Fuel Injector Clinic 1650cc High-Z Fuel Injector Set (IS154-1650H) - 1994-1998 Dodge 5.2L / 5.9L
Give your 1994-1998 Dodge 5.2L or 5.9L the serious fuel capacity needed for a high-output build without sacrificing the injector control that matters on the street. The Fuel Injector Clinic IS154-1650H includes eight saturated, high-impedance injectors rated at 1650cc/min, or 160 lbs/hr, at 43.5 psi (3 Bar). At the Dodge OE fuel pressure of 58 psi (4 Bar), flow increases to 1900cc/min, or 180 lbs/hr. Excellent linearity, short pulse width repeatability, and strong idle characteristics make this set a powerful combination of high-flow capability and street-friendly control.
Fuel Injector Clinic's 1650cc High-Z injector uses stainless alloy valve construction for broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each set is precisely matched using FIC's proprietary Data Match Technology, with every injector individually serial numbered and its results documented on the included Data Match Sheet. These injectors feature factory-style connectors and drop-in installation for the listed factory applications, eliminating the need for an injector plug conversion. Plug-and-play Dodge ECU data is also available from Fuel Injector Clinic.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: IS154-1650H
- Injector Quantity: Set of 8
- Flow at 43.5 psi (3 Bar): 1650cc/min / 160 lbs/hr
- Flow at OE 58 psi (4 Bar): 1900cc/min / 180 lbs/hr
- Impedance: High impedance / High-Z
- Injector Type: Saturated
- Valve Construction: Stainless alloy
- Application: 1994-1998 Dodge 5.2L / 5.9L
- Installation: Drop-in fitment with factory-style connector
- Plug Conversion Required: No
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Matching: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- ECU Data: Plug-and-play Dodge ECU data available from Fuel Injector Clinic
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of eight 1650cc high-impedance injectors for 1994-1998 Dodge 5.2L and 5.9L applications
- 1650cc/min and 160 lbs/hr flow rating at 43.5 psi (3 Bar)
- 1900cc/min and 180 lbs/hr flow at the OE 58 psi (4 Bar) fuel pressure
- High-flow capacity for serious performance applications
- Saturated, High-Z injector design
- Stainless alloy valve construction
- Compatible with pump gasoline and E85
- Compatible with Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Excellent idle performance for street-driven applications
- Excellent linearity for consistent and predictable fuel delivery
- Strong short pulse width repeatability for precise injector control
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Drop-in installation with factory-style electrical connectors
- No injector plug conversion required for the listed factory applications
- Plug-and-play Dodge ECU data available from Fuel Injector Clinic
- Includes the O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
1650cc Rated Flow and 180 lbs/hr at OE Fuel Pressure
The IS154-1650H provides substantial fuel capacity for high-output Dodge combinations while giving you clear flow data at both standard test pressure and the vehicle's OE pressure. Fuel Injector Clinic rates each injector at 1650cc/min, or 160 lbs/hr, at 43.5 psi (3 Bar). At the Dodge OE fuel pressure of 58 psi (4 Bar), flow increases to 1900cc/min, or 180 lbs/hr. Understanding both ratings gives you and your tuner a more accurate picture of the injector's available fuel delivery at the pressure used by the vehicle.
High-Flow Performance Without Sacrificing Drivability
Large injectors need to do more than deliver fuel at wide-open throttle. They also need to respond accurately when the ECU commands much smaller quantities of fuel during idle, cruising, and part-throttle operation. Fuel Injector Clinic combines the substantial capacity of its 1650cc High-Z injector with excellent linearity, short pulse width repeatability, and strong idle performance. The result is an injector designed to support serious horsepower while retaining the control needed for a properly calibrated street-driven Dodge.
Data Match Technology for Consistent Fuel Delivery
Fuel Injector Clinic precisely matches each IS154-1650H set using its proprietary Data Match Technology. Every injector is individually serial numbered, and its results are provided on the included Data Match Sheet with detailed flow matching and latency information. Consistent injector behavior across all eight cylinders gives your tuner better data to work with and helps support accurate, repeatable fuel delivery throughout the engine's operating range.
Broad Fuel Compatibility
The 1650cc High-Z injector uses stainless alloy valve construction that allows it to work with a broad range of performance fuels. Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. This makes the IS154-1650H a versatile choice for performance combinations that may use different fuels as power goals and tuning requirements evolve.
Drop-In Installation with Factory-Style Connectors
The IS154-1650H features easy drop-in installation with factory-style electrical connectors for the listed factory applications, so an injector plug conversion is not required. Fuel Injector Clinic also supplies the O-rings required for the factory application. If your Dodge uses an aftermarket fuel rail or another non-standard fuel system configuration, injector fitment should be confirmed before ordering.
Fitment
- 1994 Dodge 5.2L / 5.9L
- 1995 Dodge 5.2L / 5.9L
- 1996 Dodge 5.2L / 5.9L
- 1997 Dodge 5.2L / 5.9L
- 1998 Dodge 5.2L / 5.9L
FAQs
Do the FIC IS154-1650H injectors require a plug conversion?
No. Fuel Injector Clinic specifies the IS154-1650H with easy drop-in fitment and factory-style electrical connectors for the listed 1994-1998 Dodge 5.2L and 5.9L applications, so an injector plug conversion is not required.
What fuels are compatible with the FIC IS154-1650H injectors?
Fuel Injector Clinic specifies its 1650cc High-Z injector for use with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Its stainless alloy valve construction provides the broad fuel compatibility needed for a wide range of performance combinations.
Upgrade Your Dodge Fuel System with Beefcake Racing
Whether you're building a powerful street-driven 5.2L or 5.9L Dodge or a serious high-output combination that demands substantially more fuel, Beefcake Racing can help you choose the right Fuel Injector Clinic injectors and supporting fuel system components for your setup. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
