Fuel Injector Clinic 525cc Fuel Injector Set - High Z (is141-0525h) - 2005-2015 Toyota Tacoma 1GR-FE
Upgrade the fuel delivery on your 2005-2015 Toyota Tacoma 1GR-FE with the Fuel Injector Clinic 525cc High-Z Fuel Injector Set. The is141-0525h includes six 525cc injectors engineered to provide the additional fuel capacity and precise control needed for modified 4.0L Tacoma applications. Fuel Injector Clinic specifically identifies this set as a great choice for E85 applications, while superior short pulse width control and precise injector matching help deliver the predictable fueling, tunability, and drivability you want from a performance-focused Tacoma.
Fuel Injector Clinic precisely matches the is141-0525h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. The set includes PGTUSC6 pigtails, with optional PADPUtoT6 plug-and-play adapters available for an installation without cutting or soldering the injector wiring. The injectors include the O-rings required for the listed factory application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is141-0525h
- Flow Rate: 525cc/min
- Application: Toyota Tacoma 1GR-FE
- Engine: 4.0L 1GR-FE V6
- Injector Type: High Impedance / High-Z
- Quantity: Set of 6 injectors
- Flow Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- E85: Identified by FIC as a great option for E85 applications
- Injector Identification: Individually serial numbered
- Included Data: Data Match Sheet with flow matching and latency information
- Included Wiring: PGTUSC6 pigtails
- Optional Wiring: PADPUtoT6 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 525cc/min flow capacity for modified Toyota Tacoma 1GR-FE applications
- Complete six-injector set for the 4.0L 1GR-FE V6
- High-impedance injector design
- Great choice for E85 applications
- Superior short pulse width control helps provide excellent drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered for identification and data tracking
- Detailed Data Match Sheet provides flow matching and latency information for tuning
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- State-of-the-art matching helps provide predictable injector performance for accurate calibration
- Includes PGTUSC6 pigtails
- Optional PADPUtoT6 plug-and-play adapters eliminate the need to cut and solder the injector wiring
- Includes O-rings required for the listed factory application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Match Technology for Accurate Tuning
Consistent injector performance is critical when calibrating a modified 1GR-FE. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors in the is141-0525h set. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. Combined with superior short pulse width control, this provides tuners with the injector consistency and data needed for accurate calibration and excellent drivability.
A Strong Choice for E85 Tacoma Builds
Fuel Injector Clinic specifically identifies the is141-0525h as a great injector set for E85 applications. The 525cc/min flow capacity provides increased fuel delivery for modified 1GR-FE combinations, while FIC's precise matching and short pulse width control help maintain predictable injector behavior throughout the operating range.
Fitment
- 2005 Toyota Tacoma 4.0L 1GR-FE V6
- 2006 Toyota Tacoma 4.0L 1GR-FE V6
- 2007 Toyota Tacoma 4.0L 1GR-FE V6
- 2008 Toyota Tacoma 4.0L 1GR-FE V6
- 2009 Toyota Tacoma 4.0L 1GR-FE V6
- 2010 Toyota Tacoma 4.0L 1GR-FE V6
- 2011 Toyota Tacoma 4.0L 1GR-FE V6
- 2012 Toyota Tacoma 4.0L 1GR-FE V6
- 2013 Toyota Tacoma 4.0L 1GR-FE V6
- 2014 Toyota Tacoma 4.0L 1GR-FE V6
- 2015 Toyota Tacoma 4.0L 1GR-FE V6
Fitment Note: The is141-0525h injector set is designed for the listed Toyota Tacoma 4.0L 1GR-FE applications. If your Tacoma uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Are Fuel Injector Clinic is141-0525h injectors suitable for E85?
Yes. Fuel Injector Clinic specifically identifies the is141-0525h 525cc injector set as a great option for E85 applications. Proper ECU calibration and a fuel system configured for the intended fuel and performance level are required.
What wiring options are available for the is141-0525h injector set?
The set includes PGTUSC6 pigtails. Optional PADPUtoT6 plug-and-play adapters are available for owners who want to connect the injectors to the stock harness without cutting or soldering the injector wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you match your Tacoma's injectors and supporting fuel-system components to your performance goals, fuel choice, and overall combination. If you have questions about the Fuel Injector Clinic is141-0525h injector set, injector sizing, E85 applications, wiring adapters, or fuel-system compatibility, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
