Fuel Injector Clinic 775cc Fuel Injector Set - High Z (is146-0775h) - 1986.5-1992 Toyota Supra 7MGTE
Upgrade the fuel delivery on your 1986.5-1992 Toyota Supra Turbo 7MGTE with the Fuel Injector Clinic 775cc High-Z Fuel Injector Set. Designed to fit the OEM fuel rail, the is146-0775h includes six 775cc high-impedance Ball and Seat injectors engineered for excellent linearity and short pulse width repeatability. For modified MK3 Supra builds that demand more fuel capacity without sacrificing precise control, this matched injector set delivers the consistent fueling and predictable response tuners need to build a powerful, responsive, and street-friendly 7MGTE combination.
Fuel Injector Clinic precisely matches the is146-0775h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. The set includes PGTUSC6 pigtails, with optional PADPUtoD6 plug-and-play adapters available for installation without cutting or soldering the injector wiring. The injectors include the O-rings required for the listed factory application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is146-0775h
- Flow Rate: 775cc/min
- Application: Toyota Supra Turbo 7MGTE
- Fuel Rail Fitment: Fits OEM fuel rail
- Injector Type: High Impedance / High-Z
- Injector Design: Ball and Seat
- Quantity: Set of 6 injectors
- Flow Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Injector Identification: Individually serial numbered
- Included Data: Data Match Sheet with flow matching and latency information
- Included Wiring: PGTUSC6 pigtails
- Optional Wiring: PADPUtoD6 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 775cc/min flow capacity for modified Toyota Supra Turbo 7MGTE applications
- Six-injector set designed to fit the OEM fuel rail
- High-impedance Ball and Seat injector design
- Excellent linearity for consistent fuel delivery throughout the injector operating range
- Strong short pulse width repeatability for precise low-pulse-width fueling
- Superior short pulse width control helps provide excellent drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered for identification and data tracking
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- State-of-the-art matching helps provide predictable injector performance for accurate tuning
- Includes PGTUSC6 pigtails
- Optional PADPUtoD6 plug-and-play adapters eliminate the need to cut and solder the injector wiring
- Includes O-rings required for the listed factory application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Matched for Precise Fuel Control
Accurate injector behavior is critical when tuning a modified 7MGTE. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors in the is146-0775h set, with every injector individually serial numbered and detailed flow matching and latency information supplied on the included Data Match Sheet. Combined with excellent linearity and short pulse width repeatability, this provides predictable injector performance from low-load operation through higher fuel demand for accurate calibration and excellent drivability.
Wiring Options
The is146-0775h injector set includes PGTUSC6 pigtails for the injector plug conversion. For an installation without cutting or soldering the injector wiring, optional PADPUtoD6 plug-and-play adapters can be used to connect the injectors to the stock harness.
Fitment
- 1986.5 Toyota Supra Turbo 7MGTE
- 1987 Toyota Supra Turbo 7MGTE
- 1988 Toyota Supra Turbo 7MGTE
- 1989 Toyota Supra Turbo 7MGTE
- 1990 Toyota Supra Turbo 7MGTE
- 1991 Toyota Supra Turbo 7MGTE
- 1992 Toyota Supra Turbo 7MGTE
Fitment Note: The is146-0775h injector set is designed to fit the OEM fuel rail on the listed Toyota Supra Turbo 7MGTE applications. If your Supra uses an aftermarket fuel rail, modified fuel system, or another non-standard configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Does the Fuel Injector Clinic is146-0775h injector set fit the OEM 7MGTE fuel rail?
Yes. The is146-0775h is designed as a six-injector set for the OEM fuel rail on the Toyota Supra Turbo 7MGTE. The injectors also include the O-rings required for the listed factory application.
What wiring options are available for the is146-0775h injector set?
The set includes PGTUSC6 pigtails for the injector plug conversion. Optional PADPUtoD6 plug-and-play adapters are available for owners who want to connect the injectors to the stock harness without cutting or soldering the injector wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you match your 7MGTE fuel system to your horsepower goals and overall performance combination. If you have questions about the Fuel Injector Clinic is146-0775h injector set, injector sizing, wiring adapters, OEM fuel rail fitment, or an aftermarket fuel-system configuration, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
