Fuel Injector Clinic 540cc High-Z Fuel Injector Set (is157-0540h) - 2003-2006 Dodge Viper ZB1
Upgrade the fuel delivery in your 2003-2006 Dodge Viper ZB1 with the Fuel Injector Clinic 540cc High-Z Fuel Injector Set. Built specifically for the Viper's V10, this complete set includes ten 540cc saturated, high-impedance ball and seat injectors engineered for excellent linearity, short pulse width repeatability, and consistent fuel delivery. FIC precisely flow matches each set to within 1 percent, giving performance-minded Viper owners a matched injector package designed for accurate tuning and strong drivability.
Every injector within the set is individually numbered, with its results documented on the included detailed flow sheet. Fuel Injector Clinic flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid. The injectors include the O-rings required for the listed factory application and are supplied with PGTUSC10 solder-in pigtails. For an installation without cutting or soldering the factory harness, optional PADPUtoJ10 plug-and-play adapters can be selected instead. Every injector is backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is157-0540h
- Flow Rating: 540cc
- Injector Quantity: Set of 10
- Impedance: High impedance / High-Z
- Injector Type: Saturated ball and seat
- Application: 2003-2006 Dodge Viper ZB1
- Flow Matching: Precisely flow matched to within 1 percent
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Wiring Option: PGTUSC10 solder-in pigtails
- Optional Wiring Adapter: PADPUtoJ10 plug-and-play adapters
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of ten 540cc injectors for the 2003-2006 Dodge Viper ZB1 V10
- Saturated, high-impedance ball and seat injector design
- Precisely flow matched to within 1 percent as a complete set
- Each injector is individually numbered for identification
- Detailed injector results supplied on the included flow sheet
- Excellent linearity for predictable fuel delivery
- Strong short pulse width repeatability for precise low pulse width operation
- Tight manufacturing tolerances help provide excellent tunability and drivability
- Flow tested and rated at 43.5 psi (3 Bar)
- Tested at 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes PGTUSC10 solder-in pigtails for the required injector plug conversion
- Optional PADPUtoJ10 plug-and-play adapters eliminate the need to cut or solder the factory wiring harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Includes the O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Matched Fuel Delivery for the Viper V10
With ten cylinders relying on consistent fuel delivery, injector matching is especially important in the Dodge Viper. Fuel Injector Clinic precisely flow matches every is157-0540h set to within 1 percent, individually numbers each injector, and supplies detailed results with the set. Combined with excellent linearity, short pulse width repeatability, and tight manufacturing tolerances, this gives your tuner a consistent foundation for accurate calibration while helping preserve the drivability expected from a street-driven Viper.
Injector Plug Conversion Options
The is157-0540h injectors require a change from the factory injector plug on the vehicle's wiring harness. PGTUSC10 solder-in pigtails are included, allowing the existing injector plugs to be replaced by cutting and soldering the new connectors into the harness. For owners who prefer not to modify the factory wiring, optional PADPUtoJ10 plug-and-play adapters connect the injectors to the existing harness without cutting or soldering.
Fuel Injector Clinic uses this plug conversion because the company chooses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injector assemblies. For Viper owners building a fuel system around reliability and consistency, that means starting with new injectors rather than previously used injector cores.
Fitment
- 2003 Dodge Viper ZB1
- 2004 Dodge Viper ZB1
- 2005 Dodge Viper ZB1
- 2006 Dodge Viper ZB1
FAQs
Do the FIC is157-0540h injectors plug directly into the factory Viper wiring harness?
No. The injectors require an injector plug conversion. PGTUSC10 solder-in pigtails are included with the set, or optional PADPUtoJ10 plug-and-play adapters can be selected to connect the injectors to the factory harness without cutting or soldering.
Are the FIC 540cc Dodge Viper injectors flow matched?
Yes. Fuel Injector Clinic precisely flow matches its high-performance injector sets to within 1 percent. Each injector is individually numbered, and its results are included on the detailed flow sheet supplied with the set.
Upgrade Your Dodge Viper Fuel System with Beefcake Racing
Whether you're refreshing the fuel system or building a higher-performance 2003-2006 Viper ZB1, Beefcake Racing can help you select the right Fuel Injector Clinic injectors and wiring option for your setup. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
