Fuel Injector Clinic 1440cc Fuel Injector Set - High Z (1999 - 2002 Volkswagen / Audi - 6 Cylinder - 53mm) IS168-1440H
Step up the fueling capability of your 1999-2002 Volkswagen or Audi six-cylinder performance build with the Fuel Injector Clinic 1440cc High-Z Fuel Injector Set. The IS168-1440H includes six 1440cc saturated/high impedance ball and seat injectors in a 53mm configuration, delivering serious fuel capacity without giving up the low-pulse-width control and drivability needed in a properly tuned street car. Positioned between FIC's 1200cc and 1650cc injectors, the 1440cc offers an excellent combination of high-flow capability, precise control, and broad fuel compatibility for demanding gasoline, E85, and race-fuel combinations.
Stainless alloy valve construction allows the FIC 1440cc injector to be used with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Every IS168-1440H set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency value information to support accurate ECU calibration. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS168-1440H
- Flow Rate: 1440cc/min
- Quantity: Set of 6 injectors
- Impedance: High-Z / High Impedance
- Injector Type: Saturated ball and seat
- Injector Length: 53mm
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet included
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring: PGTUSC6 solder-in pigtails
- Optional Wiring Adapters: PADPUtoJ6 plug-and-play adapters
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1440cc saturated/high impedance ball and seat fuel injectors
- 53mm injector configuration for the listed Volkswagen and Audi six-cylinder applications
- High-flow capability for demanding higher-horsepower performance combinations
- Excellent idle performance in properly tuned street-driven vehicles
- Superior short pulse width control supports precise tuning and excellent drivability
- Fills the performance range between FIC's 1200cc and 1650cc high impedance injectors
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline and E85
- Compatible with Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered for identification and matching
- Includes a detailed Data Match Sheet with flow matching and latency value information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the listed factory application
- Includes PGTUSC6 pigtails for injector plug conversion
- Optional PADPUtoJ6 plug-and-play adapters allow installation without cutting or soldering the factory wiring harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
The IS168-1440H injector set requires an injector plug conversion when installed with the factory wiring harness. Fuel Injector Clinic includes PGTUSC6 pigtails that can be soldered into the vehicle harness to replace the existing injector plugs. For an installation without cutting or soldering the factory harness, optional PADPUtoJ6 plug-and-play adapters can be added to connect the injectors to the existing wiring.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The IS168-1440H set includes the O-rings required for the listed factory application. If your vehicle uses an aftermarket fuel rail or another non-standard fuel system configuration, injector compatibility should be verified before ordering.
Fitment
- 1999 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
- 2000 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
- 2001 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
- 2002 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
FAQs
What fuels are compatible with FIC IS168-1440H 1440cc injectors?
Fuel Injector Clinic's 1440cc high impedance injector uses stainless alloy valve construction and is compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. This broad compatibility makes the IS168-1440H suitable for a wide range of properly configured street and high-performance fuel systems.
Does the FIC IS168-1440H injector set require wiring modifications?
Yes. The set includes PGTUSC6 pigtails that can be soldered into the vehicle wiring harness. Optional PADPUtoJ6 plug-and-play adapters are available for an installation that does not require cutting or soldering the factory injector wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
When your Volkswagen or Audi build needs the fuel capacity of 1440cc injectors, matching the injectors with the right supporting fuel system components is critical. Beefcake Racing can help you put together the right combination for your performance goals, from Fuel Injector Clinic injectors and wiring adapters to the supporting components your build requires. Have questions about IS168-1440H, fuel compatibility, wiring adapters, or injector fitment? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
