Fuel Injector Clinic 525cc Fuel Injector Set - High Z (is145-0525h) - 1993-1998 Toyota Supra 2JZ-GTE
Upgrade the fuel system in your 2JZ-GTE with the Fuel Injector Clinic 525cc High-Z Fuel Injector Set for 1993-1998 Toyota Supra applications. Designed for a top-feed injector setup, this six-injector set uses 525cc saturated, high-impedance Ball and Seat injectors engineered for excellent linearity and short pulse width repeatability. For a modified Supra that needs more capable, precisely matched injectors without stepping into the much larger flow rates required by extreme-horsepower combinations, the is145-0525h delivers the control, consistency, and drivability needed for a properly tuned performance setup.
Fuel Injector Clinic precisely flow matches each set to within 1 percent, individually numbers the injectors, and supplies the results for each injector on a detailed flow sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. Tight manufacturing tolerances and superior short pulse width control help provide predictable tuning and excellent drivability. The set includes PGTUSC6 solder-in pigtails and the O-rings required for the listed application, while optional PADPUtoD6 plug-and-play adapters provide an alternative that does not require cutting or soldering the injector wiring.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is145-0525h
- Flow Rate: 525cc/min
- Application: Toyota Supra 2JZ-GTE top-feed injector setup
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and Seat
- Quantity: Set of 6 injectors
- Flow Matching: Precisely flow matched to within 1 percent
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Injector Identification: Individually numbered
- Included Data: Detailed flow sheet with results for each injector
- Included Wiring: PGTUSC6 solder-in pigtails
- Optional Wiring: PADPUtoD6 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 525cc/min flow capacity for modified Toyota Supra 2JZ-GTE applications
- Six-injector set designed for 2JZ-GTE top-feed configurations
- Saturated, high-impedance Ball and Seat injector design
- Excellent linearity for consistent fuel delivery across the injector operating range
- Strong short pulse width repeatability for precise low-pulse-width fueling
- Superior short pulse width control helps provide excellent drivability
- Injector sets precisely flow matched to within 1 percent
- Each injector is individually numbered for identification and matching
- Detailed flow sheet provides individual injector test results
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- Tight manufacturing tolerances help provide predictable injector performance and easier tuning
- Includes PGTUSC6 pigtails for the required injector plug conversion
- Optional PADPUtoD6 plug-and-play adapters eliminate the need to cut and solder the injector wiring
- Includes O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Wiring Requirements
The is145-0525h injector set requires an injector plug conversion. Fuel Injector Clinic includes PGTUSC6 pigtails that can be soldered into the vehicle's wiring harness to replace the existing injector plugs. For an installation without cutting or soldering the injector wiring, optional PADPUtoD6 plug-and-play adapters can be purchased to connect the injectors to the existing harness.
This plug conversion allows Fuel Injector Clinic to provide brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors, helping avoid the additional potential for failure associated with previously used injector cores.
Fitment
- 1993 Toyota Supra 2JZ-GTE
- 1994 Toyota Supra 2JZ-GTE
- 1995 Toyota Supra 2JZ-GTE
- 1996 Toyota Supra 2JZ-GTE
- 1997 Toyota Supra 2JZ-GTE
- 1998 Toyota Supra 2JZ-GTE
Fitment Note: This injector set is intended for Toyota Supra 2JZ-GTE top-feed injector applications. If your Supra uses an aftermarket fuel rail, modified fuel system, or another non-standard configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
How are Fuel Injector Clinic is145-0525h injectors matched?
Fuel Injector Clinic precisely flow matches these high-performance injector sets to within 1 percent. Each injector in the set is individually numbered, and its results are recorded on the detailed flow sheet included with the injectors.
Do the is145-0525h injectors require changing the injector plugs?
Yes. Fuel Injector Clinic includes PGTUSC6 solder-in pigtails for the required plug conversion. Optional PADPUtoD6 plug-and-play adapters are available if you prefer to connect the injectors without cutting or soldering the injector wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you match your 2JZ-GTE fuel system to your performance goals and overall combination. If you have questions about the Fuel Injector Clinic is145-0525h injector set, injector sizing, wiring adapters, or compatibility with an aftermarket fuel-system setup, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
