Fuel Injector Clinic 445cc Fuel Injector Set - High Z (1999 - 2002 Volkswagen / Audi - 6 Cylinder - 53mm) IS168-0445H
Upgrade your 1999-2002 Volkswagen or Audi six-cylinder fuel system with the Fuel Injector Clinic 445cc High-Z Fuel Injector Set. Designed for applications requiring a 53mm injector, the IS168-0445H includes six saturated/high impedance ball and seat injectors engineered for excellent linearity, consistent short pulse width operation, and dependable drivability. Tight manufacturing tolerances and precise flow matching provide the consistency tuners need for accurate calibration, making this set a strong choice for performance applications that require greater fueling capability with predictable injector control.
Fuel Injector Clinic precisely flow matches each IS168-0445H injector set to within 1 percent. Every injector is individually numbered, with individual results documented on the detailed flow sheet supplied with the set. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. The injectors are supplied with the O-rings required for the listed factory application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS168-0445H
- Flow Rate: 445cc
- Quantity: Set of 6 injectors
- Impedance: High-Z / High Impedance
- Injector Type: Saturated ball and seat
- Injector Length: 53mm
- Flow Matching: Precisely flow matched to within 1 percent
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring: PGTUSC6 solder-in pigtails
- Optional Wiring Adapters: PADPUtoJ6 plug-and-play adapters
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 445cc saturated/high impedance ball and seat fuel injectors
- 53mm injector configuration for the listed Volkswagen and Audi six-cylinder applications
- Excellent linearity and short pulse width repeatability for consistent fuel delivery
- Superior short pulse width control supports accurate tuning and excellent drivability
- Tight manufacturing tolerances help provide predictable injector performance
- Precisely flow matched to within 1 percent
- Each injector is individually numbered for identification within the matched set
- Detailed flow sheet includes individual injector test results
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the listed factory application
- Includes PGTUSC6 pigtails for injector plug conversion
- Optional PADPUtoJ6 plug-and-play adapters allow installation without cutting or soldering the factory wiring harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
The IS168-0445H injector set requires an injector plug conversion when installed with the factory wiring harness. Fuel Injector Clinic includes PGTUSC6 pigtails that can be soldered into the vehicle harness to replace the existing injector plugs. For an installation without cutting or soldering the factory harness, optional PADPUtoJ6 plug-and-play adapters can be added to connect the injectors to the existing wiring.
Fuel Injector Clinic chooses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The set is supplied with the O-rings required for the listed factory application. If your vehicle uses an aftermarket fuel rail or another non-standard fuel system configuration, injector compatibility should be verified before ordering.
Fitment
- 1999 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
- 2000 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
- 2001 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
- 2002 Volkswagen / Audi 6-cylinder applications requiring 53mm injectors
FAQs
How are the Fuel Injector Clinic IS168-0445H injectors matched and tested?
Fuel Injector Clinic precisely flow matches each set to within 1 percent. Every injector is individually numbered, and its results are documented on the detailed flow sheet included with the set. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Does the FIC IS168-0445H injector set require wiring modifications?
Yes. The set includes PGTUSC6 pigtails that can be soldered into the vehicle wiring harness. Optional PADPUtoJ6 plug-and-play adapters are available for an installation that does not require cutting or soldering the factory injector wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for proven Fuel Injector Clinic fuel system upgrades and the supporting components needed for a properly matched performance combination. Whether your Volkswagen or Audi is a street-driven performance car or part of a more extensively modified build, our team can help you select the right injectors and supporting fuel system components. Have questions about IS168-0445H, wiring adapters, or injector compatibility? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
