Fuel Injector Clinic 1400cc High-Z Fuel Injector Set (is153-1400H) - Dodge Hemi SRT-8 / 5.7
Give your Dodge Hemi the fuel delivery capacity and precision required for serious performance with the Fuel Injector Clinic 1400cc High-Z Fuel Injector Set. Designed for Dodge Hemi SRT-8 and 5.7 applications, this eight-injector set is rated at 1400cc with 155 lb/hr of flow at the OE 58 psi fuel pressure. These saturated, high-impedance injectors are designed as a drop-in solution for both size and plug, combining substantial fueling capability with the linearity, short pulse width repeatability, and drivability needed for a properly calibrated high-performance Hemi.
Fuel Injector Clinic precisely matches every set using its proprietary Data Match Technology. Each injector is individually serial numbered, with detailed matching and latency results supplied on the included Data Match Sheet. FIC also provides plug-and-play Dodge ECU data to support calibration. The injectors are flow tested at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid, while superior short pulse width control helps provide predictable fuel delivery and excellent tunability throughout the operating range.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is153-1400H
- Flow Rating: 1400cc
- Flow at OE Fuel Pressure: 155 lb/hr at 58 psi
- Injector Quantity: Set of 8
- Impedance: High impedance / High-Z
- Injector Type: Saturated
- Application: Dodge Hemi SRT-8 / 5.7
- Installation: Drop-in for size and plug
- Matching: Fuel Injector Clinic Data Match Technology
- ECU Data: Plug-and-play Dodge ECU data available from Fuel Injector Clinic
- Flow Test Pressure: 43.5 psi (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1400cc high-flow injectors for Dodge Hemi SRT-8 and 5.7 applications
- Rated at 155 lb/hr at the OE 58 psi fuel pressure
- Saturated, high-impedance injector design
- Drop-in sizing and plug configuration for straightforward installation
- Excellent linearity for predictable fuel delivery
- Strong short pulse width repeatability for precise low pulse width control
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Plug-and-play Dodge ECU data available from Fuel Injector Clinic
- Superior short pulse width control helps provide excellent tunability and drivability
- Flow tested at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid
- Includes O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
High-Flow Fueling with Street-Friendly Control
High-horsepower Hemi combinations need plenty of injector capacity, but maximum flow is only useful when the ECU can accurately control it. Fuel Injector Clinic combines the 1400cc capacity of the is153-1400H with excellent linearity and short pulse width repeatability, helping the injector remain predictable during low pulse width operation. That gives tuners the control needed to support serious performance while maintaining the drivability expected from a street-driven Hemi.
Data Match Technology for Precise Tuning
Fuel Injector Clinic's proprietary Data Match Technology precisely matches the eight injectors as a complete set rather than relying solely on nominal flow ratings. Every injector is individually serial numbered, and the included Data Match Sheet provides detailed matching and latency information. Combined with available plug-and-play Dodge ECU data, this gives your tuner a strong foundation for accurate calibration and consistent fuel delivery across all eight cylinders.
Drop-In Hemi Installation
The is153-1400H injector set is designed as a drop-in solution for both physical size and electrical plug in the listed Dodge Hemi application. The necessary O-rings for the factory application are included, helping simplify installation while eliminating unnecessary fuel injector fitment complications. If your Hemi uses an aftermarket fuel rail or another non-standard fuel system configuration, injector fitment should be confirmed before ordering.
Fitment
- Dodge Hemi SRT-8 applications
- Dodge Hemi 5.7 applications
FAQs
What is the flow rating of the Fuel Injector Clinic is153-1400H injector set?
The is153-1400H is a 1400cc Fuel Injector Clinic injector set rated at 155 lb/hr at the Dodge OE 58 psi fuel pressure. The set includes eight saturated, high-impedance injectors.
Are the FIC is153-1400H injectors drop-in for Dodge Hemi applications?
Yes. Fuel Injector Clinic specifies the is153-1400H injector set as drop-in for both size and plug in the listed Dodge Hemi SRT-8 and 5.7 application. FIC also makes plug-and-play Dodge ECU data available to support proper calibration.
Upgrade Your Hemi Fuel System with Beefcake Racing
Whether you're upgrading a street-driven Hemi or building a serious high-output combination, Beefcake Racing can help you select the right Fuel Injector Clinic injectors and supporting fuel system components for your setup. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
