Fuel Injector Clinic 1200cc High-Z Fuel Injector Set (is158-1200h) - 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
Give your 2008-2010 Dodge Viper ZB2 or 2013-2017 Viper VX1 the fuel capacity and precise injector control demanded by a serious performance V10 with the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. Previously offered as the IS158-1100H 1100cc set, the current is158-1200h package includes ten 1200cc saturated, high-impedance ball and seat injectors engineered for excellent linearity and short pulse width repeatability. That combination delivers substantial fuel capacity while retaining the predictable injector behavior needed for accurate tuning, strong drivability, and consistent performance across all ten cylinders.
Fuel Injector Clinic precisely matches each set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency results supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. The set is available with PGTJETR10Q solder-in pigtails for the required injector plug conversion or optional PADPJtoU10 plug-and-play adapters for installation without cutting or soldering the factory harness. FIC also includes the O-rings required for the listed factory applications, and every injector is backed by a lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is158-1200h
- Previous Part Number: IS158-1100H
- Flow Rating: 1200cc
- Injector Quantity: Set of 10
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball and seat
- Application: 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
- Matching: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Solder-In Pigtail Option: PGTJETR10Q
- Plug-and-Play Adapter Option: PADPJtoU10
- Plug Conversion Required: Yes, using solder-in pigtails or optional plug-and-play adapters
- O-Rings: Includes O-rings required for the listed factory applications
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of ten 1200cc fuel injectors for supported Dodge Viper V10 applications
- Designed for 2008-2010 Dodge Viper ZB2 and 2013-2017 Viper VX1 applications
- Current 1200cc replacement for the previous IS158-1100H injector set
- Saturated, high-impedance ball and seat injector design
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector control
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Superior short pulse width control helps provide excellent tunability and drivability
- Flow tested and rated at 43.5 psi (3 Bar)
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Available with PGTJETR10Q solder-in pigtails for injector plug conversion
- Optional PADPJtoU10 plug-and-play adapters allow installation without cutting or soldering the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Includes the O-rings required for the listed factory applications
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1200cc Fuel Delivery with Precise V10 Control
A performance Viper needs more than injectors capable of delivering additional fuel. With ten cylinders to feed, predictable injector behavior and precise low pulse width control are critical to building a calibration that performs well throughout the operating range. The is158-1200h combines 1200cc flow capacity with excellent linearity and short pulse width repeatability, giving your tuner a high-flow injector package designed to remain controllable during idle and part-throttle operation while delivering the fuel capacity demanded under load.
Data Match Technology for Ten-Cylinder Consistency
Injector consistency is especially important in a V10, where differences between individual injectors can affect cylinder-to-cylinder fueling. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the is158-1200h injectors as a complete set. Every injector is individually serial numbered, and its results are documented on the included Data Match Sheet with detailed flow matching and latency information. This provides valuable injector-specific data to support accurate ECU calibration and consistent fuel delivery across all ten cylinders.
Injector Plug Conversion Options
The is158-1200h requires a change from the factory injector plug configuration. Fuel Injector Clinic currently offers the set with PGTJETR10Q solder-in pigtails, which can be installed in place of the existing injector connectors. For owners who prefer not to cut or solder the factory wiring harness, optional PADPJtoU10 plug-and-play adapters provide the necessary connection between the injectors and the stock harness.
Fuel Injector Clinic uses this plug conversion because FIC chooses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. This approach gives your Viper a new performance injector foundation while providing either a solder-in or plug-and-play solution for the required electrical connection.
Fitment
- 2008 Dodge Viper ZB2
- 2009 Dodge Viper ZB2
- 2010 Dodge Viper ZB2
- 2013 Dodge Viper VX1
- 2014 Dodge Viper VX1
- 2015 Dodge Viper VX1
- 2016 Dodge Viper VX1
- 2017 Dodge Viper VX1
FAQs
Is the FIC is158-1200h the replacement for the previous 1100cc Viper injector set?
Yes. Fuel Injector Clinic identifies the current is158-1200h 1200cc injector set as the replacement for the previous IS158-1100H set. It is designed for the 2008-2010 Dodge Viper ZB2 and 2013-2017 Viper VX1.
Do the FIC is158-1200h injectors require a plug conversion?
Yes. Fuel Injector Clinic currently offers the set with PGTJETR10Q solder-in pigtails for the required connector conversion. Optional PADPJtoU10 plug-and-play adapters can be selected instead to connect the injectors to the stock harness without cutting or soldering.
Upgrade Your Dodge Viper Fuel System with Beefcake Racing
Whether you're upgrading a street-driven Viper or building a high-output V10 that demands substantially more fuel, Beefcake Racing can help you choose the right Fuel Injector Clinic injectors and supporting fuel system components for your combination. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
