Fuel Injector Clinic 1440cc Fuel Injector Set - High Z (is141-1440h) - 2005-2015 Toyota Tacoma 1GR-FE
Give your 2005-2015 Toyota Tacoma 1GR-FE the fuel capacity needed for a serious performance build with the Fuel Injector Clinic 1440cc High-Z Fuel Injector Set. The is141-1440h includes six 1440cc high-impedance injectors that combine substantial fuel delivery with the precise control needed for excellent idle quality, drivability, and accurate tuning. Positioned between FIC's 1200cc and 1650cc offerings, this set is an excellent choice for high-horsepower 4.0L 1GR-FE builds running E85, gasoline, or compatible race fuels.
Fuel Injector Clinic precisely matches the is141-1440h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. Stainless-alloy valve construction provides broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. The set includes PGTUSC6 pigtails, with optional PADPUtoT6 plug-and-play adapters available for installation without cutting or soldering the injector wiring.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is141-1440h
- Flow Rate: 1440cc/min
- Application: Toyota Tacoma 1GR-FE
- Engine: 4.0L 1GR-FE V6
- Injector Type: High Impedance / High-Z
- Quantity: Set of 6 injectors
- Valve Construction: Stainless alloy
- Flow Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Injector Identification: Individually serial numbered
- Included Data: Data Match Sheet with flow matching and latency information
- Included Wiring: PGTUSC6 pigtails
- Optional Wiring: PADPUtoT6 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 1440cc/min flow capacity for high-horsepower Toyota Tacoma 1GR-FE builds
- Complete six-injector set for the 4.0L 1GR-FE V6
- High-impedance injector design
- Stainless-alloy valve construction for broad fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Excellent idle performance for street-driven performance vehicles
- Superior short pulse width control helps provide excellent drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered for identification and data tracking
- Detailed Data Match Sheet provides flow matching and latency information for tuning
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 pigtails
- Optional PADPUtoT6 plug-and-play adapters eliminate the need to cut or solder the injector wiring
- Includes O-rings required for the listed factory application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
High Flow Without Sacrificing Street Drivability
The 1440cc injector fills the gap between FIC's 1200cc and 1650cc offerings, providing serious fuel capacity while retaining excellent idle performance in street-driven vehicles. Superior short pulse width control and precise Data Match Technology help tuners maintain predictable fuel delivery at lower engine loads while providing the capacity needed for significantly higher horsepower output on both E85 and gasoline.
Broad Fuel Compatibility
The stainless-alloy valve construction of FIC's 1440cc high-impedance injector allows it to be used with a broad range of fuels. Compatible options include pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels, giving builders greater flexibility when configuring a Tacoma for street use, competition, or a combination of both.
Wiring Options
The is141-1440h injector set includes PGTUSC6 pigtails for the required injector plug conversion. The pigtails can be soldered into the vehicle wiring harness to replace the existing injector plugs. For an installation without cutting or soldering the harness, optional PADPUtoT6 plug-and-play adapters can be used to connect the injectors to the factory wiring.
Fitment
- 2005 Toyota Tacoma 4.0L 1GR-FE V6
- 2006 Toyota Tacoma 4.0L 1GR-FE V6
- 2007 Toyota Tacoma 4.0L 1GR-FE V6
- 2008 Toyota Tacoma 4.0L 1GR-FE V6
- 2009 Toyota Tacoma 4.0L 1GR-FE V6
- 2010 Toyota Tacoma 4.0L 1GR-FE V6
- 2011 Toyota Tacoma 4.0L 1GR-FE V6
- 2012 Toyota Tacoma 4.0L 1GR-FE V6
- 2013 Toyota Tacoma 4.0L 1GR-FE V6
- 2014 Toyota Tacoma 4.0L 1GR-FE V6
- 2015 Toyota Tacoma 4.0L 1GR-FE V6
Fitment Note: The is141-1440h injector set is designed for the listed Toyota Tacoma 4.0L 1GR-FE applications. If your Tacoma uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
What fuels can Fuel Injector Clinic is141-1440h injectors be used with?
The 1440cc high-impedance injectors use stainless-alloy valve construction and are compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels.
What wiring is included with the is141-1440h injector set?
The current Fuel Injector Clinic configuration includes PGTUSC6 pigtails. Optional PADPUtoT6 plug-and-play adapters are available for connecting the injectors to the factory harness without cutting or soldering the injector wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you match your Tacoma's injectors and supporting fuel-system components to your horsepower goals, fuel choice, and overall performance combination. If you have questions about the Fuel Injector Clinic is141-1440h injector set, injector sizing, E85 or race-fuel compatibility, wiring adapters, or fuel-system fitment, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
