Fuel Injector Clinic 1650cc Fuel Injector Set - High Z (is141-1650h) - 2005-2015 Toyota Tacoma 1GR-FE
Build your 2005-2015 Toyota Tacoma 1GR-FE fuel system for serious horsepower with the Fuel Injector Clinic 1650cc High-Z Fuel Injector Set. The is141-1650h includes six 1650cc high-impedance injectors that deliver substantial fuel capacity while retaining the precise control needed for excellent idle quality and drivability. Fuel Injector Clinic identifies its 1650cc injector as the largest high-impedance offering in its lineup that is compatible with all race fuels, making this set an outstanding choice for high-output 4.0L 1GR-FE builds running E85, gasoline, or compatible race fuels.
Fuel Injector Clinic precisely matches the is141-1650h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration. FIC flow tests and rates its injectors at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. Stainless-alloy valve construction provides broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. The set includes pigtails for the required injector plug conversion, with optional PADPJtoT6 plug-and-play adapters available for installation without cutting or soldering the factory harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is141-1650h
- Flow Rate: 1650cc/min
- Application: Toyota Tacoma 1GR-FE
- Engine: 4.0L 1GR-FE V6
- Injector Type: High Impedance / High-Z
- Quantity: Set of 6 injectors
- Valve Construction: Stainless alloy
- Flow Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Injector Identification: Individually serial numbered
- Included Data: Data Match Sheet with flow matching and latency information
- Optional Wiring: PADPJtoT6 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 1650cc/min flow capacity for high-horsepower Toyota Tacoma 1GR-FE builds
- Complete six-injector set for the 4.0L 1GR-FE V6
- High-impedance injector design
- Stainless-alloy valve construction for broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Excellent idle performance for street-driven performance applications
- Superior short pulse width control helps provide excellent drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered for identification and data tracking
- Detailed Data Match Sheet provides flow matching and latency information for tuning
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- Optional PADPJtoT6 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Includes O-rings required for the listed factory application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Serious Fuel Capacity with Street-Friendly Control
Fuel Injector Clinic's 1650cc high-impedance injector is engineered to deliver the fuel capacity required by demanding high-horsepower combinations while retaining excellent idle performance in street-driven vehicles. Superior short pulse width control and precise Data Match Technology help maintain predictable fuel delivery at lower engine loads, giving tuners the control needed to combine substantial injector capacity with strong drivability.
Broad Fuel Compatibility
The stainless-alloy valve construction of FIC's 1650cc high-impedance injector allows it to be used with a wide range of fuels. It is compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels, giving Tacoma builders flexibility when configuring a 1GR-FE for street performance, competition use, or a combination of both.
Wiring Options
This injector set requires an injector plug conversion. The included pigtails can be soldered into the vehicle wiring harness to replace the existing injector plugs. Optional PADPJtoT6 plug-and-play adapters provide an alternative that connects the injectors to the factory harness without cutting or soldering.
Fitment
- 2005 Toyota Tacoma 4.0L 1GR-FE V6
- 2006 Toyota Tacoma 4.0L 1GR-FE V6
- 2007 Toyota Tacoma 4.0L 1GR-FE V6
- 2008 Toyota Tacoma 4.0L 1GR-FE V6
- 2009 Toyota Tacoma 4.0L 1GR-FE V6
- 2010 Toyota Tacoma 4.0L 1GR-FE V6
- 2011 Toyota Tacoma 4.0L 1GR-FE V6
- 2012 Toyota Tacoma 4.0L 1GR-FE V6
- 2013 Toyota Tacoma 4.0L 1GR-FE V6
- 2014 Toyota Tacoma 4.0L 1GR-FE V6
- 2015 Toyota Tacoma 4.0L 1GR-FE V6
Fitment Note: The is141-1650h injector set is designed for the listed Toyota Tacoma 4.0L 1GR-FE applications. If your Tacoma uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
What fuels can Fuel Injector Clinic is141-1650h injectors be used with?
FIC's 1650cc high-impedance injector uses stainless-alloy valve construction and is compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels.
Does the is141-1650h injector set require a wiring change?
Yes. This injector set requires an injector plug conversion. The included pigtails can be soldered into the harness, or optional PADPJtoT6 plug-and-play adapters can be used to avoid cutting and soldering the factory wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you match your Tacoma's injectors and supporting fuel-system components to your horsepower goals, fuel choice, and overall performance combination. If you have questions about the Fuel Injector Clinic is141-1650h injector set, injector sizing, E85 or race-fuel compatibility, wiring adapters, or fuel-system fitment, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
