Fuel Injector Clinic 1440cc Fuel Injector Set - High Z (1993 - 1998 Volkswagen / Audi - 6 Cylinder - 64mm) IS166-1440H
Step up the fueling capability of your 1993-1998 Volkswagen or Audi six-cylinder performance build with the Fuel Injector Clinic 1440cc High-Z Fuel Injector Set. Designed for applications requiring a 64mm injector, the IS166-1440H set combines serious fuel delivery capability with the linearity, short pulse width control, and drivability FIC engineered into its modern high impedance injectors. With six 1440cc saturated/high impedance ball and seat injectors, this set is an excellent choice for higher-horsepower combinations running gasoline, E85, or compatible race fuels while retaining excellent idle performance in street-driven vehicles.
Fuel Injector Clinic's 1440cc injector fills the performance range between its 1200cc and 1650cc offerings. Stainless alloy valve construction allows the injector to be used with a wide range of fuels, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Every IS166-1440H set is precisely matched using FIC's proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS166-1440H
- Flow Rate: 1440cc/min
- Quantity: Set of 6 injectors
- Impedance: High-Z / High Impedance
- Injector Type: Saturated ball and seat
- Injector Length: 64mm
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Injector Matching: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet included
- Included Wiring: PGTUSC6 solder-in pigtails
- Optional Wiring Adapters: PADPUtoJ6 plug-and-play adapters
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1440cc saturated/high impedance ball and seat fuel injectors
- 64mm configuration for the listed Volkswagen and Audi six-cylinder applications
- High fuel-flow capability designed to support higher-horsepower performance combinations
- Excellent idle performance for properly tuned street-driven applications
- Superior short pulse width control helps deliver excellent drivability and predictable tuning
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline and E85
- Compatible with Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes the O-rings required for the listed factory application
- Includes PGTUSC6 pigtails for injector plug conversion
- Optional PADPUtoJ6 plug-and-play adapters allow installation without cutting or soldering the factory wiring harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
The IS166-1440H injector set requires an injector plug conversion when installed with the factory wiring harness. Fuel Injector Clinic includes PGTUSC6 pigtails that can be soldered into the vehicle harness to replace the existing injector plugs. For an installation without cutting or soldering the factory harness, optional PADPUtoJ6 plug-and-play adapters can be added to connect the injectors to the existing wiring.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The IS166-1440H set is supplied with the O-rings required for the listed factory application. Vehicles using aftermarket fuel rails or other non-standard fuel system configurations should have injector compatibility verified before ordering.
Fitment
- 1993 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1994 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1995 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1996 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1997 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1998 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
FAQs
What fuels are compatible with FIC IS166-1440H 1440cc injectors?
The stainless alloy valve construction provides broad fuel compatibility. Fuel Injector Clinic specifies these 1440cc injectors for use with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. This makes them a versatile option for street and higher-horsepower performance combinations using a variety of fuels.
Does the Fuel Injector Clinic IS166-1440H set require wiring modifications?
Yes. The set includes PGTUSC6 pigtails that can be soldered into the vehicle wiring harness. Optional PADPUtoJ6 plug-and-play adapters are available for an installation that does not require cutting or soldering the factory injector wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for proven Fuel Injector Clinic fuel system upgrades and the supporting components needed for serious performance builds. Whether your Volkswagen or Audi is a street-driven performance car or a higher-horsepower combination requiring substantially more fuel capacity, our team can help you choose the right injectors and supporting fuel system components. Have questions about IS166-1440H, fuel compatibility, wiring adapters, or injector compatibility? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
