Fuel Injector Clinic 1000cc Fuel Injector Set - High Z (is135-1000h) - 1991 - 1999 Mitsubishi 3000GT
Give your 1991 - 1999 Mitsubishi 3000GT the fuel delivery capability needed for serious performance with the Fuel Injector Clinic 1000cc High-Z Fuel Injector Set. Part number is135-1000h includes six saturated, high-impedance ball and seat injectors engineered for substantial fuel flow, excellent linearity, and repeatable short pulse width performance. For modified and high-output 3000GT builds that have outgrown smaller injectors, this 1000cc set provides the fueling headroom needed for increased power while retaining the precise control tuners need for accurate calibration and strong drivability.
Fuel Injector Clinic precisely matches each six-injector set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid. PGTUSC6 solder-in pigtails are included for the required injector connector conversion, or optional PADPUtoJ6 plug-and-play adapters can be selected to connect the injectors without cutting or soldering the vehicle wiring harness.
Specifications
- Part Number: is135-1000h
- Injector Flow Rate: 1000cc/min
- Quantity: Set of 6 injectors
- Application: 1991 - 1999 Mitsubishi 3000GT
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and seat
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet with flow matching and latency information
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC6
- Optional Plug-and-Play Adapters: PADPUtoJ6
- Wiring Requirement: Injector plug conversion required when using the included pigtails
- Seals: Includes O-rings required for the listed factory application
- Injector Condition: Brand-new, unused injectors
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 1000cc/min High-Z fuel injectors for 1991 - 1999 Mitsubishi 3000GT applications
- High-flow fuel delivery for modified and high-output 3000GT builds
- Saturated, high-impedance ball and seat injector construction
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability for precise low-load fueling
- Proprietary Data Match Technology precisely matches the injectors within the set
- Each injector is individually serial numbered for identification and matching data
- Detailed Data Match Sheet provides flow matching and latency information for accurate ECU calibration
- Flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 solder-in pigtails for injector plug conversion
- Optional PADPUtoJ6 plug-and-play adapters eliminate the need to cut or solder the vehicle wiring harness
- Includes O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
1000cc Fueling Capacity with Precise Injector Control
A 1000cc injector brings serious fuel capacity to a performance 3000GT, but maximum flow is only one part of the equation. Accurate fuel delivery at short pulse widths is critical for idle, cruising, and part-throttle operation. FIC combines substantial flow capability with superior short pulse width control and precise injector matching, giving the ECU and tuner a predictable foundation for calibration across a broad operating range.
FIC's Data Match Technology further improves consistency by precisely matching the six injectors and supplying detailed flow and latency information for tuning. Part number is135-1000h requires an injector connector conversion when using the included PGTUSC6 pigtails. For owners who prefer not to cut or solder the factory wiring harness, optional PADPUtoJ6 plug-and-play adapters provide an alternative installation solution. FIC uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors. If your 3000GT uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper fitment.
Fitment
- 1991 Mitsubishi 3000GT
- 1992 Mitsubishi 3000GT
- 1993 Mitsubishi 3000GT
- 1994 Mitsubishi 3000GT
- 1995 Mitsubishi 3000GT
- 1996 Mitsubishi 3000GT
- 1997 Mitsubishi 3000GT
- 1998 Mitsubishi 3000GT
- 1999 Mitsubishi 3000GT
FAQs
Does the Fuel Injector Clinic is135-1000h injector set require wiring modifications?
Yes, when using the included PGTUSC6 pigtails, the existing injector plugs on the vehicle wiring harness must be replaced. Optional PADPUtoJ6 plug-and-play adapters can be selected instead, allowing the injectors to connect without cutting or soldering the factory wiring harness.
How are the FIC is135-1000h 1000cc injectors matched and tested?
Fuel Injector Clinic precisely matches the six injectors using its proprietary Data Match Technology. Each injector is individually serial numbered, with flow matching and latency results supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel-system components for Mitsubishi 3000GT builds. Whether you are upgrading a modified street car or building a serious high-output combination, proper injector sizing, installation, and calibration are critical to achieving the fuel delivery, performance, and drivability your setup demands.
Have questions about injector sizing, wiring, or fitment? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
