Fuel Injector Clinic 1200cc Fuel Injector Set - High Z (is140-1200h) - Scion tC / xB / Toyota 1ZZ
Step up the fuel system in your performance Scion or compatible Toyota 1ZZ application with the Fuel Injector Clinic is140-1200h 1200cc High-Z injector set. This matched set of four saturated, high-impedance ball and seat injectors gives modified and high-horsepower combinations the additional fuel capacity they demand while retaining the short pulse width control and drivability that matter on the street. Previously offered as IS140-1100H, the current is140-1200h set combines serious flow capability with FIC's precise Data Match Technology for consistent injector performance across all four cylinders.
Each injector is individually serial numbered and supplied with detailed matching and latency information on the included Data Match Sheet. Fuel Injector Clinic tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. The set includes PGTJETR4Q solder-in pigtails, while optional PADPJtoT4 plug-and-play adapters provide an alternative for owners who want to avoid cutting and soldering the applicable factory harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is140-1200h
- Previous Part Number: IS140-1100H
- Flow Rate: 1200cc/min
- Injector Quantity: 4
- Injector Type: Saturated / high impedance ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTJETR4Q
- Optional Plug-and-Play Adapters: PADPJtoT4
- O-Rings: Included as required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete matched set of four 1200cc/min performance fuel injectors
- Saturated, high-impedance ball and seat injector design
- Designed to provide high fuel flow with excellent short pulse width control
- Precisely matched using Fuel Injector Clinic Data Match Technology
- Each injector is individually serial numbered for identification and documentation
- Included Data Match Sheet provides detailed flow matching and latency information
- Flow tested and rated at 43.5 PSI (3 Bar) with fuel at 90 degrees F
- Tested using CF-16B calibration fluid
- Precise matching and tight injector control help support easier tuning and strong drivability
- PGTJETR4Q solder-in pigtails included
- Optional PADPJtoT4 plug-and-play adapters eliminate the need to cut or solder the applicable factory harness
- Supplied with O-rings required for the listed factory application
- Built using brand-new, unused injectors rather than remanufactured or core-program components
- Lifetime warranty against failure caused by defects in original manufacture
Data Match Technology
High-flow injectors need more than an impressive cc rating to deliver the results a serious build demands. Consistency between cylinders is critical to accurate fueling, which is why Fuel Injector Clinic precisely matches the injectors in the is140-1200h set using its proprietary Data Match Technology. This gives the ECU and tuner a more consistent foundation for controlling fuel delivery throughout the operating range.
Each injector is individually serial numbered, and its results are documented on the included Data Match Sheet. The supplied flow matching and latency information gives tuners valuable injector-specific data instead of relying solely on a nominal flow rating.
Built for Precise High-Performance Fuel Delivery
Fuel Injector Clinic tests and rates these 1200cc injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. Superior short pulse width control and precise matching help maintain controllable fueling at idle and part throttle while providing the additional injector capacity demanded as engine load and power increase.
That balance is especially valuable on modified street cars where outright fuel capacity cannot come at the expense of drivability. With proper calibration and a correctly matched fuel system, the is140-1200h gives performance-oriented Scion and Toyota builds substantial fueling headroom without sacrificing the precision expected from a modern High-Z injector.
Wiring and Installation
The is140-1200h injector set includes PGTJETR4Q solder-in pigtails. Installation with the included pigtails requires replacing the applicable injector connectors on the vehicle wiring harness and soldering the supplied pigtails into place. Optional PADPJtoT4 plug-and-play adapters are available for customers who prefer a connection that does not require cutting or soldering the applicable factory harness.
Fuel Injector Clinic supplies the injectors with the O-rings required for the listed factory application. Vehicles using aftermarket fuel rails or other non-standard fuel-system configurations should be verified before ordering to ensure the correct injector setup is selected.
Fitment
- 2005 Scion tC
- 2006 Scion tC
- 2007 Scion tC
- 2008 Scion tC
- 2009 Scion tC
- 2010 Scion tC
- 2011 Scion tC
- 2012 Scion tC
- 2013 Scion tC
- 2014 Scion tC
- 2015 Scion tC
- 2016 Scion tC
- 2008 Scion xB
- 2009 Scion xB
- 2010 Scion xB
- 2011 Scion xB
- 2012 Scion xB
- 2013 Scion xB
- 2014 Scion xB
- 2015 Scion xB
- Select Toyota applications utilizing the 1ZZ engine
FAQs
Is Fuel Injector Clinic is140-1200h the replacement for IS140-1100H?
Yes. Fuel Injector Clinic identifies the current is140-1200h 1200cc injector set as the successor to the previously listed IS140-1100H part number.
What wiring components are included with the is140-1200h injector set?
The set includes PGTJETR4Q solder-in pigtails. Optional PADPJtoT4 plug-and-play adapters are available for customers who prefer to connect the injectors without cutting or soldering the applicable factory wiring harness.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and the supporting fuel-system components needed to build a properly matched performance combination. Whether you are upgrading a modified Scion tC, Scion xB, or compatible Toyota 1ZZ application, our team can help you select the injector size and supporting components appropriate for your setup and performance goals. Questions about Fuel Injector Clinic is140-1200h? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
