Fuel Injector Clinic 1000cc High-Z Fuel Injector Set (is153-1000h-sc) - Dodge Hemi Gen 1-4 Whipple Supercharger
Feed your Whipple-supercharged Dodge Hemi with a fuel injector package engineered for the demands of forced induction. The Fuel Injector Clinic 1000cc High-Z Fuel Injector Set includes eight saturated, high-impedance injectors that flow 1000cc/min (85 lb/hr) at 43.5 psi (3 Bar) and 1040cc/min (100 lb/hr) at the OE 58 psi (4 Bar) fuel pressure. Designed specifically for Dodge Hemi Gen 1-4 Whipple Supercharger applications, these injectors are drop-in for both size and plug, making them a straightforward upgrade without sacrificing the precise fuel control needed for a properly tuned performance build.
Fuel Injector Clinic combines high-flow capability with excellent linearity and short pulse width repeatability to deliver predictable injector behavior across the operating range. Each set is precisely matched using FIC's proprietary Data Match Technology, and every injector is individually serial numbered with its results documented on the included Data Match Sheet. Plug-and-play Dodge ECU data is also available from Fuel Injector Clinic to help simplify calibration. FIC flow tests and rates its injectors at 43.5 psi (3 Bar) and 90 degrees F fuel temperature using CF-16B calibration fluid.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is153-1000h-sc
- Application: Dodge Hemi Gen 1-4 with Whipple Supercharger
- Injector Quantity: Set of 8
- Flow Rate at 43.5 psi: 1000cc/min (85 lb/hr)
- Flow Rate at OE 58 psi: 1040cc/min (100 lb/hr)
- Reference Pressure: 43.5 psi (3 Bar)
- OE Fuel Pressure: 58 psi (4 Bar)
- Impedance: High impedance / High-Z
- Injector Type: Saturated
- Fitment: Drop-in for size and plug
- Matching: Fuel Injector Clinic Data Match Technology
- ECU Data: Plug-and-play Dodge ECU data available from Fuel Injector Clinic
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Eight 1000cc/min high-impedance fuel injectors for Dodge Hemi Gen 1-4 Whipple Supercharger applications
- Flows 1000cc/min (85 lb/hr) at 43.5 psi (3 Bar)
- Flows 1040cc/min (100 lb/hr) at the OE 58 psi (4 Bar) fuel pressure
- Drop-in sizing and plug configuration for a straightforward installation
- Excellent injector linearity for predictable fuel delivery
- Strong short pulse width repeatability for precise low pulse width control
- Precisely matched using Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Includes a detailed Data Match Sheet with flow matching and latency information
- Plug-and-play Dodge ECU data available from Fuel Injector Clinic
- Flow tested at 43.5 psi (3 Bar) and 90 degrees F fuel temperature
- Tested using CF-16B calibration fluid
- Superior short pulse width control helps provide excellent tunability and drivability
- Includes O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against manufacturing defects
Built for Whipple-Supercharged Hemi Performance
A Whipple-supercharged Hemi can demand considerably more fuel as airflow and power increase, making injector capacity and control equally important. The is153-1000h-sc set provides 1040cc/min of flow at the Dodge OE 58 psi fuel pressure while retaining the linearity and short pulse width repeatability needed for accurate calibration. That combination gives tuners a capable fuel-delivery foundation for performance-oriented Whipple Hemi combinations without overlooking the drivability that matters away from wide-open throttle.
Data Matched for Consistent Fuel Delivery
Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the eight injectors as a set. Each injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet with detailed flow matching and latency information. This gives your tuner valuable injector data for calibration while helping deliver consistent fuel control across all eight cylinders.
Drop-In Installation and Dodge ECU Data
The is153-1000h-sc injector set is designed as a drop-in solution for both physical size and electrical plug in the specified Dodge Hemi Gen 1-4 Whipple Supercharger application. Fuel Injector Clinic also makes plug-and-play Dodge ECU data available to support proper calibration. If your vehicle uses an aftermarket fuel rail or another non-standard fuel system configuration, injector fitment should be confirmed before ordering.
Fitment
- Dodge Hemi Gen 1 Whipple Supercharger applications
- Dodge Hemi Gen 2 Whipple Supercharger applications
- Dodge Hemi Gen 3 Whipple Supercharger applications
- Dodge Hemi Gen 4 Whipple Supercharger applications
FAQs
What do the FIC is153-1000h-sc injectors flow at the Dodge OE fuel pressure?
At the OE 58 psi (4 Bar) fuel pressure, Fuel Injector Clinic rates the is153-1000h-sc injectors at 1040cc/min or 100 lb/hr. They are rated at 1000cc/min or 85 lb/hr at the standard 43.5 psi (3 Bar) reference pressure.
Are the FIC is153-1000h-sc injectors drop-in for Whipple-supercharged Dodge Hemi applications?
Yes. Fuel Injector Clinic specifies the is153-1000h-sc injectors as drop-in for both size and plug for the listed Dodge Hemi Gen 1-4 Whipple Supercharger application. Plug-and-play Dodge ECU data is also available from Fuel Injector Clinic to assist with calibration.
Upgrade Your Whipple Hemi Fuel System with Beefcake Racing
Putting together a Whipple-supercharged Hemi combination requires a fuel system capable of keeping up when boost and airflow climb. Beefcake Racing can help you select the right Fuel Injector Clinic injectors and supporting fuel system components for your performance goals. Call 1-855-827-7223 or email sales@beefcakeracing.com for expert assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
