Fuel Injector Clinic 1000cc Fuel Injector Set - High Z (is167-1000h) - 1997-2006 Volkswagen / Audi 4 Cylinder 53mm
Give your performance Volkswagen or Audi four-cylinder the fuel capacity and precise injector control it needs with the Fuel Injector Clinic 1000cc High-Z Fuel Injector Set. The is167-1000h includes four 1000cc saturated, high-impedance ball-and-seat injectors in a 53mm configuration. Designed for modified VW and Audi applications that demand substantially more fuel than stock, these injectors combine serious flow capability with excellent short pulse width control and FIC's precise matching process for predictable tuning and strong drivability.
Fuel Injector Clinic precisely matches the is167-1000h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. The set includes PGTUSC4 solder-in pigtails, while optional PADPUtoJ4 plug-and-play adapters allow installation without cutting or soldering the factory injector wiring. FIC supplies the O-rings required for the listed factory application and backs every injector against failure caused by defects in original manufacture with a lifetime warranty.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is167-1000h
- Flow Rate: 1000cc/min
- Application: Volkswagen / Audi 4-cylinder
- Injector Height: 53mm
- Injector Type: Saturated / High Impedance / High-Z
- Injector Design: Ball and seat
- Quantity: Set of 4 injectors
- Flow Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Injector Identification: Individually serial numbered
- Included Data: Data Match Sheet with flow matching and latency information
- Included Wiring: PGTUSC4 solder-in pigtails
- Optional Wiring: PADPUtoJ4 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 1000cc/min flow capacity for high-performance VW and Audi four-cylinder applications
- 53mm injector configuration
- Complete set of four injectors
- Saturated, high-impedance design
- Ball-and-seat injector construction
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Superior short pulse width control supports accurate tuning and strong drivability
- Each injector is individually serial numbered for identification and data tracking
- Detailed Data Match Sheet provides flow matching and latency information for calibration
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoJ4 plug-and-play adapters eliminate the need to cut or solder the factory injector wiring
- Includes O-rings required for the listed factory application
- Uses brand-new injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
1000cc Fuel Capacity with Data Matched Precision
High-flow injectors need more than raw capacity to deliver a well-mannered performance combination. Fuel Injector Clinic uses Data Match Technology to precisely match the injectors in the is167-1000h set, while superior short pulse width control helps provide predictable fuel delivery during idle and part-throttle operation. Each injector is individually serial numbered and accompanied by detailed flow matching and latency information, giving tuners the data and consistency needed to accurately calibrate a modified VW or Audi four-cylinder.
Wiring Options
The is167-1000h injector set requires an injector plug conversion. PGTUSC4 pigtails are included and can be soldered into the vehicle wiring harness to replace the existing injector plugs. For a cleaner installation without cutting or soldering the factory harness, optional PADPUtoJ4 plug-and-play adapters connect the injectors to the existing wiring.
Fitment
- 1997 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 1998 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 1999 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2000 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2001 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2002 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2003 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2004 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2005 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2006 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
Fitment Note: This is the 53mm four-cylinder VW/Audi injector configuration. Verify that your specific application requires a 53mm injector before ordering. If your vehicle uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing to confirm proper fitment.
FAQs
What makes the is167-1000h different from other VW/Audi 1000cc injector sets?
The is167-1000h is specifically the four-cylinder 53mm configuration. Fuel Injector Clinic also offers injector sets with different heights and cylinder counts, so confirming the 53mm configuration for your application is important before ordering.
Does the is167-1000h require an injector wiring change?
Yes. PGTUSC4 solder-in pigtails are included with the set. Optional PADPUtoJ4 plug-and-play adapters can be selected instead when you want to connect the injectors without cutting or soldering the factory injector harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you select the correct Fuel Injector Clinic injectors and supporting fuel-system components for your Volkswagen or Audi performance build. If you have questions about the is167-1000h, injector sizing, the 53mm configuration, wiring adapters, or fuel-system compatibility, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
