Fuel Injector Clinic 775cc High-Z Fuel Injector Set (is158-0775h) - 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
Upgrade the fuel delivery in your 2008-2010 Dodge Viper ZB2 or 2013-2017 Viper VX1 with the Fuel Injector Clinic 775cc High-Z Fuel Injector Set. Built specifically for the Viper V10, this complete set includes ten 775cc saturated, high-impedance ball and seat injectors engineered for excellent linearity and short pulse width repeatability. The is158-0775h delivers increased fuel capacity while retaining the precise injector control needed for accurate tuning and strong drivability, making it a well-rounded choice for performance-focused Viper builds.
Fuel Injector Clinic precisely matches each set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency results supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and state-of-the-art matching help make these injectors easier to tune while maintaining excellent drivability. The set is drop-in for both size and plug, includes the O-rings required for the listed factory applications, and is backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is158-0775h
- Flow Rating: 775cc
- Injector Quantity: Set of 10
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball and seat
- Application: 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
- Installation: Drop-in for size and plug
- Plug Conversion Required: No
- Matching: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Includes O-rings required for the listed factory applications
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of ten 775cc fuel injectors for supported Dodge Viper V10 applications
- Designed for 2008-2010 Dodge Viper ZB2 and 2013-2017 Viper VX1 applications
- Saturated, high-impedance ball and seat injector design
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector control
- Drop-in sizing and plug configuration for straightforward installation
- No injector plug conversion required for the listed factory applications
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Superior short pulse width control helps provide excellent tunability and drivability
- Flow tested and rated at 43.5 psi (3 Bar)
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes the O-rings required for the listed factory applications
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
775cc Performance with Precise Fuel Control
Adding injector capacity is only part of building a properly matched Viper fuel system. The injectors also need to respond predictably when the ECU commands smaller amounts of fuel during idle, cruising, and part-throttle operation. Fuel Injector Clinic combines the 775cc flow capacity of the is158-0775h with excellent linearity and short pulse width repeatability, helping provide the control needed for accurate calibration while maintaining the drivability expected from a street-driven Viper.
Data Match Technology for V10 Consistency
Consistent injector performance becomes especially important when ten cylinders depend on accurate fuel delivery. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the is158-0775h injectors as a complete set. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information. This gives your tuner valuable injector-specific data for accurate ECU calibration and consistent fuel delivery throughout the V10.
Drop-In Size and Plug Installation
The is158-0775h is designed as a drop-in solution for both physical size and electrical plug in the listed factory Dodge Viper applications. No injector connector conversion is required, eliminating the need for solder-in pigtails or plug adapters when used with the factory configuration. Fuel Injector Clinic also supplies the O-rings required for installation. If your Viper uses an aftermarket fuel rail or another non-standard fuel system configuration, injector fitment should be confirmed before ordering.
Fitment
- 2008 Dodge Viper ZB2
- 2009 Dodge Viper ZB2
- 2010 Dodge Viper ZB2
- 2013 Dodge Viper VX1
- 2014 Dodge Viper VX1
- 2015 Dodge Viper VX1
- 2016 Dodge Viper VX1
- 2017 Dodge Viper VX1
FAQs
Are the FIC is158-0775h injectors drop-in for the Dodge Viper?
Yes. The is158-0775h injector set is specified as drop-in for both size and plug in the listed 2008-2010 Dodge Viper ZB2 and 2013-2017 Viper VX1 factory applications, so an injector plug conversion is not required.
What tuning information comes with the FIC 775cc Viper injector set?
Each injector is individually serial numbered and precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. The included Data Match Sheet provides detailed flow matching and latency information to help support accurate ECU calibration across all ten cylinders.
Upgrade Your Dodge Viper Fuel System with Beefcake Racing
Whether you're upgrading a street-driven Viper or building a higher-output V10 that needs additional fuel capacity, Beefcake Racing can help you choose the right Fuel Injector Clinic injectors and supporting fuel system components for your combination. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
