Fuel Injector Clinic 1650cc Fuel Injector Set - High Z (is144-1650h) - 2013-2016 Scion FR-S
Step up the fueling capacity of your 2013-2016 Scion FR-S with the Fuel Injector Clinic is144-1650h 1650cc High-Z fuel injector set. Built for serious street, race, forced-induction, E85, and high-horsepower combinations, this complete set of four saturated, high-impedance ball and seat injectors delivers substantial fuel volume without sacrificing the low-pulse control needed for excellent drivability. Fuel Injector Clinic combines its 1650cc/min flow capacity with precise Data Match Technology to give tuners consistent, predictable injector performance across a wide operating range.
The 1650cc High-Z injector uses stainless alloy valve construction and is compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each injector is individually serial numbered and matched using Fuel Injector Clinic's proprietary Data Match Technology, with detailed flow matching and latency information supplied on the included Data Match Sheet. PGTJETR4Q solder-in pigtails are included, while optional PADPJtoD4 plug-and-play adapters provide an installation option that does not require cutting or soldering the factory harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is144-1650h
- Application: Scion FR-S
- Injector Flow Rate: 1650cc/min
- Injector Quantity: 4
- Injector Type: Saturated / high impedance ball and seat
- Impedance: High-Z / high impedance
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Included Pigtails: PGTJETR4Q
- Optional Plug-and-Play Adapters: PADPJtoD4
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of four 1650cc/min performance fuel injectors
- Saturated, high-impedance ball and seat injector design
- High fuel capacity for demanding high-horsepower applications
- Excellent idle performance for street-driven performance vehicles
- Suitable for both E85 and gasoline performance builds
- Stainless alloy valve construction provides broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Data Match Sheet provides detailed flow matching and latency information
- Superior short pulse width control supports easier tuning and excellent drivability
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes PGTJETR4Q solder-in pigtails
- Optional PADPJtoD4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Includes O-rings required for the listed factory application
- Lifetime warranty against failure caused by defects in original manufacture
Big Fuel Capacity Without Giving Up Street Manners
Fuel Injector Clinic's 1650cc/min High-Z injector is designed for combinations that demand serious fuel volume while still requiring precise operation at idle and part throttle. Its excellent idle characteristics and superior short pulse width control help make the is144-1650h a strong choice for powerful FR-S builds that still spend time on the street. For properly tuned forced-induction and high-horsepower combinations, that balance between fuel capacity and controllability can be just as important as maximum injector flow.
Data Match Technology
Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors within each set. Every injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet with detailed flow matching and latency information. This gives your tuner accurate injector data to work with while promoting consistent fuel delivery across all four cylinders.
Broad Fuel Compatibility
The stainless alloy valve construction of the FIC 1650cc High-Z injector allows it to work with a wide range of fuels. Fuel Injector Clinic specifies compatibility with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels, making the is144-1650h especially versatile for FR-S builds where fuel choice and future performance upgrades are important considerations.
Injector Plug Conversion
The is144-1650h requires an injector connector conversion when used with the factory wiring harness. Fuel Injector Clinic includes PGTJETR4Q solder-in pigtails that can replace the original injector connectors. If you prefer not to cut or solder the factory harness, optional PADPJtoD4 plug-and-play adapters can be used instead.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The set is also supplied with the O-rings needed for the listed factory application. If your FR-S uses an aftermarket fuel system or another unusual configuration, contact Beefcake Racing before ordering to confirm the proper injector setup.
Fitment
- 2013 Scion FR-S
- 2014 Scion FR-S
- 2015 Scion FR-S
- 2016 Scion FR-S
FAQs
What fuels can I run with the Fuel Injector Clinic is144-1650h injectors?
Fuel Injector Clinic specifies the 1650cc High-Z injector as compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Its stainless alloy valve construction provides the broad fuel compatibility needed for serious street and race applications.
Do the is144-1650h injectors require modification to the FR-S wiring harness?
The included PGTJETR4Q pigtails require the factory injector connectors to be replaced. Optional PADPJtoD4 plug-and-play adapters can instead connect the injectors to the factory harness without cutting or soldering.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and the supporting fuel system components needed to build a properly matched performance combination. Whether your FR-S is being built for E85, forced induction, serious street power, or competition use, our team can help you select the right injectors and installation components for your setup. Questions about the Fuel Injector Clinic is144-1650h? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
