Fuel Injector Clinic 2150cc Fuel Injector Set - High Z (is144-2150h) - 2013-2016 Scion FR-S
Feed a serious 2013-2016 Scion FR-S build with the massive fuel capacity of the Fuel Injector Clinic is144-2150h 2150cc High-Z fuel injector set. This complete set of four saturated, high-impedance injectors is engineered for extreme fuel demand while retaining the low-pulse control needed for surprisingly manageable idle and part-throttle operation. Fuel Injector Clinic uses dynamic Data Match Technology specifically to improve control of these large injectors in the sub-2ms pulse width range, giving tuners the precision needed to make 2150cc injectors work across far more than just wide-open throttle.
The is144-2150h features drop-in plug fitment for the listed application and includes the O-rings required for factory installation. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. Fuel Injector Clinic flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. These injectors are well suited to high-volume fuel applications such as E85, but they must not be used with VP Import, Q16, or other MTBE oxygenated fuels.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is144-2150h
- Application: Scion FR-S
- Injector Flow Rate: 2150cc/min
- Injector Quantity: 4
- Injector Type: Saturated / high impedance
- Impedance: High-Z / high impedance
- Fitment Type: Drop-in plug fit
- Matching Technology: Fuel Injector Clinic Data Match Technology with dynamic flow matching
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- MTBE Fuel Compatibility: Not compatible with VP Import, Q16, or other MTBE oxygenated fuels
- Alcohol-Based Fuel Use: Follow Fuel Injector Clinic care instructions when using E85 or other alcohol-based fuels
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of four massive 2150cc/min performance fuel injectors
- Saturated, high-impedance injector design
- Designed for extreme fuel-volume requirements
- Excellent choice for properly configured E85 and other compatible high-volume fuel applications
- Dynamic Data Match Technology helps improve ECU control at very short pulse widths
- Optimized control in the sub-2ms pulse width range commonly encountered during idle and part-throttle operation
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides flow matching and latency information
- Superior short pulse width control supports accurate tuning and strong drivability
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Drop-in plug fit for the listed application
- Includes O-rings required for the listed factory application
- Lifetime warranty against failure caused by defects in original manufacture
- Must not be used with VP Import, Q16, or other MTBE oxygenated fuels
Massive Fuel Capacity With Low-Pulse Control
A 2150cc injector can deliver enormous fuel volume, but maximum flow alone does not make an injector easy to tune. The challenge is maintaining accurate control when the engine needs only a fraction of that capacity. Fuel Injector Clinic addresses this with dynamic flow matching during production of the is144-2150h set. This significantly improves the ECU's ability to control these injectors in the sub-2ms pulse width range typically encountered during idle and part-throttle operation.
That combination of massive fuel capacity and carefully controlled low-pulse operation makes the is144-2150h an excellent option for extreme FR-S builds where smaller injectors no longer provide the required fueling headroom. Proper ECU calibration is essential, but FIC provides the injector matching and data needed to give the tuner a solid starting point.
Data Match Technology
Fuel Injector Clinic uses its proprietary Data Match Technology with dynamic flow matching during production of these 2150cc injector sets. Every injector is individually serial numbered, and the results are documented on the supplied Data Match Sheet with detailed flow matching and latency information. This gives the tuner valuable injector data while helping promote consistent fuel delivery across all four cylinders.
Critical Fuel Compatibility Warning
Do not use the is144-2150h with VP Import, Q16, or other MTBE oxygenated fuels. The internal construction of the 2150cc/min injector contains a seal that has been found to swell when exposed to MTBE. This swelling can significantly reduce injector flow, making the injector unsuitable for MTBE oxygenated fuels.
When using alcohol-based fuels such as E85, Fuel Injector Clinic's injector care instructions should also be followed carefully. Prolonged disuse while the injectors remain exposed to alcohol-based fuel can create potential corrosion issues. Proper fuel-system care is especially important when a vehicle will be stored or left unused for extended periods.
Drop-In Plug Fitment
Unlike several smaller injector options for this application that require pigtails or plug-and-play wiring adapters, the is144-2150h features drop-in plug fitment for the listed FR-S application. The injectors are also supplied with the O-rings needed for the factory application. If your FR-S uses an aftermarket fuel rail, modified fuel system, or another unusual configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
Fitment
- 2013 Scion FR-S
- 2014 Scion FR-S
- 2015 Scion FR-S
- 2016 Scion FR-S
FAQs
Can Fuel Injector Clinic is144-2150h injectors be used with E85?
Yes. These 2150cc injectors can be used for E85 and other compatible high-volume fuel applications. However, Fuel Injector Clinic warns that proper care procedures should be followed because prolonged disuse while exposed to alcohol-based fuels can create potential corrosion issues.
Can I run Q16 or VP Import with the is144-2150h injectors?
No. Do not use these injectors with Q16, VP Import, or other MTBE oxygenated fuels. MTBE can cause an internal seal in the 2150cc injector to swell, which can significantly reduce injector flow.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and the supporting fuel system components needed for serious performance builds. When you are stepping up to an injector as large as the 2150cc is144-2150h, matching the fuel system and injector capacity to the engine combination, fuel, and power goals becomes especially important. Our team can help you make sure the components going into your FR-S work together properly. Questions about the Fuel Injector Clinic is144-2150h? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
