Fuel Injector Clinic 775cc Fuel Injector Set - High Z (1993 - 1998 Volkswagen / Audi - 6 Cylinder - 64mm) IS166-0775H
Give your 1993-1998 Volkswagen or Audi six-cylinder performance build the precise fuel delivery it needs with the Fuel Injector Clinic 775cc High-Z Injector Set. Designed for 64mm applications, this complete six-injector set uses saturated/high impedance ball and seat injectors engineered for excellent linearity, consistent short pulse width operation, and dependable drivability. Whether you are upgrading the fuel system to support additional performance or simply want injectors built with tuning accuracy in mind, FIC combines modern injector technology with precise flow matching to deliver predictable fuel control.
Every set is matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information to help give tuners the data needed for accurate calibration. FIC tests and rates these injectors at 43.5 PSI (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. The injectors are supplied with the O-rings required for the listed factory application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS166-0775H
- Injector Flow Rate: 775cc
- Quantity: Set of 6 injectors
- Impedance: High-Z / High Impedance
- Injector Type: Saturated ball and seat
- Injector Length: 64mm
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Matching: Fuel Injector Clinic Data Match Technology
- Included Wiring: PGTUSC6 solder-in pigtails
- Optional Wiring Adapter: PADPUtoJ6 plug-and-play adapters
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 775cc saturated/high impedance fuel injectors for Volkswagen and Audi six-cylinder applications
- 64mm injector configuration for the listed factory application
- Excellent linearity and short pulse width repeatability for predictable fuel delivery
- Precisely matched using Fuel Injector Clinic's proprietary Data Match Technology
- Each injector is individually serial numbered for set identification and matching
- Includes a detailed Data Match Sheet with flow matching and latency value information
- Flow tested and rated at 43.5 PSI (3 Bar) and 90 degrees F using CF-16B calibration fluid
- Superior short pulse width control helps simplify tuning and maintain strong drivability
- Includes the required O-rings for the listed factory application
- Includes PGTUSC6 pigtails for wiring harness conversion
- Optional PADPUtoJ6 plug-and-play adapters eliminate the need to cut and solder the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring and Installation
This injector set requires an injector plug conversion when used with the factory wiring harness. Fuel Injector Clinic includes PGTUSC6 pigtails, which can be soldered into the vehicle harness in place of the existing injector plugs. For an installation that does not require cutting or soldering the factory harness, optional PADPUtoJ6 plug-and-play adapters can be added to connect the injectors to the existing harness.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The injectors are configured with the O-rings required for the listed factory application. If the vehicle uses an aftermarket fuel rail, intake, or another non-standard fuel system configuration, verify injector compatibility before ordering.
Fitment
- 1993 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1994 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1995 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1996 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1997 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
- 1998 Volkswagen / Audi 6-cylinder applications requiring 64mm injectors
FAQs
Do Fuel Injector Clinic IS166-0775H injectors require wiring modifications?
Yes. The set includes PGTUSC6 pigtails that can be soldered into the vehicle's wiring harness. Optional PADPUtoJ6 plug-and-play adapters are available for customers who want to connect the injectors without cutting or soldering the factory harness.
How are the Fuel Injector Clinic 775cc injectors matched and tested?
Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injector set. Each injector is individually serial numbered and accompanied by a Data Match Sheet containing flow matching and latency information. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for proven performance fuel system upgrades from Fuel Injector Clinic. Whether you are building a street-driven Volkswagen or Audi or putting together a higher-performance combination, our team can help you select the right injectors and supporting components for your setup. Questions about IS166-0775H, wiring adapters, or injector fitment? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
