Fuel Injector Clinic 1650cc Fuel Injector Set - High Z (is135-1650h) - 1991 - 1999 Mitsubishi 3000GT
Give your 1991 - 1999 Mitsubishi 3000GT the fuel capacity needed for serious horsepower with the Fuel Injector Clinic 1650cc High-Z Fuel Injector Set. Part number is135-1650h includes six saturated, high-impedance ball and seat injectors engineered to combine massive fuel delivery with excellent idle performance, linearity, and short pulse width control. For high-output street and race builds running gasoline, E85, or race fuel, these injectors provide substantial fueling headroom while retaining the precise response needed for accurate tuning and strong drivability.
Fuel Injector Clinic's 1650cc/min High-Z injector uses stainless alloy valve construction for broad fuel compatibility, including pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Each six-injector set is precisely matched using FIC's proprietary Data Match Technology, with every injector individually serial numbered and its results supplied on a detailed Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid. The application-specific is135-1650h also features a plug-and-play fit to the OEM injector harness for a cleaner, simpler installation.
Specifications
- Part Number: is135-1650h
- Injector Flow Rate: 1650cc/min
- Quantity: Set of 6 injectors
- Application: 1991 - 1999 Mitsubishi 3000GT
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and seat
- Valve Construction: Stainless alloy
- Fuel Compatibility: Pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet with flow matching and latency information
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Electrical Connection: Plug-and-play fit to OEM harness
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1650cc/min High-Z fuel injectors for 1991 - 1999 Mitsubishi 3000GT applications
- Massive fuel-flow capability for serious high-horsepower street and race builds
- Saturated, high-impedance ball and seat injector design
- Excellent idle performance for a high-flow performance injector
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability for precise low-load fueling
- Plug-and-play fit to the OEM injector harness with no plug conversion required
- Stainless alloy valve construction provides broad performance-fuel compatibility
- Compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels
- Proprietary Data Match Technology precisely matches all six injectors within the set
- Each injector is individually serial numbered for identification and matching data
- Detailed Data Match Sheet supplies flow matching and latency information for accurate ECU calibration
- Flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F using CF-16B calibration fluid
- Includes O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
Massive Fuel Capacity with Street-Friendly Control
Moving to a 1650cc injector gives a high-output 3000GT enormous fuel-delivery potential, but maximum flow is only part of what makes a performance injector work well. The ECU still needs precise control when the engine requires only a small portion of the injector's available capacity. FIC engineered its 1650cc High-Z injector for excellent idle performance and superior short pulse width control, helping provide predictable fueling during idle and part-throttle operation while retaining the capacity needed for serious horsepower.
FIC's Data Match Technology further improves consistency by precisely matching all six injectors and supplying detailed flow and latency information for calibration. Stainless alloy valve construction also gives the 1650cc injector exceptional fuel versatility, allowing it to support pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. The is135-1650h is configured for plug-and-play connection to the OEM 3000GT injector harness, eliminating the injector plug conversion required by several other FIC injector sizes for this application. If your 3000GT uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper fitment.
Fitment
- 1991 Mitsubishi 3000GT
- 1992 Mitsubishi 3000GT
- 1993 Mitsubishi 3000GT
- 1994 Mitsubishi 3000GT
- 1995 Mitsubishi 3000GT
- 1996 Mitsubishi 3000GT
- 1997 Mitsubishi 3000GT
- 1998 Mitsubishi 3000GT
- 1999 Mitsubishi 3000GT
FAQs
Does the Fuel Injector Clinic is135-1650h require an injector plug conversion?
No. The is135-1650h is configured as a plug-and-play fit to the OEM injector harness for the Mitsubishi 3000GT application, eliminating the need to splice replacement injector pigtails into the factory wiring or use plug conversion adapters.
Can FIC is135-1650h 1650cc injectors be used with E85, Q16, and other race fuels?
Yes. The 1650cc High-Z injector uses stainless alloy valve construction and is compatible with pump gasoline, E85, Q16, VP Import, FTW, and other MTBE oxygenated race fuels. Its excellent idle performance and short pulse width control also make it well suited to high-horsepower street applications when properly calibrated.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel-system components for Mitsubishi 3000GT builds. Whether your combination runs pump gasoline, E85, or race fuel, proper injector sizing and calibration are critical to achieving the fuel delivery, performance, and drivability your build demands.
Have questions about injector sizing, fuel compatibility, installation, or fitment? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
