Fuel Injector Clinic 1200cc Fuel Injector Set - High Z (is177-1200h) - 2013-2020 Subaru BRZ
Feed your modified 2013-2020 Subaru BRZ with the fuel capacity it needs using the Fuel Injector Clinic is177-1200h 1200cc High-Z fuel injector set. Previously offered as the IS177-1100H, this current 1200cc set includes four high-impedance, saturated performance injectors designed for serious fuel demand while retaining the short pulse width control and drivability needed from a properly tuned street or performance BRZ. FIC specifically identifies these injectors as a strong choice for E85 applications.
Fuel Injector Clinic precisely matches the is177-1200h set using its proprietary Data Match Technology. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTJETR4Q solder-in pigtails are included, or optional PADPJtoD4 plug-and-play adapters can be used to avoid cutting and soldering the applicable factory wiring harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is177-1200h
- Previous Part Number: IS177-1100H
- Flow Rate: 1200cc/min
- Injector Quantity: 4
- Injector Type: Saturated / high impedance
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTJETR4Q
- Optional Plug-and-Play Adapters: PADPJtoD4
- O-Rings: Included as required for the listed factory application
- Fuel Application Highlight: Great for E85 applications
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of four 1200cc/min High-Z performance fuel injectors
- Current 1200cc replacement for the previous IS177-1100H injector set
- Designed to provide the additional fuel capacity required by high-performance BRZ builds
- Excellent choice for applications requiring increased fuel volume, including E85 builds
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered for identification and documentation
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F
- Tested using CF-16B calibration fluid
- Superior short pulse width control helps support accurate tuning and strong drivability
- PGTJETR4Q solder-in pigtails included
- Optional PADPJtoD4 plug-and-play adapters available
- Supplied with O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program components
- Lifetime warranty against failure caused by defects in original manufacture
Data Match Technology
High injector flow capacity is only useful when the ECU can control that fuel accurately. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors in the is177-1200h set, helping provide consistent fuel delivery across all four cylinders and giving the tuner a dependable foundation for calibration.
Each injector is individually serial numbered, and the matching results are documented on the included Data Match Sheet. Detailed flow matching and latency information gives tuners valuable injector-specific data for dialing in the fuel system instead of relying solely on a nominal injector flow rating.
1200cc Fueling for Performance and E85 Builds
The is177-1200h delivers substantial 1200cc/min fuel capacity for BRZ combinations that have outgrown smaller injectors. Fuel Injector Clinic specifically calls out this injector set as a great option for E85 applications, where increased fuel volume can place significantly greater demands on the fuel system.
High flow does not eliminate the need for control at lower engine loads. Superior short pulse width performance and precise injector matching help maintain controllable fuel delivery at idle and part throttle while providing the additional capacity required as engine load and fuel demand increase. With proper tuning and a correctly sized supporting fuel system, that balance makes the is177-1200h well suited to serious street and performance BRZ builds.
Wiring and Installation
The is177-1200h set includes PGTJETR4Q solder-in pigtails. Installation using these pigtails requires replacing the applicable injector connectors on the vehicle wiring harness and soldering the supplied pigtails into place. Optional PADPJtoD4 plug-and-play adapters provide an alternative that connects the injectors to the applicable factory harness without cutting or soldering.
Fuel Injector Clinic chooses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The set is supplied with the O-rings required for the listed factory application. BRZs equipped with aftermarket fuel rails or other non-standard fuel-system configurations should have injector fitment verified before ordering.
Fitment
- 2013 Subaru BRZ
- 2014 Subaru BRZ
- 2015 Subaru BRZ
- 2016 Subaru BRZ
- 2017 Subaru BRZ
- 2018 Subaru BRZ
- 2019 Subaru BRZ
- 2020 Subaru BRZ
FAQs
Is is177-1200h the replacement for the older IS177-1100H injector set?
Yes. Fuel Injector Clinic identifies the current is177-1200h 1200cc High-Z injector set as the replacement for the previous IS177-1100H offering.
What wiring components are included with the is177-1200h injectors?
The set includes PGTJETR4Q solder-in pigtails. Optional PADPJtoD4 plug-and-play adapters are available for owners who want to connect the injectors without cutting or soldering the applicable factory wiring harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and the supporting fuel-system components needed for serious Subaru performance builds. Whether your BRZ is being upgraded for more power, E85, or a combination of performance modifications, our team can help you select the injector size and supporting components appropriate for your setup. Questions about Fuel Injector Clinic is177-1200h? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
