Fuel Injector Clinic 1650cc High-Z Fuel Injector Set (is157-1650h) - 2003-2006 Dodge Viper ZB1
Step up the fueling capability of your 2003-2006 Dodge Viper ZB1 with the Fuel Injector Clinic 1650cc High-Z Fuel Injector Set. Built for serious performance while maintaining the precise control needed for street drivability, this complete V10 package includes ten 1650cc saturated, high-impedance ball and seat injectors engineered for excellent linearity and short pulse width repeatability. Even better, the is157-1650h is designed for easy drop-in installation with a factory-style connector, so no injector plug conversion is required.
Fuel Injector Clinic precisely matches each set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency results supplied on the included Data Match Sheet. FIC flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and state-of-the-art matching help make these large injectors easier to tune while maintaining excellent drivability. The O-rings required for the listed factory application are included, and every injector is backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is157-1650h
- Flow Rating: 1650cc
- Injector Quantity: Set of 10
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball and seat
- Application: 2003-2006 Dodge Viper ZB1
- Installation: Drop-in fitment with factory-style connector
- Plug Conversion Required: No
- Matching: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of ten 1650cc fuel injectors for the 2003-2006 Dodge Viper ZB1
- High-flow injector capacity for serious performance Viper applications
- Saturated, high-impedance ball and seat injector design
- Easy drop-in fitment for the listed factory application
- Factory-style electrical connector requires no injector plug conversion
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector control
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Superior short pulse width control helps provide excellent tunability and drivability
- Flow tested and rated at 43.5 psi (3 Bar)
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes the O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Serious Fuel Capacity with Precise Low-Speed Control
A 1650cc injector gives a high-output Viper substantial fuel delivery capability, but big injectors still need to behave predictably when the engine only needs a small amount of fuel. Fuel Injector Clinic combines high flow capacity with excellent linearity and short pulse width repeatability, helping the ECU maintain precise control during idle and part-throttle operation. For powerful Viper builds that still see street use, that balance between maximum fueling capability and low pulse width control is critical to achieving both performance and drivability.
Data Match Technology for V10 Consistency
With ten cylinders relying on consistent fuel delivery, injector matching is especially important on the Dodge Viper. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match all ten injectors as a complete set. Each injector is individually serial numbered, and its results are documented on the included Data Match Sheet with detailed flow matching and latency information. This gives your tuner valuable injector-specific data for building an accurate calibration and maintaining consistent fuel delivery throughout the V10.
Drop-In Installation with No Plug Conversion
The is157-1650h offers a major installation advantage over several other high-flow injector options for the 2003-2006 Viper ZB1. Fuel Injector Clinic equips this set with a factory-style connector for easy drop-in installation, eliminating the need to cut or solder the vehicle wiring harness or add plug conversion adapters. FIC also supplies the O-rings required for the listed factory application. If your Viper uses an aftermarket fuel rail or another non-standard fuel system configuration, fitment should be confirmed before ordering.
Fitment
- 2003 Dodge Viper ZB1
- 2004 Dodge Viper ZB1
- 2005 Dodge Viper ZB1
- 2006 Dodge Viper ZB1
FAQs
Do the FIC is157-1650h injectors require a plug conversion on the 2003-2006 Dodge Viper?
No. The Fuel Injector Clinic is157-1650h set features a factory-style connector and is designed for easy drop-in installation in the listed 2003-2006 Dodge Viper ZB1 application, so no injector plug conversion is required.
What tuning information comes with the FIC 1650cc Viper injector set?
Each injector is individually serial numbered and precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. The included Data Match Sheet provides detailed flow matching and latency information to help support accurate ECU calibration across all ten cylinders.
Upgrade Your Dodge Viper Fuel System with Beefcake Racing
When your Viper build needs serious fuel capacity without sacrificing precise injector control, Beefcake Racing can help you put together the right Fuel Injector Clinic injector and supporting fuel system combination. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
