Fuel Injector Clinic 365cc Fuel Injector Set - High Z (is167-0365h) - 1997-2006 Volkswagen / Audi 4 Cylinder 53mm
Upgrade your Volkswagen or Audi four-cylinder fuel system with the precision and consistency of the Fuel Injector Clinic 365cc High-Z Fuel Injector Set. The is167-0365h includes four 365cc saturated, high-impedance ball-and-seat injectors in a 53mm configuration. Designed for performance applications that demand accurate fuel delivery, these injectors combine excellent linearity and short pulse width repeatability with tight manufacturing tolerances for predictable tuning and strong drivability.
Fuel Injector Clinic precisely flow matches each is167-0365h injector set to within 1%. Every injector is individually numbered, and a detailed flow sheet showing the results for each injector is included with the set. FIC flow tests and rates these injectors at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. PGTUSC4 solder-in pigtails are included, while optional PADPUtoJ4 plug-and-play adapters allow installation without cutting or soldering the factory injector wiring. The injectors include the O-rings required for the listed factory application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is167-0365h
- Flow Rate: 365cc/min
- Application: Volkswagen / Audi 4-cylinder
- Injector Height: 53mm
- Injector Type: Saturated / High Impedance / High-Z
- Injector Design: Ball and seat
- Quantity: Set of 4 injectors
- Flow Matching: Precisely flow matched to within 1%
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Injector Identification: Individually numbered
- Included Data: Detailed flow sheet with individual injector results
- Included Wiring: PGTUSC4 solder-in pigtails
- Optional Wiring: PADPUtoJ4 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 365cc/min flow capacity for Volkswagen and Audi four-cylinder performance applications
- 53mm injector configuration
- Complete matched set of four injectors
- Saturated, high-impedance ball-and-seat injector design
- Injector sets precisely flow matched to within 1%
- Excellent linearity and short pulse width repeatability
- Superior short pulse width control supports accurate tuning and excellent drivability
- Tight manufacturing tolerances promote consistent injector performance
- Each injector is individually numbered
- Detailed flow sheet provides results for every injector in the set
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoJ4 plug-and-play adapters eliminate the need to cut or solder the factory injector wiring
- Includes O-rings required for the listed factory application
- Uses brand-new injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Precision Flow Matching for Consistent Performance
Injector performance is about more than flow capacity. Consistency between injectors is critical for accurate fuel delivery and a clean calibration. Fuel Injector Clinic precisely matches each is167-0365h set to within 1%, with every injector individually numbered and its results documented on the included flow sheet. Combined with excellent linearity, superior short pulse width control, and tight manufacturing tolerances, this gives tuners a consistent foundation for dialing in a responsive VW or Audi performance combination.
Wiring Options
The is167-0365h requires an injector plug conversion. PGTUSC4 pigtails are included and can be soldered into the vehicle wiring harness to replace the existing injector plugs. For an installation without cutting or soldering the factory harness, optional PADPUtoJ4 plug-and-play adapters connect the injectors to the existing wiring. Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors.
Fitment
- 1997 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 1998 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 1999 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2000 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2001 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2002 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2003 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2004 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2005 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
- 2006 Volkswagen / Audi 4-cylinder applications requiring 53mm injectors
Fitment Note: This is the 53mm four-cylinder VW/Audi injector configuration. Verify that your specific application requires 53mm injectors before ordering. If the vehicle uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing to confirm proper injector fitment.
FAQs
How are the Fuel Injector Clinic is167-0365h injectors matched?
Fuel Injector Clinic precisely flow matches each injector set to within 1%. Every injector is individually numbered, and a detailed flow sheet showing the results for each injector is included with the set.
Does the is167-0365h require an injector plug conversion?
Yes. PGTUSC4 solder-in pigtails are included for replacing the existing injector plugs. Optional PADPUtoJ4 plug-and-play adapters can be used instead when you want to connect the injectors without cutting or soldering the factory injector wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you select the correct Fuel Injector Clinic injectors and supporting fuel-system components for your Volkswagen or Audi performance build. If you have questions about the is167-0365h, injector sizing, the 53mm configuration, wiring adapters, or fuel-system compatibility, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
