Fuel Injector Clinic 1200cc Fuel Injector Set - High Z (is144-1200h) - 2013-2016 Scion FR-S
Give your 2013-2016 Scion FR-S the fuel capacity needed for serious performance with the Fuel Injector Clinic is144-1200h 1200cc High-Z fuel injector set. Designed as a substantial fueling upgrade for modified and high-horsepower applications, this complete set of four saturated, high-impedance ball and seat injectors is an excellent choice for builds running E85. FIC combines high flow capacity with superior short pulse width control and precise injector matching to deliver the consistent fueling and drivability a properly tuned performance car demands.
The is144-1200h replaces the previous is144-1100H part number and features Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered, with matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. PGTJETR4Q solder-in pigtails are included, or optional PADPJtoD4 plug-and-play adapters can be used to connect the injectors without cutting or soldering the factory wiring harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is144-1200h
- Previous Part Number: is144-1100H
- Application: Scion FR-S
- Injector Flow Rate: 1200cc/min
- Injector Quantity: 4
- Injector Type: Saturated / high impedance ball and seat
- Impedance: High-Z / high impedance
- Fuel Application: Excellent for E85 applications
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Included Pigtails: PGTJETR4Q
- Optional Plug-and-Play Adapters: PADPJtoD4
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- O-Rings: Included for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of four 1200cc/min performance fuel injectors
- Saturated, high-impedance ball and seat injector construction
- Excellent choice for E85 performance applications
- Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Data Match Sheet provides detailed matching and latency information
- Superior short pulse width control supports easier tuning and excellent drivability
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid
- Includes PGTJETR4Q solder-in pigtails
- Optional PADPJtoD4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Brand-new, unused injectors rather than remanufactured or core-program injectors
- Includes O-rings required for the listed factory application
- Lifetime warranty against failure caused by defects in original manufacture
High-Flow Fueling With Precise Low-Pulse Control
High injector flow is only part of what matters on a serious performance build. The ECU still needs predictable injector behavior at low pulse widths to maintain good drivability away from wide-open throttle. Fuel Injector Clinic combines the 1200cc/min capacity of the is144-1200h with superior short pulse width control and precise matching, helping tuners maintain accurate fuel delivery across a broad operating range. That makes this set well suited to an FR-S that needs significantly more fuel without treating street manners as an afterthought.
Data Match Technology
Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors within each set. Every injector is individually serial numbered, and the results are supplied on the included Data Match Sheet with detailed flow matching and latency information. Accurate injector data gives the tuner better information to work with and helps promote consistent fueling from cylinder to cylinder.
Injector Plug Conversion
The is144-1200h requires an injector connector conversion when used with the factory wiring harness. Fuel Injector Clinic includes PGTJETR4Q solder-in pigtails that can replace the original injector connectors. For an installation that does not require cutting or soldering the factory harness, optional PADPJtoD4 plug-and-play adapters are available.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The set is also configured with the O-rings required for the listed factory application. If your FR-S uses an aftermarket fuel system or another unusual configuration, contact Beefcake Racing before ordering to verify the correct injector setup.
Fitment
- 2013 Scion FR-S
- 2014 Scion FR-S
- 2015 Scion FR-S
- 2016 Scion FR-S
FAQs
Is the Fuel Injector Clinic is144-1200h a good choice for an E85 Scion FR-S?
Yes. Fuel Injector Clinic specifically identifies this 1200cc injector set as a great option for E85 applications. Proper injector sizing and ECU calibration should always be based on the specific engine, fuel, power level, fuel pressure, and overall combination.
Does the is144-1200h require modifying the factory injector wiring?
The included PGTJETR4Q pigtails require the factory injector connectors to be replaced by soldering in the supplied pigtails. Optional PADPJtoD4 plug-and-play adapters can instead connect the injectors to the factory harness without cutting or soldering.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and the supporting performance fuel system components needed to build a properly matched combination. Whether you are upgrading your FR-S for E85, forced induction, or another high-fuel-demand setup, our team can help you select the right injectors and installation components for your build. Questions about the Fuel Injector Clinic is144-1200h? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
