Fuel Injector Clinic 1000cc Fuel Injector Set - High Z (is166-1000h) - 1993-1998 Volkswagen / Audi 6 Cylinder 64mm
Upgrade the fuel system in your performance Volkswagen or Audi with the Fuel Injector Clinic 1000cc High-Z Fuel Injector Set. Designed for compatible 1993-1998 VW/Audi six-cylinder applications using the 64mm injector configuration, the is166-1000h includes six 1000cc saturated, high-impedance ball-and-seat injectors. This combination of increased fuel capacity, precise injector matching, and excellent short pulse width control gives performance builds the consistent fuel delivery needed for accurate tuning without sacrificing street drivability.
Every is166-1000h set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for the set. FIC flow tests and rates these injectors at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. PGTUSC6 solder-in pigtails are included, while optional PADPUtoJ6 plug-and-play adapters provide a convenient connection without cutting or soldering the vehicle's injector wiring.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is166-1000h
- Flow Rate: 1000cc/min
- Application: Volkswagen / Audi 6-cylinder
- Injector Height: 64mm
- Injector Type: Saturated / High Impedance / High-Z
- Injector Design: Ball and seat
- Quantity: Set of 6 injectors
- Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Injector Identification: Individually serial numbered
- Included Data: Data Match Sheet with flow matching and latency information
- Included Wiring: PGTUSC6 solder-in pigtails
- Optional Wiring: PADPUtoJ6 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 1000cc/min flow capacity for performance Volkswagen and Audi six-cylinder builds
- 64mm injector configuration
- Complete matched set of six high-impedance injectors
- Saturated, high-impedance ball-and-seat injector design
- Fuel Injector Clinic Data Match Technology for precise injector matching
- Each injector is individually serial numbered for traceability
- Included Data Match Sheet provides detailed flow matching and latency information
- Superior short pulse width control supports accurate tuning and excellent drivability
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 solder-in pigtails
- Optional PADPUtoJ6 plug-and-play adapters eliminate the need for cutting or soldering the injector wiring
- Includes O-rings required for the listed factory application
- Fuel Injector Clinic uses brand-new injectors rather than remanufactured or core-program injectors
- Lifetime warranty against failure caused by defects in original manufacture
Data Matched for Consistent Performance
Increasing injector flow is only part of building a fuel system that performs well across the entire operating range. Consistency between cylinders and predictable injector behavior at short pulse widths are equally important. Fuel Injector Clinic's Data Match Technology precisely characterizes each injector in the is166-1000h set, providing the detailed flow and latency information a tuner needs to achieve accurate fuel control. The result is dependable performance at idle and part throttle while supplying the additional fuel capacity required as engine load increases.
Wiring Options
The is166-1000h requires an injector plug conversion. PGTUSC6 pigtails are included and can be soldered into the vehicle wiring harness to replace the existing injector plugs. Optional PADPUtoJ6 plug-and-play adapters connect the injectors to the existing harness without cutting or soldering. Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors.
Fitment
- 1993 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1994 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1995 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1996 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1997 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1998 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
Fitment Note: This injector set is intended for compatible 1993-1998 Volkswagen and Audi six-cylinder applications using the 64mm injector configuration. If your vehicle uses an aftermarket fuel rail or another non-standard fuel-system setup, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
How are the Fuel Injector Clinic is166-1000h injectors matched?
Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injector set. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration.
Does the is166-1000h require an injector plug conversion?
Yes. PGTUSC6 solder-in pigtails are included for replacing the existing injector plugs. Optional PADPUtoJ6 plug-and-play adapters can be used instead, allowing the injectors to connect to the existing harness without cutting or soldering.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you select the correct Fuel Injector Clinic injectors and supporting fuel-system components for your Volkswagen or Audi performance build. If you have questions about the is166-1000h, injector sizing, the 64mm configuration, wiring adapters, or fuel-system compatibility, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
