Fuel Injector Clinic 2150cc Fuel Injector Set - High Z (is141-2150h) - 2005-2015 Toyota Tacoma 1GR-FE
Take the fuel system on your 2005-2015 Toyota Tacoma 1GR-FE to serious performance levels with the Fuel Injector Clinic 2150cc High-Z Fuel Injector Set. The is141-2150h includes six massive 2150cc saturated, high-impedance injectors designed for high-output 4.0L 1GR-FE combinations that demand substantial fuel delivery. Despite their enormous flow capacity, FIC engineers these injectors with precise matching and superior short pulse width control to give tuners the consistency needed for accurate calibration and strong drivability.
Fuel Injector Clinic precisely matches the is141-2150h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. The set includes PGTDEN6 pigtails, with optional PADPDtoT6 plug-and-play adapters available as an alternative wiring solution. The injectors include the O-rings required for the listed factory application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is141-2150h
- Flow Rate: 2150cc/min
- Application: Toyota Tacoma 1GR-FE
- Engine: 4.0L 1GR-FE V6
- Injector Type: Saturated / High Impedance / High-Z
- Quantity: Set of 6 injectors
- Flow Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Injector Identification: Individually serial numbered
- Included Data: Data Match Sheet with flow matching and latency information
- Included Wiring: PGTDEN6 pigtails
- Optional Wiring: PADPDtoT6 plug-and-play adapters
- Fuel Restriction: Do not use with VP Import, Q16, or other MTBE oxygenated fuels
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Massive 2150cc/min flow capacity for high-output Toyota Tacoma 1GR-FE builds
- Complete six-injector set for the 4.0L 1GR-FE V6
- Saturated, high-impedance injector design
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Superior short pulse width control helps maintain excellent drivability
- Each injector is individually serial numbered for identification and data tracking
- Detailed Data Match Sheet provides flow matching and latency information for tuning
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- State-of-the-art matching helps provide predictable injector performance for accurate calibration
- Includes PGTDEN6 pigtails
- Optional PADPDtoT6 plug-and-play adapters provide an alternative to installing the included pigtails
- Includes O-rings required for the listed factory application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Massive Flow with Precise Injector Control
A 2150cc injector delivers enormous fuel capacity, but high flow alone is not enough for a properly tuned performance engine. Fuel Injector Clinic uses Data Match Technology to precisely match the injectors in the is141-2150h set, while superior short pulse width control helps the ECU accurately manage fuel delivery during lower-load operation. Each injector is individually serial numbered, and its flow matching and latency information is supplied on the included Data Match Sheet, giving tuners the consistency and injector data needed to calibrate demanding 1GR-FE combinations.
Important Fuel Compatibility Information
Do not use the is141-2150h injectors with VP Import, Q16, or other MTBE oxygenated fuels. The internal construction of FIC's 2150cc/min injector includes a seal that can swell when exposed to MTBE. This swelling can significantly reduce injector flow, making the 2150cc injector unsuitable for MTBE oxygenated fuels.
When using alcohol-based fuels such as E85, follow Fuel Injector Clinic's injector care recommendations, particularly when the vehicle will remain unused for an extended period. Proper fuel-system maintenance helps address potential corrosion concerns associated with prolonged disuse while injectors remain exposed to alcohol-based fuel.
Fitment
- 2005 Toyota Tacoma 4.0L 1GR-FE V6
- 2006 Toyota Tacoma 4.0L 1GR-FE V6
- 2007 Toyota Tacoma 4.0L 1GR-FE V6
- 2008 Toyota Tacoma 4.0L 1GR-FE V6
- 2009 Toyota Tacoma 4.0L 1GR-FE V6
- 2010 Toyota Tacoma 4.0L 1GR-FE V6
- 2011 Toyota Tacoma 4.0L 1GR-FE V6
- 2012 Toyota Tacoma 4.0L 1GR-FE V6
- 2013 Toyota Tacoma 4.0L 1GR-FE V6
- 2014 Toyota Tacoma 4.0L 1GR-FE V6
- 2015 Toyota Tacoma 4.0L 1GR-FE V6
Fitment Note: The is141-2150h injector set is designed for the listed Toyota Tacoma 4.0L 1GR-FE applications. If your Tacoma uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Can Fuel Injector Clinic is141-2150h injectors be used with Q16 or VP Import?
No. Fuel Injector Clinic specifically states that its 2150cc injectors must not be used with VP Import, Q16, or other MTBE oxygenated fuels. MTBE can cause an internal injector seal to swell and significantly reduce injector flow.
What wiring options are available for the is141-2150h injector set?
The set includes PGTDEN6 pigtails. Optional PADPDtoT6 plug-and-play adapters are available as an alternative wiring solution for connecting the injectors to the factory harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you match your Tacoma's injectors and supporting fuel-system components to your horsepower goals, fuel choice, and overall performance combination. If you have questions about the Fuel Injector Clinic is141-2150h injector set, injector sizing, fuel compatibility, wiring adapters, or fuel-system fitment, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
