Fuel Injector Clinic 850cc Fuel Injector Set - High Z (is177-0850h) - 2013-2020 Subaru BRZ
Upgrade the fuel system in your 2013-2020 Subaru BRZ with the Fuel Injector Clinic is177-0850h 850cc High-Z fuel injector set. This matched set of four saturated, high-impedance ball and seat injectors delivers the additional fuel capacity demanded by modified performance combinations while maintaining the linearity, short pulse width control, and drivability needed for a street-driven BRZ. FIC's Data Match Technology provides precise injector matching, giving your tuner consistent fuel delivery across all four cylinders.
Each injector is individually serial numbered and supplied with detailed flow matching and latency information on the included Data Match Sheet. Fuel Injector Clinic tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. The set includes PGTUSC4 solder-in pigtails, with optional PADPUtoD4 plug-and-play adapters available for owners who want to avoid cutting and soldering the applicable factory wiring harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is177-0850h
- Flow Rate: 850cc/min
- Injector Quantity: 4
- Injector Type: Saturated / high impedance ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoD4
- O-Rings: Included as required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of four 850cc/min performance fuel injectors
- Saturated, high-impedance ball and seat injector construction
- Excellent linearity and short pulse width repeatability
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F
- Tested using CF-16B calibration fluid
- Superior short pulse width control helps support accurate tuning and strong drivability
- PGTUSC4 solder-in pigtails included
- Optional PADPUtoD4 plug-and-play adapters available
- Supplied with O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program components
- Lifetime warranty against failure caused by defects in original manufacture
Data Match Technology
Injector flow capacity is only part of the equation when building a properly calibrated performance fuel system. Consistent operation from one injector to the next is critical, particularly when tuning a modified engine. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors in the is177-0850h set, providing the ECU and tuner with a consistent foundation for accurate fuel delivery.
Each injector is individually serial numbered, with its results documented on the included Data Match Sheet. This detailed matching and latency information helps tuners work with meaningful injector-specific data rather than relying solely on a nominal flow rating.
Performance Without Sacrificing Drivability
The is177-0850h combines increased 850cc/min fuel capacity with the short pulse width control needed for smooth operation at lower fuel demands. Tight injector control and precise matching help make these injectors easier to tune while supporting the drivability expected from a performance-oriented street car.
Fuel Injector Clinic tests and rates the injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. The result is a well-documented High-Z injector package built for BRZ owners who need additional fueling capability without giving up the control required during idle, part-throttle, and transitional operation.
Wiring and Installation
The is177-0850h set includes PGTUSC4 solder-in pigtails. Using the supplied pigtails requires replacing the applicable injector connectors on the vehicle wiring harness and soldering the new pigtails into place. Optional PADPUtoD4 plug-and-play adapters provide an alternative that allows connection to the applicable factory harness without cutting or soldering.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The injectors are supplied with the O-rings required for the listed factory application. Vehicles equipped with aftermarket fuel rails or other non-standard fuel-system configurations should be verified before ordering to ensure proper injector fitment.
Fitment
- 2013 Subaru BRZ
- 2014 Subaru BRZ
- 2015 Subaru BRZ
- 2016 Subaru BRZ
- 2017 Subaru BRZ
- 2018 Subaru BRZ
- 2019 Subaru BRZ
- 2020 Subaru BRZ
FAQs
What is included with the Fuel Injector Clinic is177-0850h injector set?
The set includes four matched 850cc High-Z ball and seat fuel injectors, the applicable O-rings, PGTUSC4 solder-in pigtails, and detailed injector matching information. Optional PADPUtoD4 plug-and-play adapters are available separately.
Do the is177-0850h injectors require wiring changes?
Yes, when installing them with the included PGTUSC4 pigtails, the applicable factory injector connectors must be replaced and the new pigtails soldered into the harness. Optional PADPUtoD4 plug-and-play adapters allow installation without cutting or soldering the applicable factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and the supporting fuel-system components needed for serious street and performance builds. Whether your BRZ is lightly modified or being built for substantially more power, our team can help you choose the injector size and supporting fuel-system components appropriate for your combination. Questions about Fuel Injector Clinic is177-0850h? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
