Fuel Injector Clinic 445cc Fuel Injector Set - High Z (is141-0445h) - 2005-2015 Toyota Tacoma 1GR-FE
Upgrade the fuel system in your 2005-2015 Toyota Tacoma 1GR-FE with the Fuel Injector Clinic 445cc High-Z Fuel Injector Set. The is141-0445h includes six 445cc injectors engineered to provide increased fuel delivery with the precise control required for a properly tuned performance application. Fuel Injector Clinic specifically identifies this set as a great option for E85 applications, making it a strong choice for modified 4.0L Tacoma builds that need additional fueling capacity while maintaining responsive, predictable injector operation.
Fuel Injector Clinic precisely matches the is141-0445h set using its proprietary Data Match Technology. Each injector is individually serial numbered, and the included Data Match Sheet provides detailed flow matching and latency information for accurate calibration. FIC flow tests and rates these injectors at 43.5 PSI, or 3 Bar, at 90 degrees F fuel temperature using CF-16B calibration fluid. The set includes PGTUSC6 pigtails, with optional PADPUtoT6 plug-and-play adapters available for installation without cutting or soldering the injector wiring. The injectors include the O-rings required for the listed factory application and are backed by Fuel Injector Clinic's lifetime warranty against failure caused by defects in original manufacture.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is141-0445h
- Flow Rate: 445cc/min
- Application: Toyota Tacoma 1GR-FE
- Engine: 4.0L 1GR-FE V6
- Injector Type: High Impedance / High-Z
- Quantity: Set of 6 injectors
- Flow Matching: Fuel Injector Clinic Data Match Technology
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- E85: Recommended by FIC as a great option for E85 applications
- Injector Identification: Individually serial numbered
- Included Data: Data Match Sheet with flow matching and latency information
- Included Wiring: PGTUSC6 pigtails
- Optional Wiring: PADPUtoT6 plug-and-play adapters
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- 445cc/min flow capacity for modified Toyota Tacoma 1GR-FE applications
- Complete six-injector set for the 4.0L 1GR-FE V6
- High-impedance injector design
- Great choice for E85 applications
- Superior short pulse width control helps provide excellent drivability
- Fuel Injector Clinic Data Match Technology provides precise injector matching
- Each injector is individually serial numbered for identification and data tracking
- Detailed Data Match Sheet provides flow matching and latency information for tuning
- Flow tested and rated at 43.5 PSI, or 3 Bar, at 90 degrees F using CF-16B calibration fluid
- State-of-the-art matching helps provide predictable injector performance for accurate calibration
- Includes PGTUSC6 pigtails
- Optional PADPUtoT6 plug-and-play adapters eliminate the need to cut and solder the injector wiring
- Includes O-rings required for the listed factory application
- Covered by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Data Match Technology for Accurate Tuning
Consistent injector performance is critical when calibrating a modified 1GR-FE. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors in the is141-0445h set. Each injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. Combined with superior short pulse width control, this provides tuners with the consistency and injector data needed for accurate calibration and excellent drivability.
A Strong Choice for E85 Tacoma Builds
Fuel Injector Clinic specifically identifies the is141-0445h as a great injector set for E85 applications. The 445cc/min flow capacity provides additional fuel delivery for modified 1GR-FE combinations, while FIC's precise matching and short pulse width control help maintain predictable injector behavior throughout the operating range.
Fitment
- 2005 Toyota Tacoma 4.0L 1GR-FE V6
- 2006 Toyota Tacoma 4.0L 1GR-FE V6
- 2007 Toyota Tacoma 4.0L 1GR-FE V6
- 2008 Toyota Tacoma 4.0L 1GR-FE V6
- 2009 Toyota Tacoma 4.0L 1GR-FE V6
- 2010 Toyota Tacoma 4.0L 1GR-FE V6
- 2011 Toyota Tacoma 4.0L 1GR-FE V6
- 2012 Toyota Tacoma 4.0L 1GR-FE V6
- 2013 Toyota Tacoma 4.0L 1GR-FE V6
- 2014 Toyota Tacoma 4.0L 1GR-FE V6
- 2015 Toyota Tacoma 4.0L 1GR-FE V6
Fitment Note: The is141-0445h injector set is designed for the listed Toyota Tacoma 4.0L 1GR-FE applications. If your Tacoma uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to verify proper injector fitment.
FAQs
Are Fuel Injector Clinic is141-0445h injectors suitable for E85?
Yes. Fuel Injector Clinic specifically identifies the is141-0445h 445cc injector set as a great option for E85 applications. Proper ECU calibration and a fuel system configured for the intended fuel and performance level are required.
What wiring options are available for the is141-0445h injector set?
The set includes PGTUSC6 pigtails. Fuel Injector Clinic currently offers PADPUtoT6 plug-and-play adapters as an optional alternative for connecting the injectors to the stock harness without cutting or soldering the injector wiring.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing can help you match your Tacoma's injectors and supporting fuel-system components to your performance goals, fuel choice, and overall combination. If you have questions about the Fuel Injector Clinic is141-0445h injector set, injector sizing, E85 applications, wiring adapters, or fuel-system compatibility, email sales@beefcakeracing.com or call 1-855-827-7223 for assistance.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
