required by some other FIC applications is not necessary.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and the supporting fuel-system components needed for serious Subaru performance builds. When your BRZ has reached the point where massive fuel delivery and precise injector control are both critical, our team can help you select the injector and supporting fuel-system components appropriate for your combination. Questions about Fuel Injector Clinic is177-2150h? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
