Fuel Injector Clinic 1440cc Fuel Injector Set - High Z (is165-1440h) - 1988-1998 Volkswagen / Audi 4 Cylinder 64mm
Step up the fueling capability of your performance Volkswagen or Audi with the Fuel Injector Clinic 1440cc High-Z Fuel Injector Set. Designed for compatible 1988-1998 VW/Audi four-cylinder applications using the 64mm injector configuration, the is165-1440h includes four 1440cc saturated, high-impedance ball-and-seat injectors. This high-flow set delivers the fuel capacity demanded by serious performance combinations while retaining the excellent idle performance, short pulse width control, and drivability needed in a street-driven car.
Fuel Injector Clinic's 1440cc injector uses stainless alloy valve construction for broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each is165-1440h set is precisely matched using FIC's proprietary Data Match Technology, with individually serial numbered injectors and an included Data Match Sheet containing detailed flow matching and latency information. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. PGTUSC4 solder-in pigtails are included, while optional PADPUtoJ4 plug-and-play adapters provide a no-cut, no-solder wiring option.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is165-1440h
- Flow Rate: 1440cc/min
- Application: Volkswagen / Audi 4-cylinder
- Injector Height: 64mm
- Injector Type: Saturated / High Impedance / High-Z
- Injector Design: Ball and seat
- Valve Construction: Stainless alloy
- Quantity: Set of 4 injectors
- Flow Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Injector Identification: Individually serial numbered
- Included Data: Data Match Sheet with flow matching and latency information
- Included Wiring: PGTUSC4 solder-in pigtails
- Optional Wiring: PADPUtoJ4 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 1440cc/min flow capacity for high-performance Volkswagen and Audi four-cylinder builds
- 64mm injector configuration
- Complete matched set of four high-impedance injectors
- Saturated, high-impedance ball-and-seat injector design
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Excellent idle performance for street-driven performance vehicles
- Superior short pulse width control supports accurate tuning and strong drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC4 solder-in pigtails
- Optional PADPUtoJ4 plug-and-play adapters eliminate the need to cut or solder the factory injector wiring
- Includes O-rings required for the listed factory application
- Uses brand-new injectors rather than remanufactured or core-program injectors
- Lifetime warranty against failure caused by defects in original manufacture
High-Flow Performance Without Sacrificing Drivability
The 1440cc injector fills the performance range between FIC's 1200cc and 1650cc offerings, making it an excellent choice when a build needs substantial fuel capacity without giving up the control required for street use. Its combination of high-impedance operation, excellent idle characteristics, short pulse width control, and Data Match Technology gives tuners a strong foundation for accurately controlling fuel delivery from idle and part throttle through high-load operation.
Broad Fuel Compatibility
The stainless alloy valve construction of the 1440cc injector allows it to be used with a wide range of fuels. Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels, making the is165-1440h a versatile choice for street, race, and alternative-fuel performance combinations.
Wiring Options
The is165-1440h requires an injector plug conversion. PGTUSC4 pigtails are included and can be soldered into the vehicle wiring harness to replace the existing injector plugs. Optional PADPUtoJ4 plug-and-play adapters provide an alternative that connects the injectors to the existing harness without cutting or soldering. Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors.
Fitment
- 1988 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
- 1989 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
- 1990 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
- 1991 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
- 1992 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
- 1993 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
- 1994 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
- 1995 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
- 1996 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
- 1997 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
- 1998 Volkswagen / Audi 4-cylinder applications requiring 64mm injectors
Fitment Note: This injector set is intended for compatible 1988-1998 Volkswagen and Audi four-cylinder applications using the 64mm injector configuration. If your vehicle uses an aftermarket fuel rail or another non-standard fuel-system setup, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
What fuels are compatible with the Fuel Injector Clinic is165-1440h?
Fuel Injector Clinic specifies the 1440cc injector as compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Its stainless alloy valve construction provides the broad fuel compatibility needed for a variety of performance applications.
Does the is165-1440h require an injector plug conversion?
Yes. PGTUSC4 solder-in pigtails are included for replacing the existing injector plugs. Optional PADPUtoJ4 plug-and-play adapters can be used instead to connect the injectors without cutting or soldering the factory injector wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you select the correct Fuel Injector Clinic injectors and supporting fuel-system components for your Volkswagen or Audi performance build. If you have questions about the is165-1440h, injector sizing, the 64mm configuration, fuel compatibility, wiring adapters, or fuel-system requirements, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
