Fuel Injector Clinic 1200cc Fuel Injector Set - High Z (is141-1200h) - 2005-2015 Toyota Tacoma 1GR-FE
Upgrade the fuel system on your 2005-2015 Toyota Tacoma 1GR-FE with the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. The is141-1200h includes six 1200cc injectors engineered for modified 4.0L 1GR-FE combinations that demand significantly greater fuel delivery while maintaining the precise injector control needed for excellent drivability. Fuel Injector Clinic specifically identifies this set as a great choice for E85 applications, making it a strong option for performance Tacoma builds that have outgrown smaller injectors.
Fuel Injector Clinic precisely matches the is141-1200h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. The current FIC configuration includes PGTJETR6Q solder-in pigtails, with optional PADPJTOT6 plug-and-play adapters available as an alternative wiring solution. All O-rings required for the listed factory application are included, and every injector is backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is141-1200h
- Flow Rate: 1200cc/min
- Application: Toyota Tacoma 1GR-FE
- Engine: 4.0L 1GR-FE V6
- Injector Type: High Impedance / High-Z
- Quantity: Set of 6 injectors
- Flow Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- E85: Identified by FIC as a great option for E85 applications
- Injector Identification: Individually serial numbered
- Included Data: Data Match Sheet with flow matching and latency information
- Included Wiring: PGTJETR6Q solder-in pigtails
- Optional Wiring: PADPJTOT6 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 1200cc/min flow capacity for high-performance Toyota Tacoma 1GR-FE applications
- Complete six-injector set for the 4.0L 1GR-FE V6
- High-impedance injector design
- Great choice for E85 applications
- Superior short pulse width control helps provide excellent drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered for identification and data tracking
- Detailed Data Match Sheet provides flow matching and latency information for accurate tuning
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- State-of-the-art matching helps provide predictable injector performance across the operating range
- Includes PGTJETR6Q solder-in pigtails
- Optional PADPJTOT6 plug-and-play adapters provide an alternative to modifying the factory injector wiring
- Includes O-rings required for the listed factory application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
1200cc Fuel Delivery with Precise Control
Increasing injector capacity is only part of building a properly functioning high-performance fuel system. Fuel Injector Clinic's Data Match Technology precisely matches the injectors in the is141-1200h set, while superior short pulse width control helps provide predictable fuel delivery during idle, part-throttle, and other lower-load operating conditions. The result is serious 1200cc/min fuel capacity backed by the consistency and injector data tuners need to properly calibrate a modified 1GR-FE.
Built for Performance and E85 Applications
Fuel Injector Clinic specifically identifies this 1200cc injector set as a great choice for E85 applications. With substantially greater fuel capacity than smaller injector upgrades, the is141-1200h is designed for Tacoma owners building more demanding performance combinations where adequate fuel delivery, accurate calibration, and strong drivability all matter.
Wiring Options
The current is141-1200h configuration is available with PGTJETR6Q solder-in pigtails. For owners who prefer to avoid modifying the factory injector wiring, optional PADPJTOT6 plug-and-play adapters provide an alternative connection to the stock harness.
Fitment
- 2005 Toyota Tacoma 4.0L 1GR-FE V6
- 2006 Toyota Tacoma 4.0L 1GR-FE V6
- 2007 Toyota Tacoma 4.0L 1GR-FE V6
- 2008 Toyota Tacoma 4.0L 1GR-FE V6
- 2009 Toyota Tacoma 4.0L 1GR-FE V6
- 2010 Toyota Tacoma 4.0L 1GR-FE V6
- 2011 Toyota Tacoma 4.0L 1GR-FE V6
- 2012 Toyota Tacoma 4.0L 1GR-FE V6
- 2013 Toyota Tacoma 4.0L 1GR-FE V6
- 2014 Toyota Tacoma 4.0L 1GR-FE V6
- 2015 Toyota Tacoma 4.0L 1GR-FE V6
Fitment Note: The is141-1200h injector set is designed for the listed Toyota Tacoma 4.0L 1GR-FE applications. If your Tacoma uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Are Fuel Injector Clinic is141-1200h injectors suitable for E85?
Yes. Fuel Injector Clinic specifically identifies the is141-1200h 1200cc injector set as a great option for E85 applications. Proper ECU calibration and a fuel system configured to support the intended fuel and performance level are required.
What wiring options are available for the is141-1200h injector set?
Fuel Injector Clinic currently lists the set with PGTJETR6Q solder-in pigtails. Optional PADPJTOT6 plug-and-play adapters are available for connecting the injectors to the stock harness without installing the solder-in pigtails.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you match your Tacoma's injectors and supporting fuel-system components to your horsepower goals, fuel choice, and overall performance combination. If you have questions about the Fuel Injector Clinic is141-1200h injector set, injector sizing, E85 applications, wiring adapters, or fuel-system compatibility, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
