Fuel Injector Clinic 1200cc (Previously 1100cc) Fuel Injector Set - High Z (1999 - 2002 Volkswagen / Audi - 6 Cylinder - 53mm) IS168-1200H
Step up the fueling capability of your 1999-2002 Volkswagen or Audi six-cylinder performance build with the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. The IS168-1200H includes six 1200cc saturated/high impedance ball and seat injectors in a 53mm configuration, combining substantial fuel-flow capability with the short pulse width control and precise matching needed for excellent drivability and predictable tuning. This set also provides a plug-and-play fit to the OEM injector harness, eliminating the injector plug conversion required with several other flow rates in this application family.
Previously sold under part number IS168-1100H, the current IS168-1200H set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency value information to support accurate ECU calibration. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. The injectors include the O-rings required for the listed factory application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS168-1200H
- Previous Part Number: IS168-1100H
- Flow Rate: 1200cc/min
- Quantity: Set of 6 injectors
- Impedance: High-Z / High Impedance
- Injector Type: Saturated ball and seat
- Injector Length: 53mm
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet included
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Wiring: Plug-and-play fit to OEM harness
- Resistor Pack: Removal recommended
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1200cc saturated/high impedance ball and seat fuel injectors
- 53mm injector configuration for the listed Volkswagen and Audi six-cylinder applications
- Increased fuel-flow capability for modified and higher-performance combinations
- Superior short pulse width control supports accurate tuning and excellent drivability
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered for identification and matching
- Includes a detailed Data Match Sheet with flow matching and latency value information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Plug-and-play fit to the OEM injector harness
- No injector plug replacement required for the listed factory application
- Resistor pack removal recommended by Fuel Injector Clinic
- Includes the O-rings required for the listed factory application
- Previously sold under Fuel Injector Clinic part number IS168-1100H
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Plug-and-Play Installation
The IS168-1200H is designed for a plug-and-play fit to the OEM injector harness, so an injector plug conversion is not required for the listed factory application. This simplifies installation compared with IS168 injector sizes that require pigtails or wiring adapters. Fuel Injector Clinic recommends resistor pack removal when installing this injector set.
Fuel Injector Clinic supplies the IS168-1200H injectors with the O-rings required for the listed factory application. If your vehicle uses an aftermarket fuel rail or another non-standard fuel system configuration, injector compatibility should be verified before ordering.
Fitment
- 1999 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
- 2000 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
- 2001 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
- 2002 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
FAQs
Is IS168-1200H the replacement for the older IS168-1100H injector set?
Yes. Fuel Injector Clinic identifies IS168-1200H as the current 1200cc injector set that was previously sold as IS168-1100H. The current set includes six 1200cc saturated/high impedance ball and seat injectors for the listed 53mm Volkswagen and Audi six-cylinder applications.
Does the FIC IS168-1200H injector set require wiring modifications?
No. Fuel Injector Clinic specifies IS168-1200H as a plug-and-play fit to the OEM injector harness, so injector plug replacement is not required for the listed factory application. Fuel Injector Clinic does recommend resistor pack removal with this injector set.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
When your Volkswagen or Audi build needs the additional fueling capability of 1200cc injectors, getting the complete fuel system combination right is critical. Beefcake Racing can help you match your Fuel Injector Clinic injectors with the supporting fuel system and performance components your build requires. Have questions about IS168-1200H, the previous IS168-1100H part number, resistor pack removal, or injector fitment? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
