Fuel Injector Clinic 650cc High-Z Fuel Injector Set (IS156-0650H) - 2008-2013 Dodge 4.7L / 2003-Present 5.7L
Upgrade your Dodge 4.7L or 5.7L fuel system with the Fuel Injector Clinic IS156-0650H 650cc High-Z Fuel Injector Set. This complete set of eight saturated, high-impedance injectors flows 650cc/min, or 62 lbs/hr, at 43.5 psi (3 Bar) and 750cc/min, or 72 lbs/hr, at the Dodge OE fuel pressure of 58 psi (4 Bar). Built for performance applications that need increased fuel capacity while retaining precise injector control, these injectors deliver excellent linearity and short pulse width repeatability for predictable tuning and strong drivability.
Each IS156-0650H set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency results provided on the included Data Match Sheet. Fuel Injector Clinic flow tests and rates these injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using calibration fluid. The IS156-0650H is designed as a drop-in upgrade for both size and electrical plug in the listed factory applications, eliminating the need for a connector conversion. Plug-and-play Dodge ECU data is also available from Fuel Injector Clinic.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS156-0650H
- Injector Quantity: Set of 8
- Flow at 43.5 psi (3 Bar): 650cc/min / 62 lbs/hr
- Flow at OE 58 psi (4 Bar): 750cc/min / 72 lbs/hr
- Impedance: High impedance / High-Z
- Injector Type: Saturated
- Matching: Fuel Injector Clinic Data Match Technology
- Installation: Drop-in for size and plug
- Plug Conversion Required: No
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Dodge ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory applications
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of eight 650cc high-impedance fuel injectors
- 650cc/min and 62 lbs/hr flow rating at 43.5 psi (3 Bar)
- 750cc/min and 72 lbs/hr flow at Dodge OE 58 psi (4 Bar) fuel pressure
- Saturated, High-Z injector design
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability
- Designed for excellent tunability and drivability
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Flow tested at 43.5 psi (3 Bar) and 90 degrees F using calibration fluid
- Drop-in sizing for the listed factory applications
- Factory-compatible electrical plug eliminates the need for connector conversion
- Plug-and-play Dodge ECU data available from Fuel Injector Clinic
- Includes O-rings required for the listed factory applications
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
650cc Rated Flow and 72 lbs/hr at OE Fuel Pressure
Fuel Injector Clinic rates the IS156-0650H at 650cc/min, or 62 lbs/hr, at its standard 43.5 psi (3 Bar) test pressure. At the Dodge OE fuel pressure of 58 psi (4 Bar), flow increases to 750cc/min, or 72 lbs/hr. Because injector flow changes with fuel pressure, both ratings are important when sizing and tuning a performance fuel system. The OE-pressure rating gives you and your tuner a clearer picture of the injector capacity available at the vehicle's operating fuel pressure.
Data Match Technology for Precise Fuel Delivery
Injector capacity is only part of the equation when building a properly calibrated fuel system. Consistent injector behavior across all eight cylinders is equally important. Fuel Injector Clinic precisely matches each IS156-0650H set using its proprietary Data Match Technology. Every injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information to give your tuner dependable data for calibration.
Short Pulse Width Control and Drivability
Performance injectors still need to accurately meter small quantities of fuel during idle, cruising, and part-throttle operation. The IS156-0650H combines increased fuel capacity with excellent linearity, superior short pulse width control, and repeatability. This predictable response helps the ECU accurately control fuel delivery throughout the operating range, making the injectors easier to tune while supporting excellent drivability in a properly calibrated Dodge.
Drop-In Size and Plug Installation
The IS156-0650H is designed as a drop-in upgrade for both physical size and electrical plug in the listed factory applications. No injector connector conversion is required, eliminating the need for solder-in pigtails or plug adapters. Fuel Injector Clinic also supplies the O-rings required for the listed factory applications, while plug-and-play Dodge ECU data is available to support calibration. If your Dodge uses aftermarket fuel rails or another non-standard fuel system configuration, injector fitment should be confirmed before ordering.
Fitment
- 2008 Dodge 4.7L
- 2009 Dodge 4.7L
- 2010 Dodge 4.7L
- 2011 Dodge 4.7L
- 2012 Dodge 4.7L
- 2013 Dodge 4.7L
- 2003 Dodge 5.7L
- 2004 Dodge 5.7L
- 2005 Dodge 5.7L
- 2006 Dodge 5.7L
- 2007 Dodge 5.7L
- 2008 Dodge 5.7L
- 2009 Dodge 5.7L
- 2010 Dodge 5.7L
- 2011 Dodge 5.7L
- 2012 Dodge 5.7L
- 2013 Dodge 5.7L
- 2014 Dodge 5.7L
- 2015 Dodge 5.7L
- 2016 Dodge 5.7L
- 2017 Dodge 5.7L
- 2018 Dodge 5.7L
- 2019 Dodge 5.7L
- 2020 Dodge 5.7L
- 2021 Dodge 5.7L
- 2022 Dodge 5.7L
- 2023 Dodge 5.7L
- 2024 Dodge 5.7L
- 2025 Dodge 5.7L
- 2026 Dodge 5.7L
- Present Dodge 5.7L
FAQs
Why are the FIC IS156-0650H injectors rated at both 650cc and 750cc?
Both ratings are correct because injector flow changes with fuel pressure. Fuel Injector Clinic rates the IS156-0650H at 650cc/min, or 62 lbs/hr, at 43.5 psi (3 Bar). At the Dodge OE fuel pressure of 58 psi (4 Bar), the injectors flow 750cc/min, or 72 lbs/hr.
Do the FIC IS156-0650H injectors require a connector conversion?
No. Fuel Injector Clinic specifies the IS156-0650H as drop-in for both size and plug in the listed factory applications, so no injector connector conversion is required.
Upgrade Your Dodge Fuel System with Beefcake Racing
Whether you're upgrading a Dodge 4.7L or building a higher-output 5.7L combination that needs additional fuel capacity, Beefcake Racing can help you select the right Fuel Injector Clinic injectors and supporting fuel system components for your setup. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
