Fuel Injector Clinic 1200cc (Previously 1100cc) Fuel Injector Set - High Z (is135-1200h) - 1991 - 1999 Mitsubishi 3000GT
Give your 1991 - 1999 Mitsubishi 3000GT the fuel delivery capability needed for serious performance with the Fuel Injector Clinic 1200cc High-Z Fuel Injector Set. Part number is135-1200h includes six saturated, high-impedance ball and seat injectors engineered for precise fuel control, excellent short pulse width performance, and strong drivability. Previously sold as IS135-1100H, this updated 1200cc set combines substantial fueling capacity with FIC's advanced injector matching technology, making it an excellent upgrade for performance-oriented 3000GT builds that need more fuel without giving up accurate ECU control.
Fuel Injector Clinic precisely matches each six-injector set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid. The is135-1200h also features a drop-in plug fit for the factory application, eliminating the injector connector conversion required by some aftermarket injector configurations.
Specifications
- Part Number: is135-1200h
- Previous Part Number: IS135-1100H
- Injector Flow Rate: 1200cc/min
- Quantity: Set of 6 injectors
- Application: 1991 - 1999 Mitsubishi 3000GT
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and seat
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet with flow matching and latency information
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Electrical Connection: Drop-in plug fit
- Seals: Includes O-rings required for the listed factory application
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1200cc/min High-Z fuel injectors for 1991 - 1999 Mitsubishi 3000GT applications
- Previously offered as Fuel Injector Clinic part number IS135-1100H
- High-flow fuel delivery for modified and high-output 3000GT builds
- Saturated, high-impedance ball and seat injector construction
- Superior short pulse width control for precise low-load fueling
- State-of-the-art matching helps provide excellent drivability and predictable tuning
- Drop-in plug fit simplifies installation with the factory electrical connection
- Proprietary Data Match Technology precisely matches all six injectors within the set
- Each injector is individually serial numbered for identification and matching data
- Detailed Data Match Sheet provides flow matching and latency information for ECU calibration
- Flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F using CF-16B calibration fluid
- Includes O-rings required for the listed factory application
- Backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
High-Flow Fueling with Drop-In Plug Fit
Injector capacity is only part of the equation when building a high-performance 3000GT. The ECU must also be able to accurately control the injectors during idle, cruising, part throttle, and high-load operation. FIC's 1200cc High-Z injectors combine substantial flow capability with superior short pulse width control and precise matching, helping deliver the predictable fuel metering required for accurate tuning and strong drivability.
Data Match Technology gives tuners detailed flow and latency information for the individual injectors rather than relying solely on a nominal flow rating. The is135-1200h also offers a drop-in plug fit, simplifying the electrical side of the installation without requiring an injector connector conversion. All O-rings needed for the listed factory application are included. If your 3000GT uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper injector fitment.
Fitment
- 1991 Mitsubishi 3000GT
- 1992 Mitsubishi 3000GT
- 1993 Mitsubishi 3000GT
- 1994 Mitsubishi 3000GT
- 1995 Mitsubishi 3000GT
- 1996 Mitsubishi 3000GT
- 1997 Mitsubishi 3000GT
- 1998 Mitsubishi 3000GT
- 1999 Mitsubishi 3000GT
FAQs
Is the Fuel Injector Clinic is135-1200h the injector set previously sold as IS135-1100H?
Yes. Fuel Injector Clinic identifies is135-1200h as the current 1200cc High-Z Mitsubishi 3000GT injector set that was previously offered as IS135-1100H. The set includes six saturated, high-impedance ball and seat injectors.
Does the FIC is135-1200h require an injector plug conversion?
No. Fuel Injector Clinic specifies the is135-1200h as a drop-in plug fit for the listed Mitsubishi 3000GT application, simplifying installation by eliminating the injector connector conversion required with some aftermarket injectors.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel-system components for Mitsubishi 3000GT builds. Whether you are upgrading a modified street car or putting together a serious high-output combination, proper injector sizing and calibration are critical to achieving the fuel delivery, performance, and drivability your setup demands.
Have questions about injector sizing, installation, or fitment? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
