Fuel Injector Clinic 650cc Fuel Injector Set - High Z (is140-0650h) - Scion tC / xB / Toyota 1ZZ
Upgrade the fuel system in your Scion or compatible Toyota application with the Fuel Injector Clinic is140-0650h 650cc High-Z fuel injector set. This complete set of four saturated, high-impedance ball and seat injectors provides increased fuel capacity for modified performance combinations while retaining the linearity and short pulse width repeatability needed for precise tuning and strong drivability. Fuel Injector Clinic combines modern injector technology with its proprietary Data Match Technology to deliver consistent fuel delivery across the matched set.
Each injector is individually serial numbered, with detailed results supplied on the included Data Match Sheet for comprehensive flow matching and latency information. FIC flow tests and rates these injectors at 43.5 PSI (3 Bar) with fuel at 90 degrees F using CF-16B calibration fluid. The set includes PGTUSC4 solder-in pigtails, while optional PADPUtoT4 plug-and-play adapters provide an installation option without cutting or soldering the factory wiring harness.
Specifications
- Manufacturer: Fuel Injector Clinic
- Part Number: is140-0650h
- Flow Rate: 650cc/min
- Injector Quantity: 4
- Injector Type: Saturated / high impedance ball and seat
- Impedance: High-Z / high impedance
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Flow Test Pressure: 43.5 PSI (3 Bar)
- Flow Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Pigtails: PGTUSC4
- Optional Plug-and-Play Adapters: PADPUtoT4
- O-Rings: Included as required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Complete set of four 650cc/min performance fuel injectors
- Saturated, high-impedance ball and seat injector design
- Excellent linearity and short pulse width repeatability
- Fuel Injector Clinic proprietary Data Match Technology
- Each injector is individually serial numbered
- Detailed Data Match Sheet provides flow matching and latency information
- Flow tested at 43.5 PSI (3 Bar) and 90 degrees F using CF-16B calibration fluid
- Superior short pulse width control supports precise tuning and strong drivability
- PGTUSC4 solder-in pigtails included
- Optional PADPUtoT4 plug-and-play adapters eliminate the need to cut or solder the factory harness
- Brand-new injectors rather than remanufactured or core-program units
- Includes the required O-rings for the listed factory application
- Lifetime warranty against failure caused by defects in original manufacture
Data Matched for Consistent Performance
Choosing the right injector is about more than flow capacity. Consistent fuel delivery across every cylinder is critical to a properly calibrated performance engine. Fuel Injector Clinic uses its proprietary Data Match Technology to precisely match the injectors within the is140-0650h set. Each injector is individually serial numbered, and its results are documented on the supplied Data Match Sheet with detailed flow matching and latency information.
Superior short pulse width control and precise matching help make these 650cc injectors easier to tune while supporting the smooth drivability expected from a properly calibrated street or performance combination. For builds that need more fueling capability than the factory injectors can provide without immediately stepping into a much larger injector, the FIC 650cc set offers a well-balanced performance upgrade.
Wiring and Installation
The is140-0650h injector set requires an injector plug conversion when used with the applicable factory wiring harness. Included PGTUSC4 solder-in pigtails can be used to replace the existing injector plugs, or optional PADPUtoT4 plug-and-play adapters can connect the injectors to the stock harness without cutting or soldering.
Fuel Injector Clinic uses brand-new, unused injectors for its performance applications rather than relying on remanufactured or core-program injectors. The injectors are configured with the O-rings required for the listed factory application. If your vehicle uses an aftermarket fuel rail or another nonstandard fuel-system configuration, contact Beefcake Racing before ordering to verify proper fitment.
Fitment
- 2005 Scion tC
- 2006 Scion tC
- 2007 Scion tC
- 2008 Scion tC
- 2009 Scion tC
- 2010 Scion tC
- 2011 Scion tC
- 2012 Scion tC
- 2013 Scion tC
- 2014 Scion tC
- 2015 Scion tC
- 2016 Scion tC
- 2008 Scion xB
- 2009 Scion xB
- 2010 Scion xB
- 2011 Scion xB
- 2012 Scion xB
- 2013 Scion xB
- 2014 Scion xB
- 2015 Scion xB
- Select Toyota applications utilizing the 1ZZ engine
FAQs
What wiring is required for the Fuel Injector Clinic is140-0650h injector set?
The injectors require a plug conversion. PGTUSC4 solder-in pigtails are included for replacing the existing injector plugs, or optional PADPUtoT4 plug-and-play adapters can connect the injectors to the applicable factory harness without cutting or soldering.
What does Fuel Injector Clinic Data Match Technology provide?
Data Match Technology precisely matches the injectors within the set. Each injector is individually serial numbered, and the supplied Data Match Sheet provides detailed flow matching and latency information to support accurate calibration and consistent fuel delivery.
Why Buy Fuel Injector Clinic Injectors From Beefcake Racing?
Beefcake Racing is your source for Fuel Injector Clinic injectors and the supporting fuel-system components needed for serious street and performance builds. Whether you are upgrading a Scion tC, Scion xB, or compatible Toyota application, our team can help you select the injector and supporting components appropriate for your combination. Questions about the Fuel Injector Clinic is140-0650h? Email sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
