Fuel Injector Clinic 660cc High-Z Fuel Injector Set (is157-0660h-sp) - 2003-2006 Dodge Viper ZB1
Upgrade your 2003-2006 Dodge Viper ZB1 with a precisely matched fuel injector package built to deliver the flow, control, and consistency a performance V10 demands. The Fuel Injector Clinic 660cc High-Z Fuel Injector Set includes ten saturated, high-impedance ball and seat injectors engineered for excellent linearity and short pulse width repeatability. With all ten injectors precisely flow matched to within 1 percent, this set gives your tuner a consistent foundation for accurate fuel delivery while maintaining the drivability needed for a street-driven Viper.
Each injector is individually numbered, with its results documented on the detailed flow sheet included with the set. Fuel Injector Clinic flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. The set includes the O-rings required for the listed factory application along with PGTUSC10 solder-in pigtails for the required injector plug conversion. Optional PADPUtoJ10 plug-and-play adapters are available for owners who want to retain the factory harness without cutting or soldering. Every injector is backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is157-0660h-sp
- Flow Rating: 660cc
- Injector Quantity: Set of 10
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball and seat
- Application: 2003-2006 Dodge Viper ZB1
- Flow Matching: Precisely flow matched to within 1 percent
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Option: PGTUSC10 solder-in pigtails
- Optional Wiring Adapter: PADPUtoJ10 plug-and-play adapters
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of ten 660cc fuel injectors for the 2003-2006 Dodge Viper ZB1
- Saturated, high-impedance ball and seat injector design
- Precisely flow matched to within 1 percent as a complete set
- Excellent linearity for consistent, predictable fuel delivery
- Strong short pulse width repeatability for precise injector control
- Each injector is individually numbered
- Detailed injector results supplied on the included flow sheet
- Tight manufacturing tolerances help provide excellent tunability and drivability
- Flow tested and rated at 43.5 psi (3 Bar)
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes PGTUSC10 solder-in pigtails for the required injector plug conversion
- Optional PADPUtoJ10 plug-and-play adapters eliminate the need to cut or solder the factory wiring harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Includes the O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Precisely Matched Fuel Delivery for the Viper V10
Consistent injector performance becomes especially important when ten cylinders need to receive accurately controlled fuel. Fuel Injector Clinic precisely flow matches the is157-0660h-sp set to within 1 percent, individually numbers every injector, and supplies the results on a detailed flow sheet. Excellent linearity, short pulse width repeatability, and tight manufacturing tolerances give your tuner a predictable injector set to work with, helping support accurate calibration without sacrificing smooth idle and part-throttle drivability.
Injector Plug Conversion Options
The is157-0660h-sp injectors require a change from the factory injector plug on the Viper's wiring harness. PGTUSC10 solder-in pigtails are included with the injector set and can be installed in place of the existing injector connectors. For owners who do not want to cut or solder the factory harness, optional PADPUtoJ10 plug-and-play adapters provide a direct connection between the new injectors and the existing vehicle wiring.
Fuel Injector Clinic uses this plug conversion because FIC chooses brand-new, unused injectors for its performance applications rather than relying on remanufactured injectors or core programs. This approach allows your Viper fuel system upgrade to start with new injectors while the included pigtails or optional plug-and-play adapters provide the necessary electrical connection.
Fitment
- 2003 Dodge Viper ZB1
- 2004 Dodge Viper ZB1
- 2005 Dodge Viper ZB1
- 2006 Dodge Viper ZB1
FAQs
Do the FIC is157-0660h-sp injectors plug directly into the factory Dodge Viper wiring harness?
No. This injector set requires an injector plug conversion. PGTUSC10 solder-in pigtails are included, or optional PADPUtoJ10 plug-and-play adapters can be used to connect the injectors to the factory harness without cutting or soldering.
Are the Fuel Injector Clinic 660cc Viper injectors flow matched?
Yes. Fuel Injector Clinic precisely flow matches its high-performance injector sets to within 1 percent. Each injector is individually numbered, and the results for all ten injectors are supplied on the detailed flow sheet included with the set.
Upgrade Your Dodge Viper Fuel System with Beefcake Racing
Whether you're upgrading a street-driven Viper or putting together a higher-performance ZB1 combination, Beefcake Racing can help you choose the right Fuel Injector Clinic injectors and wiring solution for your setup. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
