Fuel Injector Clinic 775cc Fuel Injector Set - High Z (is135-0775h) - 1991 - 1999 Mitsubishi 3000GT
Upgrade the fuel delivery capability of your 1991 - 1999 Mitsubishi 3000GT with the Fuel Injector Clinic 775cc High-Z Fuel Injector Set. Part number is135-0775h includes six saturated, high-impedance ball and seat injectors engineered for excellent linearity, short pulse width repeatability, and consistent fuel delivery. For modified and higher-output 3000GT builds that need more fuel capacity than smaller injectors can provide, this 775cc set delivers increased flow while retaining the precise control needed for accurate tuning and strong drivability.
Fuel Injector Clinic precisely matches each six-injector set using its proprietary Data Match Technology. Every injector is individually serial numbered, with detailed flow matching and latency information supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid. PGTUSC6 solder-in pigtails are included for the required injector connector conversion, or optional PADPUtoJ6 plug-and-play adapters can be selected to connect the injectors without cutting or soldering the vehicle wiring harness.
Specifications
- Part Number: is135-0775h
- Injector Flow Rate: 775cc/min
- Quantity: Set of 6 injectors
- Application: 1991 - 1999 Mitsubishi 3000GT
- Injector Type: Saturated / High Impedance
- Injector Design: Ball and seat
- Matching Technology: Fuel Injector Clinic Data Match Technology
- Injector Identification: Individually serial numbered
- Injector Data: Data Match Sheet with flow matching and latency information
- Test Pressure: 43.5 PSI / 3 Bar
- Test Fuel Temperature: 90 degrees F
- Calibration Fluid: CF-16B
- Included Pigtails: PGTUSC6
- Optional Plug-and-Play Adapters: PADPUtoJ6
- Wiring Requirement: Injector plug conversion required when using the included pigtails
- Seals: Includes O-rings required for the listed factory application
- Injector Condition: Brand-new, unused injectors
- Warranty: Lifetime warranty against failure caused by defects in original manufacture
Features
- Six 775cc/min High-Z fuel injectors for 1991 - 1999 Mitsubishi 3000GT applications
- Increased fuel-flow capability for modified and higher-output 3000GT builds
- Saturated, high-impedance ball and seat injector construction
- Excellent linearity for consistent and predictable fuel delivery
- Superior short pulse width control and repeatability for precise low-load fueling
- Proprietary Data Match Technology precisely matches all six injectors within the set
- Each injector is individually serial numbered for identification and matching data
- Detailed Data Match Sheet provides flow matching and latency information for accurate ECU calibration
- Flow tested and rated at 43.5 PSI / 3 Bar and 90 degrees F using CF-16B calibration fluid
- Includes PGTUSC6 solder-in pigtails for injector plug conversion
- Optional PADPUtoJ6 plug-and-play adapters eliminate the need to cut or solder the vehicle wiring harness
- Includes O-rings required for the listed factory application
- Uses brand-new, unused injectors rather than remanufactured or core-program injectors
- Backed by Fuel Injector Clinic's lifetime warranty against defects in original manufacture
High-Flow Performance with Precise Fuel Control
A performance injector needs to deliver more than additional fuel at high load. Accurate control during idle, cruising, and part-throttle operation is equally important to drivability and tuning. Fuel Injector Clinic's 775cc High-Z injectors combine increased flow capability with excellent linearity and superior short pulse width control, helping the ECU accurately meter fuel across a broad operating range while providing the additional capacity required by modified 3000GT builds.
FIC's Data Match Technology further improves consistency by precisely matching all six injectors and supplying detailed flow and latency information for calibration. Part number is135-0775h requires an injector connector conversion when using the included PGTUSC6 pigtails. For owners who want to retain the factory wiring harness without cutting or soldering, optional PADPUtoJ6 plug-and-play adapters provide an alternative installation solution. FIC uses brand-new, unused injectors for its performance applications rather than remanufactured or core-program injectors. If your 3000GT uses an aftermarket fuel rail or another non-standard fuel-system configuration, contact Beefcake Racing before ordering to confirm proper fitment.
Fitment
- 1991 Mitsubishi 3000GT
- 1992 Mitsubishi 3000GT
- 1993 Mitsubishi 3000GT
- 1994 Mitsubishi 3000GT
- 1995 Mitsubishi 3000GT
- 1996 Mitsubishi 3000GT
- 1997 Mitsubishi 3000GT
- 1998 Mitsubishi 3000GT
- 1999 Mitsubishi 3000GT
FAQs
Does the Fuel Injector Clinic is135-0775h injector set require wiring modifications?
Yes, when using the included PGTUSC6 pigtails, the existing injector plugs on the vehicle wiring harness must be replaced. Optional PADPUtoJ6 plug-and-play adapters can be selected instead, allowing the injectors to connect without cutting or soldering the factory wiring harness.
How are the FIC is135-0775h 775cc injectors matched and tested?
Fuel Injector Clinic precisely matches the six injectors using its proprietary Data Match Technology. Each injector is individually serial numbered, with flow matching and latency results supplied on the included Data Match Sheet. The injectors are flow tested and rated at 43.5 PSI, or 3 Bar, with fuel temperature at 90 degrees F using CF-16B calibration fluid.
Order Your Fuel Injector Clinic Injectors from Beefcake Racing
Beefcake Racing is your source for Fuel Injector Clinic injectors and supporting performance fuel-system components for Mitsubishi 3000GT builds. Whether you are upgrading a modified street car or building a higher-output performance combination, proper injector sizing, installation, and calibration are critical to getting the fuel delivery, performance, and drivability your setup demands.
Have questions about injector sizing, wiring, or fitment? Contact Beefcake Racing at sales@beefcakeracing.com or call 1-855-827-7223.
CA Residents: WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
