Fuel Injector Clinic 2150cc High-Z Fuel Injector Set (is158-2150h) - 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
When your 2008-2010 Dodge Viper ZB2 or 2013-2017 Viper VX1 needs serious fuel capacity, the Fuel Injector Clinic 2150cc High-Z Fuel Injector Set delivers the flow and precision required for high-output V10 performance. This complete set includes ten 2150cc saturated, high-impedance ball and seat injectors engineered for excellent linearity and short pulse width repeatability. The result is massive fueling capability paired with the precise injector control needed for accurate tuning and strong drivability throughout the operating range.
Fuel Injector Clinic precisely matches each set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency results supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. The set includes the O-rings required for the listed factory applications along with PGTDEN10 solder-in pigtails for the required injector plug conversion. Optional PADPDtoU10 plug-and-play adapters provide an alternative for owners who want to complete the installation without cutting or soldering the factory wiring harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is158-2150h
- Flow Rating: 2150cc
- Injector Quantity: Set of 10
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball and seat
- Application: 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
- Matching: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Option: PGTDEN10 solder-in pigtails
- Optional Wiring Adapter: PADPDtoU10 plug-and-play adapters
- O-Rings: Includes O-rings required for the listed factory applications
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of ten 2150cc fuel injectors for supported Dodge Viper V10 applications
- Designed for 2008-2010 Dodge Viper ZB2 and 2013-2017 Viper VX1 applications
- Massive 2150cc flow capacity for high-output performance builds
- Saturated, high-impedance ball and seat injector design
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector control
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Superior short pulse width control helps provide excellent tunability and drivability
- Flow tested and rated at 43.5 psi (3 Bar)
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes PGTDEN10 solder-in pigtails for the required injector plug conversion
- Optional PADPDtoU10 plug-and-play adapters eliminate the need to cut or solder the factory wiring harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Includes the O-rings required for the listed factory applications
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Massive Fuel Capacity with Precise Control
A 2150cc injector brings serious fuel delivery capability to a high-output Viper, but maximum flow alone does not make an injector easy to tune. Fuel Injector Clinic combines this substantial capacity with excellent linearity and short pulse width repeatability, helping the ECU accurately control fuel delivery even when injector pulse widths are small. For powerful V10 combinations, that balance between high-flow capability and precise control helps deliver the performance needed under load without overlooking idle and part-throttle drivability.
Data Match Technology for V10 Consistency
Keeping fuel delivery consistent across ten cylinders makes precise injector matching especially important on the Dodge Viper. Fuel Injector Clinic uses its proprietary Data Match Technology to match the is158-2150h injectors as a complete set. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information. This gives your tuner valuable injector-specific data for accurate ECU calibration and consistent fuel delivery across the V10.
Injector Plug Conversion Options
The is158-2150h injectors require a change from the factory injector plug on the Viper's wiring harness. PGTDEN10 solder-in pigtails are included with the injector set and can be installed in place of the existing injector connectors. For owners who prefer not to cut or solder the factory wiring harness, optional PADPDtoU10 plug-and-play adapters provide the necessary connection between the injectors and the existing vehicle wiring.
Fuel Injector Clinic uses this plug conversion because FIC chooses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. This gives your Viper fuel system a new injector foundation while providing either solder-in pigtails or optional plug-and-play adapters for the required electrical connection.
Fitment
- 2008 Dodge Viper ZB2
- 2009 Dodge Viper ZB2
- 2010 Dodge Viper ZB2
- 2013 Dodge Viper VX1
- 2014 Dodge Viper VX1
- 2015 Dodge Viper VX1
- 2016 Dodge Viper VX1
- 2017 Dodge Viper VX1
FAQs
Do the FIC is158-2150h injectors require a plug conversion?
Yes. The is158-2150h injector set requires an injector plug conversion. PGTDEN10 solder-in pigtails are included, or optional PADPDtoU10 plug-and-play adapters can be used to connect the injectors without cutting or soldering the factory wiring harness.
What tuning information comes with the FIC 2150cc Viper injector set?
Each injector is individually serial numbered and precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. The included Data Match Sheet provides detailed flow matching and latency information to help support accurate ECU calibration across all ten cylinders.
Upgrade Your Dodge Viper Fuel System with Beefcake Racing
When your Viper build demands serious fuel capacity, Beefcake Racing can help you select the right Fuel Injector Clinic injectors and supporting fuel system components for your performance goals. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
