Fuel Injector Clinic 525cc High-Z Fuel Injector Set (is158-0525h) - 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
Upgrade the fuel delivery in your 2008-2010 Dodge Viper ZB2 or 2013-2017 Viper VX1 with the Fuel Injector Clinic 525cc High-Z Fuel Injector Set. Designed specifically for the Viper V10, this complete set includes ten 525cc saturated, high-impedance ball and seat injectors engineered for excellent linearity and short pulse width repeatability. FIC precisely flow matches each set to within 1 percent, giving your tuner a consistent foundation for accurate fuel delivery while maintaining the smooth drivability expected from a street-driven Viper. Best of all, the is158-0525h is drop-in for both size and plug, making installation straightforward with the factory configuration.
Each injector within the set is individually numbered, with its results documented on the detailed flow sheet included with the injectors. Fuel Injector Clinic flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances help make the injectors easy to tune and provide excellent drivability. FIC also includes the O-rings required for the listed factory applications, and every injector is backed by a lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is158-0525h
- Flow Rating: 525cc
- Injector Quantity: Set of 10
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball and seat
- Application: 2008-2010 Dodge Viper ZB2 / 2013-2017 Viper VX1
- Flow Matching: Precisely flow matched to within 1 percent
- Installation: Drop-in for size and plug
- Plug Conversion Required: No
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Includes O-rings required for the listed factory applications
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of ten 525cc fuel injectors for supported Dodge Viper V10 applications
- Designed for 2008-2010 Dodge Viper ZB2 and 2013-2017 Viper VX1 applications
- Saturated, high-impedance ball and seat injector design
- Precisely flow matched to within 1 percent as a complete set
- Each injector is individually numbered with results supplied on a detailed flow sheet
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector control
- Superior short pulse width control helps provide excellent tunability and drivability
- Tight manufacturing tolerances promote consistent injector performance
- Drop-in sizing and plug configuration for straightforward installation
- No injector plug conversion required for the listed factory applications
- Flow tested and rated at 43.5 psi (3 Bar)
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes the O-rings required for the listed factory applications
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Precisely Matched Fuel Delivery for the Viper V10
With ten cylinders relying on consistent fuel delivery, injector matching matters. Fuel Injector Clinic precisely flow matches the is158-0525h injectors to within 1 percent and individually numbers every injector in the set. The detailed flow sheet provides the results for each injector, giving your tuner useful data while helping ensure consistent fueling across the Viper's V10.
Excellent Linearity and Short Pulse Width Control
Performance injectors need to deliver more than maximum flow. They also need to remain predictable when the ECU commands very small amounts of fuel. The is158-0525h injectors combine excellent linearity, short pulse width repeatability, and tight manufacturing tolerances to help provide accurate low pulse width control. That makes them easier to tune while supporting the smooth idle and part-throttle drivability that matter in a street-driven Viper.
Drop-In Size and Plug Installation
The is158-0525h is designed as a drop-in solution for both physical size and electrical plug in the listed factory Viper applications. No injector connector conversion is required, eliminating the need for solder-in pigtails or plug adapters when used with the factory configuration. Fuel Injector Clinic also supplies the O-rings required for installation. If your Viper uses an aftermarket fuel rail or another non-standard fuel system configuration, injector fitment should be confirmed before ordering.
Fitment
- 2008 Dodge Viper ZB2
- 2009 Dodge Viper ZB2
- 2010 Dodge Viper ZB2
- 2013 Dodge Viper VX1
- 2014 Dodge Viper VX1
- 2015 Dodge Viper VX1
- 2016 Dodge Viper VX1
- 2017 Dodge Viper VX1
FAQs
Are the Fuel Injector Clinic is158-0525h injectors flow matched?
Yes. Fuel Injector Clinic precisely flow matches its high-performance injector sets to within 1 percent. Each injector is individually numbered, and the results for every injector are supplied on the detailed flow sheet included with the set.
Do the FIC is158-0525h injectors require a plug conversion?
No. Fuel Injector Clinic specifies the is158-0525h as drop-in for both size and plug in the listed 2008-2010 Dodge Viper ZB2 and 2013-2017 Viper VX1 factory applications, so an injector plug conversion is not required.
Upgrade Your Dodge Viper Fuel System with Beefcake Racing
Whether you're upgrading a street-driven Viper or putting together a performance V10 that needs precise and consistent fuel delivery, Beefcake Racing can help you choose the right Fuel Injector Clinic injectors and supporting fuel system components for your build. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
