Fuel Injector Clinic 650cc High-Z Fuel Injector Set (is158-0650h) - 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
Upgrade the fuel delivery in your 2008-2010 Dodge Viper ZB2 or 2013-2017 Viper VX1 with the Fuel Injector Clinic 650cc High-Z Fuel Injector Set. Designed specifically for the Viper's V10, this complete set includes ten 650cc saturated, high-impedance ball and seat injectors engineered for excellent linearity and short pulse width repeatability. The is158-0650h is also designed as a drop-in solution for both injector size and plug, giving Viper owners a straightforward performance upgrade without requiring an injector connector conversion.
Fuel Injector Clinic precisely matches each set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency results supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and precise matching help make these injectors easier to tune while maintaining excellent drivability. The O-rings required for the listed factory applications are included, and every injector is backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is158-0650h
- Flow Rating: 650cc
- Injector Quantity: Set of 10
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball and seat
- Application: 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
- Installation: Drop-in for size and plug
- Plug Conversion Required: No
- Matching: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of ten 650cc fuel injectors for supported Dodge Viper V10 applications
- Designed for 2008-2010 Viper ZB2 and 2013-2017 Viper VX1 applications
- Saturated, high-impedance ball and seat injector design
- Drop-in sizing and plug configuration for straightforward installation
- No injector plug conversion required for the listed factory applications
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector control
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Superior short pulse width control helps provide excellent tunability and drivability
- Flow tested and rated at 43.5 psi (3 Bar)
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes the O-rings required for the listed factory applications
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Performance Fueling with Viper-Friendly Drivability
A performance injector needs to deliver additional fuel when the engine demands it without sacrificing control when fuel demand is low. Fuel Injector Clinic combines the 650cc flow capacity of the is158-0650h with excellent linearity and short pulse width repeatability, helping the ECU accurately control fuel delivery at idle and part throttle. For Viper owners who want increased fueling capability while retaining predictable street manners, that balance of flow and control is every bit as important as the injector's maximum capacity.
Data Match Technology for V10 Consistency
Consistent injector performance is especially important when ten cylinders need to work together. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the is158-0650h injectors as a complete set. Each injector is individually serial numbered, and its results are documented on the included Data Match Sheet with detailed flow matching and latency information. This gives your tuner valuable injector data for accurate ECU calibration and consistent fuel delivery throughout the V10.
Drop-In Size and Plug Installation
The is158-0650h is designed as a drop-in injector solution for both physical size and electrical plug in the listed factory Viper applications. No injector plug conversion is required, eliminating the need to cut or solder the vehicle wiring harness or add connector adapters. Fuel Injector Clinic also supplies the O-rings required for the factory application. If your Viper uses an aftermarket fuel rail or another non-standard fuel system configuration, fitment should be confirmed before ordering.
Fitment
- 2008 Dodge Viper ZB2
- 2009 Dodge Viper ZB2
- 2010 Dodge Viper ZB2
- 2013 Dodge Viper VX1
- 2014 Dodge Viper VX1
- 2015 Dodge Viper VX1
- 2016 Dodge Viper VX1
- 2017 Dodge Viper VX1
FAQs
Are the FIC is158-0650h injectors drop-in for the Dodge Viper?
Yes. Fuel Injector Clinic specifies the is158-0650h as drop-in for both size and plug in the listed 2008-2010 Dodge Viper ZB2 and 2013-2017 Viper VX1 applications, so an injector plug conversion is not required.
What tuning information comes with the Fuel Injector Clinic 650cc Viper injector set?
Each injector is individually serial numbered and precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. The included Data Match Sheet provides detailed flow matching and latency information to help support accurate ECU calibration across all ten cylinders.
Upgrade Your Dodge Viper Fuel System with Beefcake Racing
Whether you're upgrading a street-driven Viper or building a higher-output V10 that needs additional fuel capacity, Beefcake Racing can help you select the right Fuel Injector Clinic injectors and supporting fuel system components for your combination. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
