Fuel Injector Clinic 1200cc-D High-Z Fuel Injector Set (is158-1200h-d) - 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
Give your 2008-2010 Dodge Viper ZB2 or 2013-2017 Viper VX1 the high-flow fuel delivery and precise injector control demanded by a serious performance V10 with the Fuel Injector Clinic 1200cc-D High-Z Fuel Injector Set. This complete package includes ten 1200cc-D saturated, high-impedance ball and seat injectors engineered for excellent linearity and short pulse width repeatability. The result is substantial fueling capability paired with the predictable injector behavior needed for accurate calibration, smooth drivability, and consistent performance across all ten cylinders.
Fuel Injector Clinic precisely matches each is158-1200h-d set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency results supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and state-of-the-art matching help make these high-flow injectors easier to tune while maintaining excellent drivability. The O-rings required for the listed factory applications are included, and every injector is backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is158-1200h-d
- Flow Rating: 1200cc-D
- Injector Quantity: Set of 10
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball and seat
- Application: 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
- Matching: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Includes O-rings required for the listed factory applications
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of ten 1200cc-D fuel injectors for supported Dodge Viper V10 applications
- Designed for 2008-2010 Dodge Viper ZB2 and 2013-2017 Viper VX1 applications
- Saturated, high-impedance ball and seat injector design
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector control
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Superior short pulse width control helps provide excellent tunability and drivability
- Flow tested and rated at 43.5 psi (3 Bar)
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes the O-rings required for the listed factory applications
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1200cc-D Performance for the Viper V10
High-output Viper combinations need plenty of fuel capacity, but maximum injector flow is only part of what makes an injector work well in a performance application. The is158-1200h-d combines 1200cc-D capacity with excellent linearity and short pulse width repeatability, helping the ECU maintain accurate control when fuel demand drops at idle and part throttle. That balance gives tuners a high-flow injector package designed to deliver serious performance without overlooking the drivability that matters on a street-driven Viper.
Data Match Technology for Ten-Cylinder Consistency
Consistent injector performance is especially important in a V10, where ten individual injectors need to deliver predictable fuel across the engine. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the is158-1200h-d injectors as a complete set. Every injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information. This gives your tuner valuable injector-specific data for accurate ECU calibration and consistent fuel delivery across all ten cylinders.
Engineered for Tunability and Drivability
Fuel Injector Clinic combines state-of-the-art injector matching with superior short pulse width control to make the is158-1200h-d easier to calibrate throughout the operating range. The injectors are tested under controlled conditions at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. FIC also supplies the O-rings required for the listed factory applications. If your Viper uses an aftermarket fuel rail or another non-standard fuel system configuration, injector fitment should be confirmed before ordering.
Fitment
- 2008 Dodge Viper ZB2
- 2009 Dodge Viper ZB2
- 2010 Dodge Viper ZB2
- 2013 Dodge Viper VX1
- 2014 Dodge Viper VX1
- 2015 Dodge Viper VX1
- 2016 Dodge Viper VX1
- 2017 Dodge Viper VX1
FAQs
Is is158-1200h-d the same injector set as is158-1200h?
No. Fuel Injector Clinic currently lists is158-1200h-d and is158-1200h as separate products for the same Viper generations. This product is specifically the is158-1200h-d 1200cc-D injector set, so it should not be confused with the standard is158-1200h version.
What tuning information comes with the FIC is158-1200h-d Viper injector set?
Each injector is individually serial numbered and precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. The included Data Match Sheet provides detailed flow matching and latency information to help support accurate ECU calibration across all ten cylinders.
Upgrade Your Dodge Viper Fuel System with Beefcake Racing
Whether you're building a high-powered street Viper or a serious performance V10 that demands substantially more fuel, Beefcake Racing can help you choose the right Fuel Injector Clinic injectors and supporting fuel system components for your combination. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
